Attn: All bagged trucks. What did you do to your front fenders? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

abadsvt · 01-06-2007, 01:19 PM

Well i was mocking up the front fenders to see how things look when i noticed that i have to cut part of my front fender so the tire can tuck. I was debating if i want to cut out an arch that follows the tires, should i cut the entire upper section out. I am looking for ideas and want something that looks really clean. Pics would be great. Thanks alot!

Josh

CPNEJR · 01-06-2007, 01:31 PM

i would cut a radius around the tire i think it would look better IMHO

68GenIII · 01-06-2007, 02:19 PM

Quote:

Originally Posted by CPNEJR

i would cut a radius around the tire i think it would look better IMHO

I havent done it yet but this is the way I am going to do it when the time comes.

Longhorn Man · 01-06-2007, 02:58 PM

you thought of narower tires? Wheels with less backspacing?

abadsvt · 01-06-2007, 03:30 PM

Quote:

Originally Posted by Longhorn Man

you thought of narower tires? Wheels with less backspacing?

Yes but that would be the easy way and that wouldn't be any fun

. I have already bought the wheels and tires so i am making do with what i have.

abadsvt · 01-06-2007, 03:32 PM

I was thinking about doing the radius but i have noticed that alot of them just remove the inner part of the fender and was hoping to see a close up pic.

Rokcrln · 01-06-2007, 03:39 PM

All depends on if you are going to run an inner fender! Not a stock one but a custom job to keep the mud out. I plan on cutting most of the stock fenders away and building custom inners that look like the 65 style a bit. What are you going to do for hood hinges?

Kevin
LFD Inc.

abadsvt · 01-06-2007, 03:54 PM

Quote:

Originally Posted by Rokcrln

All depends on if you are going to run an inner fender! Not a stock one but a custom job to keep the mud out. I plan on cutting most of the stock fenders away and building custom inners that look like the 65 style a bit. What are you going to do for hood hinges?

Kevin
LFD Inc.

Not sure what i am going to be doing for hood hinges yet. I was thinking about doing the front tilt hood but not sure yet. I have been doing so much thinking about the suspension and frame that i havn't done too much homework on what i am want to do such as inner fenders. I like the look with the removed but i am going to want to drive the truck a little so it would be practical to have them. I am going insane.

On another side not. Have you had a chance to ship out my one man cab lift? Talk to you soon. Josh

kyull67 · 01-06-2007, 04:45 PM

try here. http://www.classictrucks.com/feature...evy_c10_truck/

Rokcrln · 01-08-2007, 12:42 AM

Quote:

Originally Posted by abadsvt

On another side not. Have you had a chance to ship out my one man cab lift? Talk to you soon. Josh

Yes it went out before you were cleared! Let me know if you do not see it in a few days!

Kevin
LFD Inc.

klownkar · 01-13-2007, 09:09 PM

I checked out the link that kyull67 posted. Not sure on the inner fender but check out the hinges. they look like Gaylord x2000 tonneau hinges. I think I will have to use that when I bag my truck. My little borther and I were just talking about that

*bskylerj* · 01-14-2007, 02:10 AM

Quote:

Originally Posted by klownkar

I checked out the link that kyull67 posted. Not sure on the inner fender but check out the hinges. they look like Gaylord x2000 tonneau hinges. I think I will have to use that when I bag my truck. My little borther and I were just talking about that

These hinges are sold out of Texas. I forget the name but you might be able to find it if you search under hinges.

1LoC10 · 01-14-2007, 02:36 AM

those hinges are made by these guys
http://www.sachserodshop.com/pdf/196.pdf

01-06-2007, 01:19 PM	#1
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Attn: All bagged trucks. What did you do to your front fenders? Well i was mocking up the front fenders to see how things look when i noticed that i have to cut part of my front fender so the tire can tuck. I was debating if i want to cut out an arch that follows the tires, should i cut the entire upper section out. I am looking for ideas and want something that looks really clean. Pics would be great. Thanks alot! Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

01-06-2007, 01:31 PM	#2
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: Attn: All bagged trucks. What did you do to your front fenders? i would cut a radius around the tire i think it would look better IMHO __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

01-06-2007, 02:58 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Attn: All bagged trucks. What did you do to your front fenders? you thought of narower tires? Wheels with less backspacing?

01-06-2007, 03:32 PM	#6
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Attn: All bagged trucks. What did you do to your front fenders? I was thinking about doing the radius but i have noticed that alot of them just remove the inner part of the fender and was hoping to see a close up pic. __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

01-06-2007, 03:39 PM	#7
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Attn: All bagged trucks. What did you do to your front fenders? All depends on if you are going to run an inner fender! Not a stock one but a custom job to keep the mud out. I plan on cutting most of the stock fenders away and building custom inners that look like the 65 style a bit. What are you going to do for hood hinges? Kevin LFD Inc.

01-06-2007, 04:45 PM	#9
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Attn: All bagged trucks. What did you do to your front fenders? try here. http://www.classictrucks.com/feature...evy_c10_truck/ __________________ The first '67 The current '67 '63 Biscayne Last edited by kyull67; 01-06-2007 at 04:47 PM.

01-13-2007, 09:09 PM	#11
klownkar Junior Member Join Date: Jan 2007 Location: southern az Posts: 35	Re: Attn: All bagged trucks. What did you do to your front fenders? I checked out the link that kyull67 posted. Not sure on the inner fender but check out the hinges. they look like Gaylord x2000 tonneau hinges. I think I will have to use that when I bag my truck. My little borther and I were just talking about that

01-14-2007, 02:36 AM	#13
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Attn: All bagged trucks. What did you do to your front fenders? those hinges are made by these guys http://www.sachserodshop.com/pdf/196.pdf __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.