Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-15-2006, 11:08 AM | #1 |
Registered User
Join Date: Mar 2005
Posts: 92
|
A retro-roller cam swap advice in 350sbc
Im thinking of doing a cam swap in my 350sbc, its got for now 9.0:1 c/r, S/R torquers with beehive springs, EPS Edelbrock, Edelbrock 600 cfm carb. The cam i went with was a Comp grind (XR270HR) with .495in .502ex and 218in 224ex @50. 110 L/S, and an intake closing of 61 abdc. Now the cam is nice, but it idles a little to smooth for my taste. The motors in my 76 shortbed GMC, with a saginaw 3 speed, and 3.42 gears, and P27560's roughly 28" tall. I want to change to a better set of heads in the future, but for now i want to maybe go with a little better retro-roller cam if possible. Something that has a little nicer idle to it, that wont kill to much of the bottom end. One cam i was looking at is the Comp 280HR, with .525 in. and ex. and 224 in. and ex. @50, intake closing is 66 abdc, 110 L/S. (Pleas Advise)
|
04-16-2006, 10:42 AM | #2 |
Registered User
Join Date: Mar 2005
Posts: 92
|
Re: A retro-roller cam swap advice in 350sbc
I guess nobody has any idea's.
|
04-16-2006, 10:56 AM | #3 | |
Account Suspended
Join Date: Sep 2005
Location: Monroe, WA
Posts: 3,814
|
Re: A retro-roller cam swap advice in 350sbc
Quote:
|
|
04-16-2006, 12:01 PM | #4 |
Registered User
Join Date: Nov 2005
Location: sterling heights , michigan
Posts: 208
|
Re: A retro-roller cam swap advice in 350sbc
i cant give you advice on a cam but maybe if you also post it in general discussion forum more people will your post ? just an idea.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|