![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
What's that funky smell?
Join Date: Mar 2005
Location: Austin, TX
Posts: 610
|
![]()
I just counted parts from at least 11 different trucks on my ride. But it could be more...
Most of it is still the original farm truck. The right fender and doorskin came off a junkyard truck before I got it (A reminder of Grandpa's last drive!) The visors and seatbelts came from a 1968 junkyard truck. A couple of small parts came off of a 1970 junkyard truck. Two of the wheels also came out of a pile at a junkyard. The mirrors, door handles and side reflectors came from a swap. The hubcaps also came from a swap meet. The replacement bed came off a 1968 Anniversary Edition truck from a board member! The battery tray came out of a 1968 GMC from a board member! The washer bottle holder and under dash wiring harness came from a board member! The fuel sender also came from a board member! There is probably more in there, too. ![]()
__________________
Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page Last edited by TruckinDaddy; 05-16-2006 at 08:58 AM. |
![]() |
![]() |
![]() |
#2 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: How many trucks did it take to make yours?
If you want to count every little piece...... probably 50 or so
![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-16-2006 at 09:10 AM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2002
Location: mass
Posts: 1,277
|
Re: How many trucks did it take to make yours?
1 blazer, 1 corvette, 1 suburban and at least 15 other trucks
|
![]() |
![]() |
![]() |
#4 |
It's a catastrophic success.
![]() Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: How many trucks did it take to make yours?
Put this way Johnny Cash wrote a song about mine.LOL
![]() http://www.geocities.com/potatochippers/Onepiece.html |
![]() |
![]() |
![]() |
#5 |
Blank
Join Date: May 2005
Location: Southington, CT
Posts: 221
|
Re: How many trucks did it take to make yours?
6 trucks if you count the big pieces and if your counting the little pieces then more like 50
__________________
![]() 1969 lwb 4/6 drop 17x8-18x10 torque thrust II's 327-420hp 2004R 3.73 posi. 1977 Corvette 350-375hp 4speed, silver show car. 2002 S10 xtreme, work truck 2004.5 VW jetta GLI 1.8T 6speed, weekend warrior. 2013 Audi A3 TDI, the wife's car |
![]() |
![]() |
![]() |
#6 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Re: How many trucks did it take to make yours?
I'm working on 5
![]() 67 Grille/Core support - bought locally 67 Front Fenders - bought locally Stepside bed - bought locally 72 rolling chassis - bought locally My Cab/Doors and related accessories Everything else will be new ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
Re: How many trucks did it take to make yours?
frame, bellhousing, doors, and cowl from a '69 swb
front clip, front and rear suspenions, short fleet bed, and seat from a '72 cab from a '69 doorpanels, headeliner, arms rest, dash pad, guages and wiring from a '71 clutch linkage froma '70 engine from a '86 camaro transmission from a vega plus a bunch of odds and ends that makes 5 trucks and 2 cars. chris.
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. ![]() ![]() 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's |
![]() |
![]() |
![]() |
#8 |
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,685
|
Re: How many trucks did it take to make yours?
Wow, I need to catch up! Just 3 here: The original 68, the donor 71 front suspension, and the donor 72 frame. All the rest are brand new parts right out the catalog. And I mean EVERYTHING!
![]()
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,020
|
Re: How many trucks did it take to make yours?
3 so far...
69 Frame,axles.ect 71 Motor/tranny,cab 69.Bed Last edited by 1969k10stepside; 05-16-2006 at 06:02 PM. |
![]() |
![]() |
![]() |
#10 |
What's that funky smell?
Join Date: Mar 2005
Location: Austin, TX
Posts: 610
|
Re: How many trucks did it take to make yours?
Glad I am in good company here!
__________________
Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
Re: How many trucks did it take to make yours?
How about other MAKES? My truck now has a Dodge front axle, a Chevy rear axle, an International transfer case, and transmission from a Chevy C60. Plus the numerous other little pieces. And the best part? It's nowhere NEAR done...i'm sure I will be responsible for the downfall of a few more before its finished.
