58 GMC Project - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CAL 58 GMC · 09-26-2006, 10:42 AM

Thanks watahyaknow, but I already bought the transmission and I am also trying to keep everything new or rebuilt on the truck.

Kabwe · 09-26-2006, 02:51 PM

Looking good

Project SIKty-5 · 09-26-2006, 07:39 PM

This is an extremely beautiful truck, you can tell it's built w/attention to detail...not to mention some killer body mods. Following along with your build gives me even more drive to work on mine. Nothing better than seeing a classic drive down the road. G'luck with the completion and once again, amazing truck!! Can't wait to see it altogether

CAL 58 GMC · 09-26-2006, 11:13 PM

Quote:

Originally Posted by Kabwe

Looking good

Thanks Buddy!

CAL 58 GMC · 09-26-2006, 11:16 PM

Quote:

Originally Posted by Project SIKty-5

This is an extremely beautiful truck, you can tell it's built w/attention to detail...not to mention some killer body mods. Following along with your build gives me even more drive to work on mine. Nothing better than seeing a classic drive down the road. G'luck with the completion and once again, amazing truck!! Can't wait to see it altogether

Thanks Project SIKty-5! I noticed your from Fresno. Keep a eye out for my truck at the local show when it's done and come up and say hi.

Project SIKty-5 · 09-27-2006, 11:08 AM

I actually live 20 mins south of Fresno...but most people don't know where that is, so I say Fresno. I work in Fresno, though...near the airport. Who did the bodywork for you? I'm doing some of the bodywork on my truck, but I was trying to find a place that I could take it and get some help with the remaining bodywork.

By the way, my name's Chuck.....and I will look for you at local shows, I'm not sure when the next show is, but I do know of a GoodGuys show in Pleasanton in Nov. It's a huge show and real good turn out, and the fairgrounds are beautiful...a show you should consider.

CAL 58 GMC · 09-27-2006, 11:45 AM

Quote:

Originally Posted by Project SIKty-5

I actually live 20 mins south of Fresno...but most people don't know where that is, so I say Fresno. I work in Fresno, though...near the airport. Who did the bodywork for you? I'm doing some of the bodywork on my truck, but I was trying to find a place that I could take it and get some help with the remaining bodywork.

By the way, my name's Chuck.....and I will look for you at local shows, I'm not sure when the next show is, but I do know of a GoodGuys show in Pleasanton in Nov. It's a huge show and real good turn out, and the fairgrounds are beautiful...a show you should consider.

Hey Chuck,

The body and paint was done at Dave's Custom Paint. He's in Clovis on Barstow just east of Clovis ave. He's not cheep, but he does really nice work. I know about the Goodguys show in Pleasanton. I hoping my truck will be done by then, but I'm not sure. Do you ever go to Caluches (the old Bob's Bigboy show)? What year of truck or you working on?

Project SIKty-5 · 09-27-2006, 05:13 PM

Is that the one on blackstone, between bullard and barstow? If so I haven't been out to that in a couple years. Every once and awhile I'd see some classics at Fat Jack's....but that's been awhile too.

I'm building a 1965 C-10 big window 2wd...it was a long bed, but I've cut it down to be 6" shorter than a short bed. Chopping the top about 2", built 2x4 frame rails for it with airbags and laying it over 22s....lot of plans, but it takes awhile.

Look forward to seeing more progress on your truck....ya, the name alone sounds expensive, but nowadays everyone's expensive. Which is why I'm tyring to do as much as I can myself. For the knowledge and to save $$

CAL 58 GMC · 09-28-2006, 06:13 PM

Bob's Bigboy was there, Caluchis is just north of Barstow on Blackstone. You truck sounds interesting. Will you be starting a project thread? I sure would like to see some pics!

CAL 58 GMC · 09-30-2006, 08:49 PM

Okay, I was going to take the chassis to the body shop today, but I had to go into work today because two guys called in sick. So that shot my plans. I'm going to take it in Monday morning to get the cab on. I did get the new TCI transmission install along with a new B&M 2000 stall Hole Shot torque converter and a Derale heat sink trans cooler.

dwcsr · 09-30-2006, 10:24 PM

looking good. I can't wait for the cab to get put on. get hopping we've been waiting long enough. I guess you have to.

skanave · 10-01-2006, 06:22 PM

hot dang man!

that thing is pretty, cant wait to get a ride in that awesome looking beast!

