1969 C10 / Buy the whole garage! $2500

[1BadSS]

Thats right, buy everything in my garage for $2500.

OR BUY IT AS a ROLLER FOR $900 MINUS 355, 4speed, WHEELS & TIRES and GAUGES!

(WILL SUBSTITUTE A 307 and a 3SPEED WITH FACTORY WHEELS!)

Includes the following:

Nearly New Craftsman Toolkit ($250 new)
Engine Crane Never Used($275 new)
Engine Stand Used($50 new)
350 4bolt shortblock(Paid $300)
All of the parts to put the 350 back together into a whole motor minus carb

Factory wheels & tires off of my 69 C10


1969 C10
True 'Custom' Package truck
V8 / 3speed manual.
CLEAR KS ANTIQUE TITLE, CURRENTLY REGISTERED.

Whats done to the Truck:

600CFM Edelbrock Carb
Pro-products Hurricane Intake
327-350hp cam
Ported 882 Heads
Chrome valvecovers, push in K&N breathers
14x5" K&N air filter element
14" Chrome aircleaner housing


Autometer / Autogauge 3 gauge package, never opened / installed
Brand new Wheel Vintiques Wheels / Tires, never seen street time.
($950 total invested 0 MILES!)
15x6 and 15x8 wheels with 275/60/15 BFG Radial T/A's and 225/60/15 Radial T/A's.
Brand new Stainless trim rings, brand new chrome centercaps.

Brand new dash bezel, new misc interior parts, new dome lamp lense, lots of new interior parts.

I'm about $4700 deep into this 'package' so far.

Pictures:

[john@thepier]

Better pictures may help with the sale. Good luck

[JAKES 68GMC]

Droooool. If you were closer, we might be doing some talking. Is that 350 sitting on the floor by the enigne crane a boat engine??

[1BadSS]

Originally Posted by JAKES 68GMC

Droooool. If you were closer, we might be doing some talking. Is that 350 sitting on the floor by the enigne crane a boat engine??

Sure is, it's an 010 casting motor, that has no front pad stampings, which means it can be the '#'s matching' motor for any originally 350 equipped vehicle.

[locab36]

Long or short bed? What kind of shape is the cab in e.g. floors supports? Running and driveable @ the current time? Are you renting space to keep it in? if so how much is rent? I hauled a 82 back from Whitchataw couple years ago.

John

[1BadSS]

Originally Posted by locab36

Long or short bed? What kind of shape is the cab in e.g. floors supports? Running and driveable @ the current time? Are you renting space to keep it in? if so how much is rent? I hauled a 82 back from Whitchataw couple years ago.

John

The truck is running, I need to toss some more timing in it. I have to bleed the front brakes, the whole brake system is new except the rear pads which are barely worn. I'm paying $170/mo to store it, because my garage at home is full with my sunfire and my 65.

I'm about 3 hours north east of wichita.

The truck is a long bed. The floor supports are honestly iffy, the floor pans are in pretty darn good shape. Only some minor seperation from the inner rocker boxes.

[1BadSS]

Originally Posted by 1BadSS

The truck is running, I need to toss some more timing in it. I have to bleed the front brakes, the whole brake system is new except the rear pads which are barely worn. I'm paying $170/mo to store it, because my garage at home is full with my sunfire and my 65.

I'm about 3 hours north east of wichita.

The truck is a long bed. The floor supports are honestly iffy, the floor pans are in pretty darn good shape. Only some minor seperation from the inner rocker boxes.

Had a guy come down from MI to my work to pickup a car, he said he made it down in 6 hours.

[1BadSS]

Can also split the truck up.

[boraxman]

Originally Posted by 1BadSS

it's an 010 casting motor, that has no front pad stampings, which means it can be the '#'s matching' motor for any originally 350 equipped vehicle.

I have never heard this, motor in my truck has no front pad stampings either.

[1BadSS]

Originally Posted by boraxman

I have never heard this, motor in my truck has no front pad stampings either.

Mine has front pad stampings with an engine suffix that is original to my 69. Your motor has probably been milled, thus removing the stamping.

[locab36]

6hr? WOW. Its a good days trip. I did it on a weekend. Its a long haul. Can You get more pics of the truck? and problem areas? Thanks
John

[Deuce]

I might be interested in the wheels and tires if you do split things up.

[ktgooch]

hello are wheels 6 bolt? can the truck drive carrying the extra parts? i live in ark city , 50 miles south of wichita. thanks kevin

[1BadSS]

OR BUY IT AS a ROLLER FOR $900 MINUS 355, 4speed, WHEELS & TIRES and GAUGES!

(WILL SUBSTITUTE A 307 and a 3SPEED WITH FACTORY WHEELS!)


ttt

[1BadSS]

Originally Posted by ktgooch

hello are wheels 6 bolt? can the truck drive carrying the extra parts? i live in ark city , 50 miles south of wichita. thanks kevin

No sir, it'll need a tow now.