02-17-2006, 11:38 AM | #1 |
Registered User
Join Date: Sep 2004
Location: Teeswater, Ontario, Canada
Posts: 173
|
Wheel Studs & rims
Do I need to install longer wheel studs on my 72 LWB 1/2 if I install american racing Torque Thrusts, or Cragar SS? Also what is the backspacing needed to run on the truck for a 15x8 rim. I'll be running either 255/70/15 up front and 285/70/15 on the rear or 275/60/15 all around on a stock height truck.
__________________
Jamie _______________________________ 72 Chevy Cheyenne 350/th350 LWB 03 Chevy Silverado Sporty Shorty 4.8L |
02-17-2006, 11:43 AM | #2 |
Senior Member
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,798
|
Re: Wheel Studs & rims
my 265x70x15's are on the truck corvette ralley wheels 15x8 and they have 4" backspacing. I did add 1.5" spacers on the rear to even out with the front.
|
02-17-2006, 12:24 PM | #3 |
Registered User
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
|
Re: Wheel Studs & rims
I PUT A SET OF 315 TRUCK RADIAL TAs ON 10 INCH WIDE CRAGERS WITH 4" BACKSPACING. THEY CLEARED BY ABOUT 1" & NO LONGER STUDS WERE NESSISARY. IF YOU USE SPACERS OR ANYTHING ELSE BETWEEN THE RIM & THE HUB YOUR ON YOUR OWN, AS I KNOW NOTHING ABOUT THIS PRACTICE. JOHN
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|