CAL 58 GMC · 10-02-2006, 11:08 AM

Thanks Man! The chassis going this morning for the cab. I should have it back by Saturday.

texascowboy593 · 10-02-2006, 11:32 AM

That TCI looks at home in that pic. Good luck on the frame/cab reunion!

Jebb1978 · 10-02-2006, 12:12 PM

Nice job Cali, very clean looking.

CAL 58 GMC · 10-02-2006, 09:05 PM

Quote:

Originally Posted by Jebb1978

Nice job Cali, very clean looking.

Thanks Buddy! Where have you been? I haven’t heard from you in a wail. Everything okay?

Quote:

Originally Posted by texascowboy593

That TCI looks at home in that pic. Good luck on the frame/cab reunion!

Thanks Texascowboy! Here's the picture I took after the cab was put on.

dwcsr · 10-02-2006, 10:48 PM

WOW WOW WOW. That looks reallly good.

pgf545 · 10-02-2006, 11:00 PM

WOW Cal you have a beauty there. That is going to be stunning going down the road.

Bernie

Tri5Nerd · 10-03-2006, 12:46 AM

That's one sexy truck!

Now that's a show truck? What brand and type of clear did they use?

watahyahknow · 10-03-2006, 04:16 AM

can hardly wait to see it together ....... that colour is awesome it realy is .

dwcsr · 10-03-2006, 09:43 AM

Cal,

Do you have any close ups of the radiator and AC setup. Is it a stock Radiator or aftermarket. I need that setup for mine.

Jebb1978 · 10-03-2006, 11:58 AM

I feel like I have been waiting my whole life to see these pics! It was worth the wait!!! It is absolutly Stunning Cal!

Quote:

Originally Posted by CAL 58 GMC

Thanks Buddy! Where have you been? I haven’t heard from you in a wail. Everything okay?

All is well, just started the move and I am super busy! We moved the trucks over there on Sunday, pics coming as soon as I get a new battery in the camera to upload. It was tons of fun getting it onto the trailor!!! I wish you luck when you go to trailor yours home my friend (yours is even lower). Thanks for your consern old Friend!

Kabwe · 10-03-2006, 12:08 PM

Cal 58,

Man that looks good, when I grow up I'm gonna be just like you.lol

CAL 58 GMC · 10-04-2006, 01:01 AM

Quote:

Originally Posted by dwcsr

WOW WOW WOW. That looks reallly good.

Thanks dwcsr! I'm really getting excited about getting it back!

Quote:

Originally Posted by pgf545

WOW Cal you have a beauty there. That is going to be stunning going down the road.
Bernie

Thanks Bernie! I hope it won't be that much longer before I can drive her down the road!

Quote:

Originally Posted by Tri5Nerd

That's one sexy truck!

Now that's a show truck? What brand and type of clear did they use?

Thanks Tri5nerd! The clear is PPG.

Quote:

Originally Posted by watahyahknow

can hardly wait to see it together ....... that colour is awesome it realy is .

Me too!!! And thanks!

Quote:

Originally Posted by dwcsr

Cal,
Do you have any close ups of the radiator and AC setup. Is it a stock Radiator or aftermarket. I need that setup for mine.

The radiator is stock and the AC unit is Old Air Products.

Quote:

Originally Posted by Jebb1978

I feel like I have been waiting my whole life to see these pics! It was worth the wait!!! It is absolutly Stunning Cal!

All is well, just started the move and I am super busy! We moved the trucks over there on Sunday, pics coming as soon as I get a new battery in the camera to upload. It was tons of fun getting it onto the trailor!!! I wish you luck when you go to trailor yours home my friend (yours is even lower). Thanks for your consern old Friend!

Thanks Jebb! I'm sure glade to hear all is well!

Quote:

Originally Posted by Kabwe

Cal 58,

Man that looks good, when I grow up I'm gonna be just like you.lol

Thanks Kabwe! By the way, how is your truck "growing up"?

PBFAB.COM · 10-04-2006, 01:29 AM

Looks like it's about time to change your avatar pic! Truck's coming along NICELY! The color looks amazing!

