new here what do you think 64 burb - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

laidout · 01-08-2007, 03:19 AM

the seats are out of a 99 chevy ext cab truck they fit perfect and i made new brackets for the rear

laidout · 01-28-2007, 03:50 PM

well the delership called me yesterday and apolgized and asked i would come back to work and even gave me a 1.00 raise so i guiess i will so hopefully i will start back on the burban soon pluc taxes are coming so i will get cought up from my lack of cash flow from not working so hope to have some progress pics soon

64shortc10 · 01-28-2007, 06:54 PM

Hi ,

Just curious if you where intrested in a tailgate-rear hatch setup instead of the barn doors on your burban. Let me know if your intrested.

Tony from Norcal.

laidout · 01-29-2007, 01:32 AM

Quote:

Originally Posted by 64shortc10

Hi ,

Just curious if you where intrested in a tailgate-rear hatch setup instead of the barn doors on your burban. Let me know if your intrested.

Tony from Norcal.

your damn right i am lol

you wanna trade or how much you want for them?? shipped to oklahoma

laidout · 03-06-2007, 11:18 AM

well porterbuilt beat me to the doors o well

but i bought my watts link today so it would be here in 2 weeks

i found a guy that wants my civic so im going to sell it to buy the strong arms,bag plates,and the bags pluc i should have enouph to buy this peace of crap topez at work to have something to drive to work

well heres a few better pics of the seats in the burban

laidout · 03-12-2007, 02:04 PM

well i spent 300 on parts i just didnt need yet lol

i need control arms but hay ill have to save up again

laidout · 03-19-2007, 12:21 AM

ya i just got the tracking # FOR my watts link i cant wait

**ChiefRocka** · 03-19-2007, 06:21 AM

Watts links work awesome !!! I build my own usually...Where you get yours from...KP ??

John

laidout · 03-21-2007, 11:43 PM

i got my watts links i tacked it on the frame but i dont thinks its right

the frame goes side ways then goes strait up so i =m stuck ive never messed with then before

BK · 03-22-2007, 02:01 AM

at ride height, the bars should be horizontal, and the pivot piece should be vertical, if not slightly more than vertical. it looks like you need to shorten your bars. when i got my watts from speedway motors, i had to shorten each side about 3" and retap them. where did you get that watts from?

**ChiefRocka** · 03-22-2007, 08:09 AM

I was just gonna say that....The bars have to be Horizontal...and the center pivot vertical.

I built my own on a customers F-150...and it worked perfect. The guy had huge 23's, with like 1/8" of space in between the tires and fender wells..didn't even touch during it's up and down travel

Good luck...looking good, otherwise !!!!

John

laidout · 03-22-2007, 01:28 PM

i taked to tim of TRUKWERKS about it and ya i need to shortin the bars a bit

and TRUKWERKS of lawton ok is where i got it he sells them for 250 shipped to your door

BK · 03-22-2007, 09:09 PM

hey, curious what your center arm pivots on. is there a bushing, or a bearing or something similar there? i have the speedway kit, and all it pivots on its just a bolt, and thats too flimsy for me.

laidout · 03-23-2007, 09:34 PM

its a bushing

laidout · 03-23-2007, 09:36 PM

i know this a ford but i had to show it off i traded my civic for it i wanted a daily dragger right now

laidout · 03-28-2007, 04:00 PM

`well thing have come up i have parts off the burban for sale and if the wife doesnt have a job by next month the burban will be for sale i will take offer tell then tho

layinrocker65 · 03-28-2007, 09:14 PM

ford

well as long as you drag the crap out of it

laidout · 03-29-2007, 01:24 AM

Quote:

Originally Posted by layinrocker65

ford

well as long as you drag the crap out of it

gostranger · 03-29-2007, 06:33 AM

where did you get the wattsd link from and how much was it??

laidout · 03-29-2007, 07:38 AM

the watts link was 250 shipped ill post where when i get of for lunch

layinrocker65 · 03-30-2007, 12:25 AM

Quote:

Originally Posted by laidout

nice, cant wait to take my truck out again and drag it. got any pics of the fords suspension?

*zeitlerusmc* · 03-30-2007, 12:51 AM

get that $hit out of this forum!

laidout · 05-27-2007, 10:54 PM

AAWWWWWWW YA

i just picked up lower tubular control arms firestone bags and bag plates all new uninstalled for for 300
from a guy local that lost intrest in his old project ill post pics some time next week

Woogeroo · 05-28-2007, 10:50 AM

Who let the Ford guy in?

*smirk*

-W

Frizzle Fry · 05-28-2007, 11:25 AM

Hey cool proj. Just FYI; the heim joint tabs on your watts should also be vertical (perp to the main rails), not angled back with the notch.

