09-09-2002, 05:33 PM | #1 |
Registered User
Join Date: Jun 2002
Posts: 15
|
3904390 heads
Should I use these heads or buy some aftermarket? They are currently on my 402, but the motor seems to lack power. I was told these are good heads if you increase the valve sizes. Other people tell me after machining costs I would be better off buying new.
I want to do the Edelbrock performer intake, cam, 750 cfm carb combo at the same time I work on the heads. Any advise would be helpfull. Here are the specs I found: 3904390 66-67 2.06/1.72 325, 350, 390 & 400 98 CC Chambers L-34/L-35/L-36/L-68 396/427 |
09-09-2002, 06:00 PM | #2 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
damn those sound like some damn good head,s 98 cc's !!!? damn!you could have hella lot of CR if you have the open chamber pistons! damn....
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|