Tennman Fuel door questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyDude · 07-06-2006, 09:54 AM

So I think I'm going to tackle my fuel door the Tennman Marker door way...except I have a fleetside. Going to try to do it without cutting the flawless steel floor this truck has. Question is, from what I read, the parts I need are a 97' S-10 round gas door and hinge, the aluminum filler tube, and the black plastic drip/catch piece. I did a nationwide salvage yard internet search and and Anderson Salvage yard says they have all those pieces for me. They want $85 and I would assume shipping is extra. Is this a good price for these 3 things?

If I'm missing something please fill me in.

Alex

67ChevyRedneck · 07-06-2006, 10:11 AM

That seems crazy high! I paid $30 for a complete silverado fuel filler door (88-98 style) which I think is the same as the mid-late 90's S-10's? I got everything including the bed sheet metal around it and the filler neck stuff.

Might want to try a WTB on the parts board?

glock35ipsc · 07-06-2006, 10:14 AM

Dude, I have an extra S-10 door with a hinge. PM me your address and I will send it to you. I am going a different route, so I won't be needing it.

And it is red too!!

ChevyDude · 07-06-2006, 10:19 AM

Sweet...I'll come up and pick it up if that's OK, no shipping!

I thought that was high for the 3 things!!!

glock35ipsc · 07-06-2006, 10:23 AM

Works for me either way. I can bring it to work, or if you want to come out to the house and snoop around the shop, that works too!

ChevyDude · 07-06-2006, 10:36 AM

Love to come look at the 68'. This weekend I'm heading to Craig, CO pre archery trip cabin readying...but Sat. the 15th would work...if it will for you...sometime, 10:30 am ish???

glock35ipsc · 07-06-2006, 10:38 AM

Works for me. If you have a fax, I have a cool map already made up on how to get to my place.

ChevyDude · 07-06-2006, 11:46 AM

Fax: 303 657-0717 Fax answers on the 6th ring. I just set it up so if you can give it a try.

Alex

glock35ipsc · 07-06-2006, 11:52 AM

Map is on it's way. Yell if you have any questions on it.....

ChevyDude · 07-06-2006, 11:55 AM

Yup...Perfect...see you on the 15th 10:30 am ish!!! Hey Bob...how much $ do you want for the gas door? Or do you need any vent window rebuild felt...I have lots of parts sitting around that I'm not going to use.

BigMike · 07-06-2006, 12:02 PM

I was going to do the same marker fuel door mod. Problem is, California has these 2.5 in (or so) vapor vacuums built around the actual metal fuel nozzle...that would not do well to the paint around the marker, so I scratched the idea. I had already bought the S10 round door as well, oh well it was only $8. I think I will design something into the bed, like someone had done with a late model square truck fuel door.

Mike

glock35ipsc · 07-06-2006, 12:03 PM

Don't need any $$ for it. Believe it or not, I have most all the parts I need except for a short list of stuff. But if you still have your old front bumper, I just need to borrow one to get an idea if that's what I want to use or not.

ChevyDude · 07-06-2006, 12:07 PM

Old front bumper got pitched...was all scratched. I could remove the new one and bring it???

glock35ipsc · 07-06-2006, 12:12 PM

Naw, don't need to do that. You are suppose to be installing parts, not removing them! I'll plasma cut some holes in my old one and hang it on there.

justplainjoe · 07-06-2006, 01:58 PM

Here are thehttp://i63.photobucket.com/albums/h154/72gmc/IMG_0935_4_1_1.jpg ones I dhttp://i63.photobucket.com/albums/h154/72gmc/IMG_0932_1_1_1.jpgid on my GMC, also S10 doors

justplainjoe · 07-06-2006, 02:02 PM

Sorry I'll try again http://i63.photobucket.com/albums/h1...0932_1_1_1.jpg

subtle71 · 07-06-2006, 03:28 PM

You also might want to hit up or pm Yank. He has a short fleet that has the gas filler behind the left rear taillight, rather than the side marker. Just a suggestion!

Dean

07-06-2006, 09:54 AM	#1
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Tennman Fuel door questions So I think I'm going to tackle my fuel door the Tennman Marker door way...except I have a fleetside. Going to try to do it without cutting the flawless steel floor this truck has. Question is, from what I read, the parts I need are a 97' S-10 round gas door and hinge, the aluminum filler tube, and the black plastic drip/catch piece. I did a nationwide salvage yard internet search and and Anderson Salvage yard says they have all those pieces for me. They want $85 and I would assume shipping is extra. Is this a good price for these 3 things? If I'm missing something please fill me in. Alex Last edited by ChevyDude; 07-06-2006 at 09:54 AM.

