door difference?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dishow · 01-10-2007, 07:49 PM

hi.i need to get a drivers side door for my 67.I know where theres one off a 72.will it fit?I noticed in LMC,they list 67-71,then 72 seperatly.whats the difference?will it still fit?thanks guys.

kyull67 · 01-10-2007, 07:53 PM

I think just the inside where the door panels bolts to. It should still work on any 67-72 though.

pharcyde05 · 01-10-2007, 07:56 PM

yea i am prety shure thats right i know they will bolt up and all that the diffrance is door pannel

Huck · 01-10-2007, 08:57 PM

72 has a dimple just below the vent window where a screw goes through to tighten the outer and inner panels of the door. Unique to 72 trucks but common on older blazers/Jimmys. Doesn't create a problem to install a 72 door on 67 truck.

CPNEJR · 01-10-2007, 09:16 PM

the doors are exactyly the same except for the dimple that Huck mentioned

short69 · 01-10-2007, 09:46 PM

another difference is that '72 used a diffirent door panel than all the other years so the little stubs that the window crank and door handle connect to are about a quarter of an inch longer than the 67-71 ones.

01-10-2007, 07:49 PM	#1
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	door difference?? hi.i need to get a drivers side door for my 67.I know where theres one off a 72.will it fit?I noticed in LMC,they list 67-71,then 72 seperatly.whats the difference?will it still fit?thanks guys. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-10-2007, 07:53 PM	#2
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: door difference?? I think just the inside where the door panels bolts to. It should still work on any 67-72 though. __________________ The first '67 The current '67 '63 Biscayne

01-10-2007, 07:56 PM	#3
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: door difference?? yea i am prety shure thats right i know they will bolt up and all that the diffrance is door pannel __________________ http://www.cardomain.com/ride/2461088

01-10-2007, 08:57 PM	#4
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: door difference?? 72 has a dimple just below the vent window where a screw goes through to tighten the outer and inner panels of the door. Unique to 72 trucks but common on older blazers/Jimmys. Doesn't create a problem to install a 72 door on 67 truck.

01-10-2007, 09:16 PM	#5
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: door difference?? the doors are exactyly the same except for the dimple that Huck mentioned __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

01-10-2007, 09:46 PM	#6
short69 Registered User Join Date: Oct 2006 Location: las vegas Posts: 88	Re: door difference?? another difference is that '72 used a diffirent door panel than all the other years so the little stubs that the window crank and door handle connect to are about a quarter of an inch longer than the 67-71 ones. __________________ 69 shorty w/ 67 front clip

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.