![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2002
Location: Dover AFB Delaware
Posts: 159
|
6 lug stock rotors
Im about to get a set of stock 72 C-10 disc brake spindles for my 67 but Id like to keep my 6 lug set up. All the local parts stores seem to only show a 5 lug available. Is there a different year I should be looking for to get 6 lug rotors for my truck? Thanks all
|
![]() |
![]() |
![]() |
#2 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: 6 lug stock rotors
No, the 6 lug rotors are special rotors that the aftermarket companies have made up special. You have to pay the bucks and buy them from a vendor.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: 6 lug stock rotors
From what I have read on here, and what some have done, is use 88-98 3/4 Ton 2X4 light duty rotors. They are 6 lug and you will have to change the lugs. They are metric. They're available at Autozone.
http://67-72chevytrucks.com/vboard/s...ad.php?t=35042 This should answer your questions.....
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Mar 2005
Location: weatherford,texas
Posts: 1,003
|
Re: 6 lug stock rotors
i bought six lug rotors for my'67 from early classic enterprises(www.earlyclassic.com). they are new,not redrilled 5 lug rotors.all you need to do is install new bearings for a '72.
Last edited by lilred67; 04-08-2006 at 11:08 AM. |
![]() |
![]() |
![]() |
#5 |
Like a Rock!
Join Date: May 2002
Location: USA
Posts: 1,092
|
Re: 6 lug stock rotors
lilred67, are they installed yet? any probs?
__________________
69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park! ![]() |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Mar 2005
Location: weatherford,texas
Posts: 1,003
|
Re: 6 lug stock rotors
yes, they have about 7,000 miles on them.no problems,i highly recommend them.
|
![]() |
![]() |
![]() |
#7 |
Like a Rock!
Join Date: May 2002
Location: USA
Posts: 1,092
|
Re: 6 lug stock rotors
Cool, what other front end parts or swaps did you have to use to get disc brakes on your 67?
__________________
69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park! ![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2005
Location: Spring Branch Texas
Posts: 177
|
Re: 6 lug stock rotors
I used the entire cross member and steering from an 88 sub. I thought I could use the 91 6 lug rotors but the centerline of the rotor is ½ “ off to the outside and the calipers won’t fit. Now I need to find out if the aftermarket rotors from classic enterprises and such will fit the 88 sub spindles or if I’m going to have to change spindles. Now I’m wondering if the 91 spindles will fit?? If I get it figured out I’ll post the results…
__________________
If you can't drive it park it! If you can't park it milk it! |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Mar 2005
Location: weatherford,texas
Posts: 1,003
|
Re: 6 lug stock rotors
i used upper a-frames, spindles,and all the steering linkage from a '72.had to replace lower ball joints to the '72 style.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|