07-06-2006, 10:11 AM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Tennman Fuel door questions That seems crazy high! I paid $30 for a complete silverado fuel filler door (88-98 style) which I think is the same as the mid-late 90's S-10's? I got everything including the bed sheet metal around it and the filler neck stuff. Might want to try a WTB on the parts board? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-06-2006, 10:14 AM	#3
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Tennman Fuel door questions Dude, I have an extra S-10 door with a hinge. PM me your address and I will send it to you. I am going a different route, so I won't be needing it. And it is red too!! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 07-06-2006 at 10:15 AM.

07-06-2006, 10:19 AM	#4
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Tennman Fuel door questions Sweet...I'll come up and pick it up if that's OK, no shipping! I thought that was high for the 3 things!!! Last edited by ChevyDude; 07-06-2006 at 10:22 AM.

07-06-2006, 10:23 AM	#5
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Tennman Fuel door questions Works for me either way. I can bring it to work, or if you want to come out to the house and snoop around the shop, that works too! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-06-2006, 10:36 AM	#6
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Tennman Fuel door questions Love to come look at the 68'. This weekend I'm heading to Craig, CO pre archery trip cabin readying...but Sat. the 15th would work...if it will for you...sometime, 10:30 am ish???

07-06-2006, 10:38 AM	#7
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Tennman Fuel door questions Works for me. If you have a fax, I have a cool map already made up on how to get to my place. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-06-2006, 11:46 AM	#8
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Tennman Fuel door questions Fax: 303 657-0717 Fax answers on the 6th ring. I just set it up so if you can give it a try. Alex Last edited by ChevyDude; 07-06-2006 at 11:57 AM.

07-06-2006, 11:52 AM	#9
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Tennman Fuel door questions Map is on it's way. Yell if you have any questions on it..... __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-06-2006, 11:55 AM	#10
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Tennman Fuel door questions Yup...Perfect...see you on the 15th 10:30 am ish!!! Hey Bob...how much $ do you want for the gas door? Or do you need any vent window rebuild felt...I have lots of parts sitting around that I'm not going to use. Last edited by ChevyDude; 07-06-2006 at 11:56 AM.

07-06-2006, 12:02 PM	#11
BigMike Registered User Join Date: Sep 2004 Location: Rancho Santa Margarita - SoCal Posts: 1,432	Re: Tennman Fuel door questions I was going to do the same marker fuel door mod. Problem is, California has these 2.5 in (or so) vapor vacuums built around the actual metal fuel nozzle...that would not do well to the paint around the marker, so I scratched the idea. I had already bought the S10 round door as well, oh well it was only $8. I think I will design something into the bed, like someone had done with a late model square truck fuel door. Mike __________________ Mike My 69 SWB Project Father/Son 72 Nova Project My Airbrushed RC Car Bodies

07-06-2006, 12:03 PM	#12
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Tennman Fuel door questions Don't need any $$ for it. Believe it or not, I have most all the parts I need except for a short list of stuff. But if you still have your old front bumper, I just need to borrow one to get an idea if that's what I want to use or not. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-06-2006, 12:07 PM	#13
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Tennman Fuel door questions Old front bumper got pitched...was all scratched. I could remove the new one and bring it???

07-06-2006, 12:12 PM	#14
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Tennman Fuel door questions Naw, don't need to do that. You are suppose to be installing parts, not removing them! I'll plasma cut some holes in my old one and hang it on there. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-06-2006, 01:58 PM	#15
justplainjoe Registered User Join Date: Jul 2003 Location: Gilbert, AZ Posts: 70	Re: Tennman Fuel door questions Here are thehttp://i63.photobucket.com/albums/h154/72gmc/IMG_0935_4_1_1.jpg ones I dhttp://i63.photobucket.com/albums/h154/72gmc/IMG_0932_1_1_1.jpgid on my GMC, also S10 doors __________________ 03 Tahoe LT 4x4 04 Corvette 99 Cadillac SLS 72 GMC 2500 04 Jeep Rubicon



Register or Log In To remove these advertisements.

07-06-2006, 02:02 PM	#16
justplainjoe Registered User Join Date: Jul 2003 Location: Gilbert, AZ Posts: 70	Re: Tennman Fuel door questions Sorry I'll try again http://i63.photobucket.com/albums/h1...0932_1_1_1.jpg __________________ 03 Tahoe LT 4x4 04 Corvette 99 Cadillac SLS 72 GMC 2500 04 Jeep Rubicon

07-06-2006, 03:28 PM	#17
subtle71 Granddad's Ol' Truck Join Date: Jan 2005 Location: MS Posts: 588	Re: Tennman Fuel door questions You also might want to hit up or pm Yank. He has a short fleet that has the gas filler behind the left rear taillight, rather than the side marker. Just a suggestion! Dean __________________ *1971 Chevrolet Custom 10 short step-side* *2005 GMC Sierra SLT 2500HD crew cab 2wd* [I]1971 Chevrolet Custom 10 Deluxe lwb fleet-side

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.