__________________
1969 GMC K2500 ![]() 1996 Honda Accord 2007 Kawasaki KLR 650 |
![]() |
![]() |
![]() |
#12 |
Account Suspended
Join Date: Jan 2006
Location: Visalia, California
Posts: 286
|
Re: How many trucks did it take to make yours?
little things here and their off a abondened truck.. was stolen.. owner of property said take wa ya want b4 i torch it and sell the metal as scrap..... looked like a 70-71 chevy 3/4ton dully..... granny trans.
seats outta 94-96 ford taurus. |
![]() |
![]() |
![]() |
#13 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: How many trucks did it take to make yours?
Best I can tell, the 2wd is all OE so that's a 1
![]() "GQ" on the other hand I have no freaking idea ![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#14 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,643
|
Re: How many trucks did it take to make yours?
Dunno what to say here -- aside from replacing water pumps, batteries, brakes, and wheels, mine is pretty much OEM. Oh yeah, Softride 2" front springs, HEI ignition, 4-row radiator, aftermarket radio.... but no other truck parts have been grafted onto it.
![]()
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
|
Re: How many trucks did it take to make yours?
About half a dozen. Front end from a 71 (yay, disc brakes!) One bedside from a 67 (no sidemarker) which was actually converted into a trailer that a buddy had. Been thru a couple sets of doors. Rear coils from some other truck. Tilt column from a mid 70's GM van. Rad overflow bottle from an '82 camaro. Its amazing how Chev/GM parts in general can be so interchangeable! Otherwise its all original 1970 GMC truck.
__________________
1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. |
![]() |
![]() |
![]() |
#16 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How many trucks did it take to make yours?
just looking from the outside....
original cab and doors 69GMC front clip 71/72 hood 72 bed (not the wsame '72) 68 tail gate 2 wheels off one truck 2 wheels off another 2 tires off a huge RV 2 tires off an 92 p/u (ferd) UNder the hood..... wow, oil pan and manifolds off 77 Eldorodo rest of engine off 76 De Ville tranny off a 70-something Pontiac something or another rad out of a 90's van Fan shroud (inline finger protector style) 67 p/u brake booster off a truck on the board (can't even remember who) Christ, i could keep going all night. ![]() |
![]() |
![]() |
![]() |
#17 |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Re: How many trucks did it take to make yours?
A lot!
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Mar 2001
Location: Hernando, MS USA
Posts: 1,152
|
Re: How many trucks did it take to make yours?
At least six:
Frame and suspension from a '69 Cab from a '72 Engine from a '75 Rear axle from Putter's '69 Seat from a '99 Suburban Rear view mirror from a '01 or '02 Suburban (auto dim, compass, temp) Oh wait, one more: Serpentine belt setup from a '94 (I think)
__________________
George Morgan Hernando, MS '69 C-10 swb fleetside '72 GMC swb Stepside |
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: How many trucks did it take to make yours?
It is not mine but "Project Penicillin~ 68 crewcab build up!" has more truck and burb parts that gave their life for this build than I want to admit to. I would get shot if I added up what we have done
![]() Kevin LFD Inc. Last edited by Rokcrln; 05-16-2006 at 08:32 PM. |
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Feb 2001
Location: Ridgecrest. CA, USA
Posts: 1,715
|
Re: How many trucks did it take to make yours?
Here is mine,
Hood off of a 72 Chevy Truck, EL Centro CA Bed from a 69 Chevy longhorn, Ridge Crest CA Steering wheel from a 72 Chevy Van, El Centro CA Right fender from a 68 GMC Truck, San Diego CA Left fender from a 70 GMC Truck, San Diego CA Dash pad out of a 69 4x4 swb Chevy Truck, Ludlow Falls Ohio Passenger Door and Tailgate off of a 71 GMC, El Centro CA Front grill OFF A 69 GMC, Carson NV Tires from a 61 3/4 GMC, San Diego CA Tailight lences from Napa Lots of Interior parts and Body rubber from Ricks Pickup parts Board members sent me the following: Door handles Hub Caps Hood Hinge GMC Horn Caps Winshield wiper assembly's Thanks for all the parts Guys!!! ALOT OF TRUCKS TO SAY THE LEAST. GOOD POST!!!! Respectfully
__________________
Billy ![]() ![]() 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! ![]() ![]() ![]() I'M IN THE MARKET...AS IT WERE! Last edited by longhorn70gmc; 05-16-2006 at 09:15 PM. |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Feb 2004
Location: columbus,ohio
Posts: 201
|
Re: How many trucks did it take to make yours?