01-08-2007, 03:19 AM	#51
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb the seats are out of a 99 chevy ext cab truck they fit perfect and i made new brackets for the rear

01-28-2007, 03:50 PM	#52
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb well the delership called me yesterday and apolgized and asked i would come back to work and even gave me a 1.00 raise so i guiess i will so hopefully i will start back on the burban soon pluc taxes are coming so i will get cought up from my lack of cash flow from not working so hope to have some progress pics soon

01-28-2007, 06:54 PM	#53
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: new here what do you think 64 burb Hi , Just curious if you where intrested in a tailgate-rear hatch setup instead of the barn doors on your burban. Let me know if your intrested. Tony from Norcal.

03-06-2007, 11:18 AM	#55
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb well porterbuilt beat me to the doors o well but i bought my watts link today so it would be here in 2 weeks i found a guy that wants my civic so im going to sell it to buy the strong arms,bag plates,and the bags pluc i should have enouph to buy this peace of crap topez at work to have something to drive to work well heres a few better pics of the seats in the burban Attached Images Last edited by laidout; 03-07-2007 at 10:10 AM.

03-12-2007, 02:04 PM	#56
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb well i spent 300 on parts i just didnt need yet lol i need control arms but hay ill have to save up again Attached Images

03-19-2007, 12:21 AM	#57
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb ya i just got the tracking # FOR my watts link i cant wait

03-19-2007, 06:21 AM	#58
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: new here what do you think 64 burb Watts links work awesome !!! I build my own usually...Where you get yours from...KP ?? John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-21-2007, 11:43 PM	#59
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb i got my watts links i tacked it on the frame but i dont thinks its right the frame goes side ways then goes strait up so i =m stuck ive never messed with then before Attached Images

03-22-2007, 02:01 AM	#60
BK BK Built Join Date: Aug 2004 Location: Oroville, WA Posts: 478	Re: new here what do you think 64 burb at ride height, the bars should be horizontal, and the pivot piece should be vertical, if not slightly more than vertical. it looks like you need to shorten your bars. when i got my watts from speedway motors, i had to shorten each side about 3" and retap them. where did you get that watts from? Last edited by BK; 03-22-2007 at 02:09 AM. Reason: misspelled that

03-22-2007, 08:09 AM	#61
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: new here what do you think 64 burb I was just gonna say that....The bars have to be Horizontal...and the center pivot vertical. I built my own on a customers F-150...and it worked perfect. The guy had huge 23's, with like 1/8" of space in between the tires and fender wells..didn't even touch during it's up and down travel Good luck...looking good, otherwise !!!! John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 03-22-2007 at 08:10 AM.

03-22-2007, 01:28 PM	#62
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb i taked to tim of TRUKWERKS about it and ya i need to shortin the bars a bit and TRUKWERKS of lawton ok is where i got it he sells them for 250 shipped to your door

03-22-2007, 09:09 PM	#63
BK BK Built Join Date: Aug 2004 Location: Oroville, WA Posts: 478	Re: new here what do you think 64 burb hey, curious what your center arm pivots on. is there a bushing, or a bearing or something similar there? i have the speedway kit, and all it pivots on its just a bolt, and thats too flimsy for me.

03-23-2007, 09:34 PM	#64
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb its a bushing

03-23-2007, 09:36 PM	#65
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb i know this a ford but i had to show it off i traded my civic for it i wanted a daily dragger right now Attached Images

03-28-2007, 04:00 PM	#66
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb `well thing have come up i have parts off the burban for sale and if the wife doesnt have a job by next month the burban will be for sale i will take offer tell then tho Last edited by laidout; 03-28-2007 at 04:00 PM.



Register or Log In To remove these advertisements.

03-28-2007, 09:14 PM	#67
layinrocker65 Registered User Join Date: Jun 2005 Location: California Posts: 521	Re: new here what do you think 64 burb ford well as long as you drag the crap out of it __________________ ‘53 GMC COE stock ‘53 Chevy 3100 LSA/TR6060 http://67-72chevytrucks.com/vboard/s....php?t=805949‘ '70 Chevy C10 LWB 350/sm465 ‘74 Chevy C10 SWB 5.3/4L80e, Vintage Air, Dakota Digital, US Mags

03-29-2007, 06:33 AM	#69
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: new here what do you think 64 burb where did you get the wattsd link from and how much was it??

03-29-2007, 07:38 AM	#70
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb the watts link was 250 shipped ill post where when i get of for lunch

03-30-2007, 12:51 AM	#72
zeitlerusmc Account Suspended Join Date: Feb 2007 Location: camp pendleton Posts: 169	Re: new here what do you think 64 burb get that $hit out of this forum!

05-27-2007, 10:54 PM	#73
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: new here what do you think 64 burb AAWWWWWWW YA i just picked up lower tubular control arms firestone bags and bag plates all new uninstalled for for 300 from a guy local that lost intrest in his old project ill post pics some time next week

05-28-2007, 10:50 AM	#74
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: new here what do you think 64 burb Who let the Ford guy in? smirk -W

05-28-2007, 11:25 AM	#75
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: new here what do you think 64 burb Hey cool proj. Just FYI; the heim joint tabs on your watts should also be vertical (perp to the main rails), not angled back with the notch.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.