Engine code for 67 c-30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

woodridge · 04-26-2006, 01:01 PM

I have a 67 c-30 that looks to have the original engine. Can someone tell me if CEB121653 would be the right code for this truck.

**John Fabris** · 04-26-2006, 01:08 PM

Where did that number come from?

In front of the passenger side head on the engine block there should be a number (letter prefix and suffix as well). If you get that number, you can find out what engine is and what it went into from the factory.

woodridge · 04-26-2006, 01:30 PM

That # came from the pad on the front of the engine. Thanks

**John Fabris** · 04-26-2006, 03:43 PM

Is there another number? That one looks like a partial vin number.

Checkout www.nastyz28.com as they have a good section for decoding numbers.... I can't find a number starting with CEB (B is not listed) but if it is a CE block that would make it a 305.....

check out the "Number Decoding" link on that page....

woodridge · 04-26-2006, 05:02 PM

I'll check again and see. Thanks

woodridge · 04-26-2006, 09:49 PM

I looked again this afternoon and the CEB121653 is all that is on the front pad. The casting # is 3959532 but I can't see the date code. I looked in my Moretech papers and couldn't find this casting #.

Bob D · 04-26-2006, 11:19 PM

Looks like a 283 cid.

ChevyTough · 04-26-2006, 11:23 PM

CE stands for either Chevrolet Engine or Crate Engine. That means it was a replacement for a motor that went bad under warrenty.

And yeah, 3959532 is a 283. According to www.mortec.com:

3959532 - 283ci - 1964 - Used for some "CE" replacement blocks

woodridge · 04-27-2006, 12:23 PM

That's what I've been able to come up with also. Thanks All.

04-26-2006, 01:01 PM	#1
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Engine code for 67 c-30 I have a 67 c-30 that looks to have the original engine. Can someone tell me if CEB121653 would be the right code for this truck. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet Last edited by woodridge; 04-26-2006 at 09:47 PM.

04-26-2006, 01:08 PM	#2
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Engine code for 67 c-30 Where did that number come from? In front of the passenger side head on the engine block there should be a number (letter prefix and suffix as well). If you get that number, you can find out what engine is and what it went into from the factory. __________________ John Fabris 67 C10 SWB

04-26-2006, 01:30 PM	#3
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Engine code for 67 c-30 That # came from the pad on the front of the engine. Thanks __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

04-26-2006, 03:43 PM	#4
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Engine code for 67 c-30 Is there another number? That one looks like a partial vin number. Checkout www.nastyz28.com as they have a good section for decoding numbers.... I can't find a number starting with CEB (B is not listed) but if it is a CE block that would make it a 305..... check out the "Number Decoding" link on that page.... __________________ John Fabris 67 C10 SWB

04-26-2006, 05:02 PM	#5
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Engine code for 67 c-30 I'll check again and see. Thanks __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

04-26-2006, 09:49 PM	#6
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Engine code for 67 c-30 I looked again this afternoon and the CEB121653 is all that is on the front pad. The casting # is 3959532 but I can't see the date code. I looked in my Moretech papers and couldn't find this casting #. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

04-26-2006, 11:19 PM	#7
Bob D Rolled on Paint Club Join Date: Jan 2006 Location: Windham, CT. Posts: 232	Re: Engine code for 67 c-30 Looks like a 283 cid. __________________ 1970 GMC 1500 swb fleetside SB 355ci. Smog heads Summit 1102 cam Performer intake and carb. Finally in about 1 piece in the yard.

04-26-2006, 11:23 PM	#8
ChevyTough Registered User Join Date: Apr 2006 Location: Kansas Posts: 32	Re: Engine code for 67 c-30 CE stands for either Chevrolet Engine or Crate Engine. That means it was a replacement for a motor that went bad under warrenty. And yeah, 3959532 is a 283. According to www.mortec.com: 3959532 - 283ci - 1964 - Used for some "CE" replacement blocks __________________ 72 Chevy C10 longbed 350/350 86 Chevy K10 short-stepside, daily driver 63 Galaxie 2 door sedan 260/3 speed - basket case 72 Chevy C10 longbed - parts (good box and A/C cab) 70 Chevy C10 longbed - parts (decent box) 66 El Camino 327/Powerglide (extreme rust) 61 Bel Air, no drivetrain, sittin' in the pasture 71 F250, 72 F150, 70 F100 - parts Last edited by ChevyTough; 04-26-2006 at 11:26 PM.

04-27-2006, 12:23 PM	#9
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Engine code for 67 c-30 That's what I've been able to come up with also. Thanks All. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.