probably 6 and nothing is that pretty
__________________
67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts- |
![]() |
![]() |
![]() |
#22 |
Senior Member
Join Date: Nov 2005
Location: northwestern wi
Posts: 2,111
|
Re: How many trucks did it take to make yours?
no way i could even come up with an accurate estimate.it had major componites of at leat 4 before i got it. at least 12 more now for major parts.new fenders and nothing says half the parts borrowed from those other trucks were oraginal to them then add in all the little stuf from hear and there[ junk yards , e-bay , board members, freinds, neighbors and my collection of junk] and probably double that before im done. no one will ever know!!!!!!!
__________________
common sense isn't so common anymore |
![]() |
![]() |
![]() |
#23 |
DON'T TREAD ON ME
![]() Join Date: May 2005
Location: Crosby County, TX
Posts: 989
|
Re: How many trucks did it take to make yours?
In my case it all came off only 5 trucks with a sixth one indirectly invovled.
1. Most of my stuff came off a wrecked '71 that I bought for only $125 sans engine and trany of course. Disk brakes, spindles and rear axle Power brake booster came off the donor truck but I later found out it was from a '75 truck Side Marker Lights Chrome Front Bumper Lap belts for the middle of the seat Rear slide window Instrument bezel 2. Power steering pump and gear box from about a 69 or 70 model GMC 3. '72 Blazer gas tank, fuel inlet and sender 4. Left window reg was acquired from one of the members on the forum. 5. Hood hinges from one of the members on the forum Everything else came from aftermarket suppliers
__________________
Old Yeller |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: How many trucks did it take to make yours?
Everything on the truck has been there except:
jr west coast mirrors, '67 C10 rear bumper, came from a '84 GMC crewcab, bolted right in recently painted hood, came from 72 C10 recently painted cab is going on sometime, 70 C10 gas tank, came from 70 GMC 1500 brake booster, 72 GMC 3500 seat, 70 K20 Burb that I'm getting soon, so it's going back in there! fan shroud, also from K20 Burb dash pad, also from K20 Burb wheels, two 16" GM 8 lugs with old tires in front, two 16.5x9.75 GM wheels also from the junkyard with new 33-12.50's BFG A/T's in back cab lights and wiring, from a '79 Chevy crewcab dually
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 05-16-2006 at 10:33 PM. |
![]() |
![]() |
![]() |
#25 |
Senior Member
Join Date: Apr 2002
Location: Help! I'm in an office park with its own network of freeways!
Posts: 470
|
Re: How many trucks did it take to make yours?
Let's see:
Engine--'78 G30 (that's what the suffix says anyway; I have no idea as this engine was already in the truck when I bought it.) Transmission--'64 C10 Rear End Pig 1 (when I bought the truck, 4.57)--'64 C20 Rear End Pig 2 (current, 4.10)--'69 C20 Trailing arms--no idea, I bought 'em off a board member from KS Bed--no idea, it's not a '67 I do know that for sure Tailgate--'71 C10 Steering box--no idea, bought it off Ironhorse Window regulators--no idea, bought 'em off FrenchBlue72 Helper springs & sway bar--no idea, bought 'em off roj2323 Wiper switches--no idea, bought 'em off 67sss Steering wheel--no idea, bought 'em off a board member Instrument panel--'72 C50 So that's 13 trucks.
__________________
'67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. *fingers crossed* |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|