Parting.. 68 short stepside (Seattle) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 05-11-2006, 12:33 PM

All or parts..
Cab is in decent shape.. floor supports, cab corners are solid,
Some rust in lower kick panels.. Drivers door is junk.. Pass door solid, Windshield good, Bed sides solid, Rear fenders are decent, 3:73 open rear end, 3spd trans, Frame is bent, engine has been out in the weather for a while with the carb removed.. HEI is gone.. PS bracket is gone..

6 cylinder engine, (Core) Free you pull.
Rear end.. $75.00
Cab.. $175.00
Bed..$150.00
Or complete truck with title.. $300..

No Shipping.. come and pull what you need..

PM, email or call for more info..
Livrat@aol.com
206-406-2719

Blue85 · 05-11-2006, 10:48 PM

How bent is the frame? Might becoming out that way in the near future, would be interested in the whole truck.

Livrat · 05-11-2006, 11:19 PM

Blue85.. it needs both frame horns in front of the suspension crossmember.. I even have them cut off of another truck. I was pondering fixing it.. But I have too many projects..

Blue85 · 05-12-2006, 12:26 AM

Ok, well if I come down to washington i'll buy, my buddy is bidding on a car in washington somewhere, if he wins were comin down there.

72armyswbtruck · 05-12-2006, 03:12 AM

Damn and me with no trailer or a drivable truck... TTT for you anyways.

jay-dawg · 05-12-2006, 04:11 AM

dang...it's the general lee truck! gotta save this one! j/k good luck with the sell.

Jay

Livrat · 05-12-2006, 09:08 AM

Blue85.. Okay..Let me know if it works out..

72armyswbtruck.. Hmmmm.. its sitting on my trailer and I have a truck that will pull it.. a road trip to Idaho sounds fun!!.. But at 8 mpg with my 468cu BB.. Gas would cost more than the truck..

jay-dawg.. Thanks for the good luck..

*Billla* · 05-12-2006, 09:14 PM

Quote:

Originally Posted by 72armyswbtruck

Damn and me with no trailer or a drivable truck... TTT for you anyways.

I'll deliver it to you if I can bring your BBC back - seriously

squeekyM · 05-13-2006, 01:53 AM

Hi,

I am looking for a new steering wheel for my rig. I am hoping to grab the early stock 3spoke wheel found on '67s. Would you be able to snap a picture of the steering wheel. Please PM me if you can part with the wheel. Thanks, take care.

- Jerry

Livrat · 05-13-2006, 02:15 PM

squeekyM.. You probably do not want the steering wheel. it is cracked and bent slightly.

72armyswbtruck · 05-13-2006, 03:36 PM

I might truly be interested in that swap. Let me talk it over with the household6 (wife) and i'll get back to you. PM Sent

oscareltemblo · 05-13-2006, 03:48 PM

does'it have tilt steering wheel

Livrat · 05-14-2006, 12:05 PM

oscareltemblo Sorry no tilt its a 3spd manual

Livrat · 05-15-2006, 06:52 PM

Price drop... $250 for the whole thing??

ZOOMY · 05-15-2006, 11:37 PM

I'll take the drivers side rear fender if the lip is solid. The USPS will ship items up to 70#. Just wrap it in duct tape and take it to the PO...........Thanks...............Zoomy

ZOOMY · 05-16-2006, 04:38 AM

I also need a core support. I s'pose that got crunched along with the fame............Z

Livrat · 05-16-2006, 09:04 AM

Thanks all for the inquiries.. I have a deal pending on the whole truck..

GenIIIShorty · 05-18-2006, 01:37 AM

Any word? I just need the bed!

