Experience with Powdercoating coil springs ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BubbaGreen · 04-22-2002, 10:44 PM

How does powdercoated coil springs hold up?
Is it worth doing, or will it chip off from
the spring flexing?

------------------
71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73
See it at www.prismnet.com/~grzanich

Alexis · 04-22-2002, 10:48 PM

mostly all after market spring are powder coated.

------------------
Mechanic @ California Concept
Britney: 1970 2wd K/5 Blazer (Frame up)
Jessica: 1967 2wd SWB (pops daily driver)
Helga: 1972 4x4 3/4ton LWB (my daily driver)

AIM:Alexmart1
Mountain View, Cali

[This message has been edited by alexmart1 (edited April 22, 2002).]

04-22-2002, 10:44 PM	#1
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Experience with Powdercoating coil springs ? How does powdercoated coil springs hold up? Is it worth doing, or will it chip off from the spring flexing? ------------------ 71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73 See it at www.prismnet.com/~grzanich __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-22-2002, 10:48 PM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	mostly all after market spring are powder coated. ------------------ Mechanic @ California Concept Britney: 1970 2wd K/5 Blazer (Frame up) Jessica: 1967 2wd SWB (pops daily driver) Helga: 1972 4x4 3/4ton LWB (my daily driver) AIM:Alexmart1 Mountain View, Cali [This message has been edited by alexmart1 (edited April 22, 2002).]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.