09-26-2006, 10:42 AM	#401
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 58 GMC Project Thanks watahyaknow, but I already bought the transmission and I am also trying to keep everything new or rebuilt on the truck. __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

09-26-2006, 02:51 PM	#402
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: 58 GMC Project Looking good

09-26-2006, 07:39 PM	#403
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: 58 GMC Project This is an extremely beautiful truck, you can tell it's built w/attention to detail...not to mention some killer body mods. Following along with your build gives me even more drive to work on mine. Nothing better than seeing a classic drive down the road. G'luck with the completion and once again, amazing truck!! Can't wait to see it altogether

09-27-2006, 11:08 AM	#406
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: 58 GMC Project I actually live 20 mins south of Fresno...but most people don't know where that is, so I say Fresno. I work in Fresno, though...near the airport. Who did the bodywork for you? I'm doing some of the bodywork on my truck, but I was trying to find a place that I could take it and get some help with the remaining bodywork. By the way, my name's Chuck.....and I will look for you at local shows, I'm not sure when the next show is, but I do know of a GoodGuys show in Pleasanton in Nov. It's a huge show and real good turn out, and the fairgrounds are beautiful...a show you should consider.

09-27-2006, 05:13 PM	#408
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: 58 GMC Project Is that the one on blackstone, between bullard and barstow? If so I haven't been out to that in a couple years. Every once and awhile I'd see some classics at Fat Jack's....but that's been awhile too. I'm building a 1965 C-10 big window 2wd...it was a long bed, but I've cut it down to be 6" shorter than a short bed. Chopping the top about 2", built 2x4 frame rails for it with airbags and laying it over 22s....lot of plans, but it takes awhile. Look forward to seeing more progress on your truck....ya, the name alone sounds expensive, but nowadays everyone's expensive. Which is why I'm tyring to do as much as I can myself. For the knowledge and to save $$

09-28-2006, 06:13 PM	#409
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 58 GMC Project Bob's Bigboy was there, Caluchis is just north of Barstow on Blackstone. You truck sounds interesting. Will you be starting a project thread? I sure would like to see some pics! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4 Last edited by CAL 58 GMC; 09-28-2006 at 06:13 PM.

09-30-2006, 08:49 PM	#410
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 58 GMC Project Okay, I was going to take the chassis to the body shop today, but I had to go into work today because two guys called in sick. So that shot my plans. I'm going to take it in Monday morning to get the cab on. I did get the new TCI transmission install along with a new B&M 2000 stall Hole Shot torque converter and a Derale heat sink trans cooler. Attached Images __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

09-30-2006, 10:24 PM	#411
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 GMC Project looking good. I can't wait for the cab to get put on. get hopping we've been waiting long enough. I guess you have to.

10-01-2006, 06:22 PM	#412
skanave Registered User Join Date: May 2006 Location: Clovis, CA Posts: 80	Re: 58 GMC Project hot dang man! that thing is pretty, cant wait to get a ride in that awesome looking beast!

10-02-2006, 11:08 AM	#413
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 58 GMC Project Thanks Man! The chassis going this morning for the cab. I should have it back by Saturday. __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

10-02-2006, 11:32 AM	#414
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: 58 GMC Project That TCI looks at home in that pic. Good luck on the frame/cab reunion! __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver) Last edited by texascowboy593; 10-02-2006 at 11:33 AM.

10-02-2006, 12:12 PM	#415
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: 58 GMC Project Nice job Cali, very clean looking. __________________ 1959 GMC project

10-02-2006, 10:48 PM	#417
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 GMC Project WOW WOW WOW. That looks reallly good.

10-02-2006, 11:00 PM	#418
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: 58 GMC Project WOW Cal you have a beauty there. That is going to be stunning going down the road. Bernie

10-03-2006, 12:46 AM	#419
Tri5Nerd Tripple Five Fanatic Join Date: Sep 2006 Location: USA Posts: 658	Re: 58 GMC Project That's one sexy truck! Now that's a show truck? What brand and type of clear did they use?



Register or Log In To remove these advertisements.

10-03-2006, 04:16 AM	#420
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 58 GMC Project can hardly wait to see it together ....... that colour is awesome it realy is . __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-03-2006, 09:43 AM	#421
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 GMC Project Cal, Do you have any close ups of the radiator and AC setup. Is it a stock Radiator or aftermarket. I need that setup for mine.

10-03-2006, 12:08 PM	#423
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: 58 GMC Project Cal 58, Man that looks good, when I grow up I'm gonna be just like you.lol

10-04-2006, 01:29 AM	#425
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 58 GMC Project Looks like it's about time to change your avatar pic! Truck's coming along NICELY! The color looks amazing! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.