One piece driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lou · 12-17-2006, 11:50 AM

Need some advice on changing to a solid driveshaft. 1971 swb smallblock w/ a 700r4 lowered 5 1/2 in rear...is there a particular year/make that will fit or is it easier to have one cut to fit.

Longhorn Man · 12-17-2006, 01:42 PM

SWB ot LWB?

70GMCer · 12-17-2006, 01:49 PM

he said 71 swb

rodstored-72 · 12-17-2006, 02:49 PM

lou,
i just had mine done at a driveshaft place. i think it was around 300 or so but to me it was worth it because i get a warranty & they measured it just right. it took about 1/2 hour to install & it is a 3-4" dia. to boot, it is supposed to be a h.d one due to my motor.

good luck!

rodstored-72

svgould · 12-17-2006, 05:02 PM

http://cgi.ebay.com/ebaymotors/ALUMI...QQcmdZViewItem

The link above is who I bought mine from.....awesome guy to work with and good pricing too!!

zden · 12-17-2006, 10:17 PM

i went to a local junkyard with tape measure in hand. found an aluminum one for $10. changed front and rear u-joint. had around $50 bucks total in it.

Longhorn Man · 12-19-2006, 12:10 AM

wow... how did I miss that?

el curioso · 12-19-2006, 12:37 AM

Quote:

Originally Posted by rodstored-72

lou,
i just had mine done at a driveshaft place. i think it was around 300 or so but to me it was worth it because i get a warranty & they measured it just right. it took about 1/2 hour to install & it is a 3-4" dia. to boot, it is supposed to be a h.d one due to my motor.

good luck!

rodstored-72

Good thing I live right next to Mexico I had mine made for 50 bucks balanced and every thing.

12-17-2006, 11:50 AM	#1
lou Registered User Join Date: Dec 2006 Location: Spring, TX Posts: 1	One piece driveshaft Need some advice on changing to a solid driveshaft. 1971 swb smallblock w/ a 700r4 lowered 5 1/2 in rear...is there a particular year/make that will fit or is it easier to have one cut to fit.

12-17-2006, 01:42 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: One piece driveshaft SWB ot LWB?

12-17-2006, 01:49 PM	#3
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: One piece driveshaft he said 71 swb __________________ 1997 GMC Sierra Ext 1965 Mustang

12-17-2006, 02:49 PM	#4
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,008	Re: One piece driveshaft lou, i just had mine done at a driveshaft place. i think it was around 300 or so but to me it was worth it because i get a warranty & they measured it just right. it took about 1/2 hour to install & it is a 3-4" dia. to boot, it is supposed to be a h.d one due to my motor. good luck! rodstored-72

12-17-2006, 05:02 PM	#5
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: One piece driveshaft http://cgi.ebay.com/ebaymotors/ALUMI...QQcmdZViewItem The link above is who I bought mine from.....awesome guy to work with and good pricing too!! __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

12-17-2006, 10:17 PM	#6
zden Registered User Join Date: Apr 2006 Location: Montgomery, TX Posts: 72	Re: One piece driveshaft i went to a local junkyard with tape measure in hand. found an aluminum one for $10. changed front and rear u-joint. had around $50 bucks total in it. __________________ 1966 Chevrolet Suburban 1955 Chevrolet Bel Air

12-19-2006, 12:10 AM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: One piece driveshaft wow... how did I miss that?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.