Livrat · 05-18-2006, 12:50 PM

GenIIIShorty... PM sent

05-11-2006, 12:33 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Parting.. 68 short stepside (Seattle) All or parts.. Cab is in decent shape.. floor supports, cab corners are solid, Some rust in lower kick panels.. Drivers door is junk.. Pass door solid, Windshield good, Bed sides solid, Rear fenders are decent, 3:73 open rear end, 3spd trans, Frame is bent, engine has been out in the weather for a while with the carb removed.. HEI is gone.. PS bracket is gone.. 6 cylinder engine, (Core) Free you pull. Rear end.. $75.00 Cab.. $175.00 Bed..$150.00 Or complete truck with title.. $300.. No Shipping.. come and pull what you need.. PM, email or call for more info.. Livrat@aol.com 206-406-2719 Attached Images

05-11-2006, 10:48 PM	#2
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,170	Re: Parting.. 68 short stepside (Seattle) How bent is the frame? Might becoming out that way in the near future, would be interested in the whole truck. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

05-11-2006, 11:19 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting.. 68 short stepside (Seattle) Blue85.. it needs both frame horns in front of the suspension crossmember.. I even have them cut off of another truck. I was pondering fixing it.. But I have too many projects..

05-12-2006, 12:26 AM	#4
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,170	Re: Parting.. 68 short stepside (Seattle) Ok, well if I come down to washington i'll buy, my buddy is bidding on a car in washington somewhere, if he wins were comin down there. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

05-12-2006, 03:12 AM	#5
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: Parting.. 68 short stepside (Seattle) Damn and me with no trailer or a drivable truck... TTT for you anyways. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

05-12-2006, 04:11 AM	#6
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Re: Parting.. 68 short stepside (Seattle) dang...it's the general lee truck! gotta save this one! j/k good luck with the sell. Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

05-12-2006, 09:08 AM	#7
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting.. 68 short stepside (Seattle) Blue85.. Okay..Let me know if it works out.. 72armyswbtruck.. Hmmmm.. its sitting on my trailer and I have a truck that will pull it.. a road trip to Idaho sounds fun!!.. But at 8 mpg with my 468cu BB.. Gas would cost more than the truck.. jay-dawg.. Thanks for the good luck..

05-13-2006, 01:53 AM	#9
squeekyM Registered User Join Date: Jun 2005 Location: California Posts: 51	Re: Parting.. 68 short stepside (Seattle) Hi, I am looking for a new steering wheel for my rig. I am hoping to grab the early stock 3spoke wheel found on '67s. Would you be able to snap a picture of the steering wheel. Please PM me if you can part with the wheel. Thanks, take care. - Jerry

05-13-2006, 02:15 PM	#10
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting.. 68 short stepside (Seattle) squeekyM.. You probably do not want the steering wheel. it is cracked and bent slightly.

05-13-2006, 03:36 PM	#11
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: Parting.. 68 short stepside (Seattle) I might truly be interested in that swap. Let me talk it over with the household6 (wife) and i'll get back to you. PM Sent __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

05-13-2006, 03:48 PM	#12
oscareltemblo Registered User Join Date: Apr 2006 Location: Allen Park, MI Posts: 280	Re: Parting.. 68 short stepside (Seattle) does'it have tilt steering wheel __________________ My Official build thread http://67-72chevytrucks.com/vboard/s...d.php?t=196844

05-14-2006, 12:05 PM	#13
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting.. 68 short stepside (Seattle) oscareltemblo Sorry no tilt its a 3spd manual

05-15-2006, 06:52 PM	#14
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting.. 68 short stepside (Seattle) price reduction Price drop... $250 for the whole thing??

05-15-2006, 11:37 PM	#15
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: Parting.. 68 short stepside (Seattle) I'll take the drivers side rear fender if the lip is solid. The USPS will ship items up to 70#. Just wrap it in duct tape and take it to the PO...........Thanks...............Zoomy Last edited by ZOOMY; 05-16-2006 at 12:47 AM.

05-16-2006, 04:38 AM	#16
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: Parting.. 68 short stepside (Seattle) I also need a core support. I s'pose that got crunched along with the fame............Z



Register or Log In To remove these advertisements.

05-16-2006, 09:04 AM	#17
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting.. 68 short stepside (Seattle) Thanks all for the inquiries.. I have a deal pending on the whole truck..

05-18-2006, 01:37 AM	#18
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: Parting.. 68 short stepside (Seattle) Any word? I just need the bed! __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

05-18-2006, 12:50 PM	#19
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting.. 68 short stepside (Seattle) GenIIIShorty... PM sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.