Frt windshield stainless trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

409biscayne · 11-24-2006, 04:45 PM

I can't remember , is the shallow frt stainless the early or late style . I'm installing the frt windshield and the stainless is from some other truck ,
not sure what year. What front seal do i need to use 67 - 70 or 71 / 72 ?
Hope that makes sense , tks ..................................... Doug

Solver · 11-24-2006, 05:42 PM

Shallow stainless is 71-72
deep groove is 70 and older

409biscayne · 11-25-2006, 03:56 AM

Whatta ya know , it is right. Thanks .
Much appreciated ....................................... 409

409biscayne · 11-25-2006, 02:43 PM

Oh cr&* . Does the back stainless follow this rule ? Mine has the deep rib on the back glass , is this 67 - 70 ? I never kow what truck the trim comes from , lol .
Thanks again .............................. Doug

409biscayne · 11-28-2006, 12:40 PM

ttt . Need help .

**John Fabris** · 11-28-2006, 02:29 PM

67 did not have trim on the back small window, do not know if this is true for the 67 large back window. I do think that the trim for 68-72 back window is the same...

Note, I did take a large rear window gasket and trim and cut it down to fit in my small window. Looks Sweet!!!

Solver · 11-28-2006, 07:10 PM

All rear window chrome is deep groove

409biscayne · 11-28-2006, 07:26 PM

Quote:

Originally Posted by Solver

All rear window chrome is deep groove

Thanks dude .

69_C10_project · 01-23-2015, 09:38 AM

Who sells the side moldings like those. I'm looking for some simple and thin stainless moldings for my truck. Thanks

paujones1 · 08-06-2018, 08:11 PM

Where is a good place to get OEM 69-70 front windshield trim?

I have a 70 CST Blazer. The installer has tried 2x to install using the LMC (cheap gasket) and a $75 Precision gasket I supplied. Each time, he is saying that the aftermarket windshield with the gasket and aftermarket trim just doesn't work right. 2 hours 2 different times.

He wanted me to go with no trim and I said no. He said he needed to take the truck to his shop (next door to my painter) so no biggie... but he said it's going to cost $300 - $500 for him to make the parts I supplied work for this install. He said if I can find OEM trim it will be easier and faster.

Thanks, Paul

**LockDoc** · 08-06-2018, 09:21 PM

Quote:

Originally Posted by paujones1

Where is a good place to get OEM 69-70 front windshield trim?

I have a 70 CST Blazer. The installer has tried 2x to install using the LMC (cheap gasket) and a $75 Precision gasket I supplied. Each time, he is saying that the aftermarket windshield with the gasket and aftermarket trim just doesn't work right. 2 hours 2 different times.

He wanted me to go with no trim and I said no. He said he needed to take the truck to his shop (next door to my painter) so no biggie... but he said it's going to cost $300 - $500 for him to make the parts I supplied work for this install. He said if I can find OEM trim it will be easier and faster.

Thanks, Paul

The aftermarket trim is the problem. Use original trim and the Precision gasket and it will be an easy install. You have to be a Premium member to post a "Want To Buy". If you click on the words "Subscribe" in the menu bar above it will explain the different subscription options. If you choose to become a "Premium" member you can post a "WTB" on the parts for sale board.

LockDoc

11-24-2006, 04:45 PM	#1
409biscayne Senior Member Join Date: Nov 2005 Location: Spokane , Wash. Posts: 790	Frt windshield stainless trim I can't remember , is the shallow frt stainless the early or late style . I'm installing the frt windshield and the stainless is from some other truck , not sure what year. What front seal do i need to use 67 - 70 or 71 / 72 ? Hope that makes sense , tks ..................................... Doug __________________ Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD)

11-24-2006, 05:42 PM	#2
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: Frt windshield stainless trim Shallow stainless is 71-72 deep groove is 70 and older __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

11-25-2006, 03:56 AM	#3
409biscayne Senior Member Join Date: Nov 2005 Location: Spokane , Wash. Posts: 790	Re: Frt windshield stainless trim Whatta ya know , it is right. Thanks . Much appreciated ....................................... 409 __________________ Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD)

11-25-2006, 02:43 PM	#4
409biscayne Senior Member Join Date: Nov 2005 Location: Spokane , Wash. Posts: 790	Re: Frt windshield stainless trim Oh cr&* . Does the back stainless follow this rule ? Mine has the deep rib on the back glass , is this 67 - 70 ? I never kow what truck the trim comes from , lol . Thanks again .............................. Doug __________________ Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD)

11-28-2006, 12:40 PM	#5
409biscayne Senior Member Join Date: Nov 2005 Location: Spokane , Wash. Posts: 790	Re: Frt windshield stainless trim ttt . Need help . __________________ Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD)

11-28-2006, 02:29 PM	#6
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Frt windshield stainless trim 67 did not have trim on the back small window, do not know if this is true for the 67 large back window. I do think that the trim for 68-72 back window is the same... Note, I did take a large rear window gasket and trim and cut it down to fit in my small window. Looks Sweet!!! __________________ John Fabris 67 C10 SWB Last edited by John Fabris; 11-28-2006 at 02:41 PM.

11-28-2006, 07:10 PM	#7
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: Frt windshield stainless trim All rear window chrome is deep groove __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

01-23-2015, 09:38 AM	#9
69_C10_project Registered User Join Date: Mar 2013 Location: El Paso, TX Posts: 6	Re: Frt windshield stainless trim Who sells the side moldings like those. I'm looking for some simple and thin stainless moldings for my truck. Thanks

08-06-2018, 08:11 PM	#10
paujones1 Registered User Join Date: Jan 2014 Location: Dublin, CA Posts: 27	Re: Frt windshield stainless trim Where is a good place to get OEM 69-70 front windshield trim? I have a 70 CST Blazer. The installer has tried 2x to install using the LMC (cheap gasket) and a $75 Precision gasket I supplied. Each time, he is saying that the aftermarket windshield with the gasket and aftermarket trim just doesn't work right. 2 hours 2 different times. He wanted me to go with no trim and I said no. He said he needed to take the truck to his shop (next door to my painter) so no biggie... but he said it's going to cost $300 - $500 for him to make the parts I supplied work for this install. He said if I can find OEM trim it will be easier and faster. Thanks, Paul Last edited by LockDoc; 08-06-2018 at 09:23 PM. Reason: Soft edit to remove WTB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.