Hey GMC guys, have a question. Plz look at this pic..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 06-12-2006, 11:13 AM

Since I don't know anything about the GMC grills, can you tell me if the headlight bracket is bent on the inside light, or if that is it's correct shape?

Livrat · 06-12-2006, 11:51 AM

It looks bent to me

Mordachai · 06-12-2006, 01:00 PM

sorry, it's bent.

glock35ipsc · 06-12-2006, 01:01 PM

Cool, thanks guys! Time to break out the Porta-Power! Thanks for the pic Mordachai.

**special-K** · 06-12-2006, 10:09 PM

Best way to tell is look at the other side.They should be the same.

Rokcrln · 06-12-2006, 10:16 PM

Quote:

Originally Posted by special-K

Best way to tell is look at the other side.They should be the same.

glock35ipsc · 06-12-2006, 10:18 PM

Quote:

Originally Posted by special-K

Best way to tell is look at the other side.They should be the same.

They are the same........ they are both bent! The right one is bent more that the left

longhorn70gmc · 06-13-2006, 01:47 AM

Even though you have found the answer, it does Look bent to me as well. Goodluck on the fix!
Respectfully

**special-K** · 06-13-2006, 05:58 AM

Don`t worry,Glock,they`re nowhere near as bent as I am.(both sides,too)

glock35ipsc · 06-13-2006, 08:00 AM

Quote:

Originally Posted by special-K

Don`t worry,Glock,they`re nowhere near as bent as I am.(both sides,too)

06-12-2006, 11:13 AM	#1
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Hey GMC guys, have a question. Plz look at this pic..... Since I don't know anything about the GMC grills, can you tell me if the headlight bracket is bent on the inside light, or if that is it's correct shape? Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 06-12-2006 at 11:14 AM.

06-12-2006, 11:51 AM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Hey GMC guys, have a question. Plz look at this pic..... It looks bent to me

06-12-2006, 01:00 PM	#3
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: Hey GMC guys, have a question. Plz look at this pic..... sorry, it's bent. __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

06-12-2006, 01:01 PM	#4
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Hey GMC guys, have a question. Plz look at this pic..... Cool, thanks guys! Time to break out the Porta-Power! Thanks for the pic Mordachai. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 06-12-2006 at 01:03 PM.

06-12-2006, 10:09 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Hey GMC guys, have a question. Plz look at this pic..... Best way to tell is look at the other side.They should be the same. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-13-2006, 01:47 AM	#8
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Hey GMC guys, have a question. Plz look at this pic..... Even though you have found the answer, it does Look bent to me as well. Goodluck on the fix! Respectfully __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

06-13-2006, 05:58 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Hey GMC guys, have a question. Plz look at this pic..... Don`t worry,Glock,they`re nowhere near as bent as I am.(both sides,too) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.