Header / alt. bracket problem 67 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CoolRide · 01-12-2006, 02:24 AM

Hello all.

I just purchased a 67 c10 with the original 283 and I was going to order a set of headers for it. However I noticed, much to my dismay, that I will no longer have a way to hook up my altanator bracket, as the current one bolts into the front end of the drivers side exhaust manafold! Does anybody have any experience whith this switch? My pops got a 68 and I put a set of headers on it no problem but it mounts differantly (his has a 350). Anyway I thought maybe you could point me in the direction of a place that sells a bracket for this conversion or?

Thank you.

CoolRide

MDC · 01-12-2006, 03:08 AM

Here they are from Summit Racing. You'll need them both.

SUM-G4050

SUM-G4051

CoolRide · 01-12-2006, 03:38 PM

Quote:

Originally Posted by MDC

Here they are from Summit Racing. You'll need them both.

SUM-G4050

SUM-G4051

Ah Ha! Thank you MDC! I looked at my summit cat. but I didn't know what the bracket I needed might look like. Thank you again

CoolRide

MDC · 01-12-2006, 03:46 PM

No Problem. I had to have them and the board members helped me. I bought them both at a Pep Boys Sat. But paid way more than Summit. Summit has them for about $6 ea. I think if you go to their site, they have Hooker or Hedman brand in black but you will pay for the name.

BTW welcome from N Texas.

matt67350 · 01-12-2006, 04:44 PM

Alt bracket and arm from a 72 V8 will work also.
You can pick them up a swap meets for around $25.00.

01-12-2006, 02:24 AM	#1
CoolRide Registered User Join Date: Dec 2005 Location: Spokane Washington Posts: 85	Header / alt. bracket problem 67 c10 Hello all. I just purchased a 67 c10 with the original 283 and I was going to order a set of headers for it. However I noticed, much to my dismay, that I will no longer have a way to hook up my altanator bracket, as the current one bolts into the front end of the drivers side exhaust manafold! Does anybody have any experience whith this switch? My pops got a 68 and I put a set of headers on it no problem but it mounts differantly (his has a 350). Anyway I thought maybe you could point me in the direction of a place that sells a bracket for this conversion or? Thank you. CoolRide

01-12-2006, 03:08 AM	#2
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: Header / alt. bracket problem 67 c10 Here they are from Summit Racing. You'll need them both. SUM-G4050 SUM-G4051 __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape Last edited by MDC; 01-12-2006 at 03:23 AM.

01-12-2006, 03:46 PM	#4
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: Header / alt. bracket problem 67 c10 No Problem. I had to have them and the board members helped me. I bought them both at a Pep Boys Sat. But paid way more than Summit. Summit has them for about $6 ea. I think if you go to their site, they have Hooker or Hedman brand in black but you will pay for the name. BTW welcome from N Texas. __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

01-12-2006, 04:44 PM	#5
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Re: Header / alt. bracket problem 67 c10 Alt bracket and arm from a 72 V8 will work also. You can pick them up a swap meets for around $25.00. __________________ 69 swb stepside, rebuild and upgrade in progress

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.