Ford 9in set up for 63-72 coil spring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shaneschevys · 01-15-2007, 11:58 AM

Housing is 521/2 in wide, set up for disc brakes, Strange SS Street axles with 5on5 bolt pattern, nodular 3rd member with 355 gears & a detroit locker. Comes with rotors, 1 rebuilt caliper the other needs to be put back together, new 4:10 ring & pinion, & seal kit. Asking 950.00 obo. No shipping.

shaneschevys · 01-15-2007, 12:00 PM

One more

shaneschevys · 01-17-2007, 02:02 PM

ttt

noahdallas · 01-17-2007, 04:26 PM

Would you happen to have any trailing arms to go with the rear end? I have a leaf spring set up on my truck and would like to have the coil spring set up instead. My bed has been tubbed and frame has been C-notched too. Could you please tell me why the 9" rear is a better one from what I have herd. Any help would be appreciated.

BigTex · 01-17-2007, 05:10 PM

I'm interested, but have a couple of questions.
How does the width compare to a stock 1972 12 bolt?
What model and year disc brake components are used?
How old are the non-stock parts? (axles, brakes, etc)

BCOWANWHEELS · 01-17-2007, 06:25 PM

thats a detroit locker not a spool........

larry may · 01-17-2007, 11:00 PM

Is the housing sprung , or axels bent?

shaneschevys · 01-18-2007, 02:12 AM

Quote:

Originally Posted by noahdallas

Would you happen to have any trailing arms to go with the rear end? I have a leaf spring set up on my truck and would like to have the coil spring set up instead. My bed has been tubbed and frame has been C-notched too. Could you please tell me why the 9" rear is a better one from what I have herd. Any help would be appreciated.

I do have a extra set of trailing arms I will throw in with the rear end. As far as I know the 9in is stronger than a 12 bolt if you are running a higher horse engine.

noahdallas · 01-18-2007, 01:00 PM

Quote:

Originally Posted by BCOWANWHEELS

thats a detroit locker not a spool........

Could you please explain what that means?? thanks...

noahdallas · 01-18-2007, 01:01 PM

Quote:

Originally Posted by larry may

Is the housing sprung , or axels bent?

Could you please explain what that means?? thanks...

noahdallas · 01-18-2007, 01:01 PM

Quote:

Originally Posted by shaneschevys

I do have a extra set of trailing arms I will throw in with the rear end. As far as I know the 9in is stronger than a 12 bolt if you are running a higher horse engine.

Is the rear end positraction and would this be a good rear end for weekend driving? thanks.... pm sent too...

shaneschevys · 01-18-2007, 03:26 PM

Quote:

Originally Posted by larry may

Is the housing sprung , or axels bent?

The housing is good & the axles are new.

noahdallas pm sent

shaneschevys · 01-19-2007, 02:18 PM

ttt

Tutt · 01-19-2007, 06:45 PM

where did you measure the width? the ends of the housing or the wheel mounting surface?

i am interested and could pick it up.

Josh

shaneschevys · 01-19-2007, 07:06 PM

Quote:

Originally Posted by Tutt

where did you measure the width? the ends of the housing or the wheel mounting surface?

i am interested and could pick it up.

Josh

Ends of the housing.

shaneschevys · 01-20-2007, 11:20 AM

ttt

shaneschevys · 01-21-2007, 02:28 PM

ttt

ratrod67 · 01-21-2007, 07:07 PM

Has this rearend ever been in a truck and working? What would it need to be able to use?

shaneschevys · 01-22-2007, 02:45 AM

Quote:

Originally Posted by ratrod67

Has this rearend ever been in a truck and working? What would it need to be able to use?

Never installed in truck. One caliper needs to be put back together and it would need brake lines.

shaneschevys · 01-23-2007, 01:42 PM

ttt

bigblockorange · 01-23-2007, 11:13 PM

I hope I'm not stepping on any toes but how much to ship rear and trailing arms to pa 17011?

shaneschevys · 01-23-2007, 11:22 PM

Quote:

Originally Posted by bigblockorange

I hope I'm not stepping on any toes but how much to ship rear and trailing arms to pa 17011?

Sorry not shipping

barepaint · 01-24-2007, 07:42 AM

could this rear fit under My 67 3/4 ton...and can I get eight bolt axles for it? is it the same width and is it ready to be saddled up to a trailing arm system...very interested

Hotrodhenryj · 01-24-2007, 10:21 AM

If your interested in just selling the gear housing with the locker and shipping it let me know. Thanks, Chuck

shaneschevys · 01-27-2007, 03:56 PM

not shipping

01-15-2007, 11:58 AM	#1
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Ford 9in set up for 63-72 coil spring Housing is 521/2 in wide, set up for disc brakes, Strange SS Street axles with 5on5 bolt pattern, nodular 3rd member with 355 gears & a detroit locker. Comes with rotors, 1 rebuilt caliper the other needs to be put back together, new 4:10 ring & pinion, & seal kit. Asking 950.00 obo. No shipping. Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club** Last edited by shaneschevys; 01-18-2007 at 02:53 PM.

01-15-2007, 12:00 PM	#2
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Ford 9in set up for 63-72 coil spring One more Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-17-2007, 02:02 PM	#3
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Ford 9in set up for 63-72 coil spring ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-17-2007, 04:26 PM	#4
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: Ford 9in set up for 63-72 coil spring Would you happen to have any trailing arms to go with the rear end? I have a leaf spring set up on my truck and would like to have the coil spring set up instead. My bed has been tubbed and frame has been C-notched too. Could you please tell me why the 9" rear is a better one from what I have herd. Any help would be appreciated.

01-17-2007, 05:10 PM	#5
BigTex Registered User Join Date: Nov 2006 Location: DFW area Posts: 104	Re: Ford 9in set up for 63-72 coil spring I'm interested, but have a couple of questions. How does the width compare to a stock 1972 12 bolt? What model and year disc brake components are used? How old are the non-stock parts? (axles, brakes, etc) __________________ Richard 1970 Chevy (growing pile of parts) 2003 Silverado SS

01-17-2007, 06:25 PM	#6
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Ford 9in set up for 63-72 coil spring thats a detroit locker not a spool........

01-17-2007, 11:00 PM	#7
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Ford 9in set up for 63-72 coil spring Is the housing sprung , or axels bent? __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2

01-19-2007, 02:18 PM	#13
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Ford 9in set up for 63-72 coil spring ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-19-2007, 06:45 PM	#14
Tutt Registered User Join Date: Dec 2005 Location: Houston TX Posts: 77	Re: Ford 9in set up for 63-72 coil spring where did you measure the width? the ends of the housing or the wheel mounting surface? i am interested and could pick it up. Josh

01-20-2007, 11:20 AM	#16
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Ford 9in set up for 63-72 coil spring ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-21-2007, 02:28 PM	#17
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Ford 9in set up for 63-72 coil spring ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-21-2007, 07:07 PM	#18
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: Ford 9in set up for 63-72 coil spring Has this rearend ever been in a truck and working? What would it need to be able to use?

01-23-2007, 01:42 PM	#20
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Ford 9in set up for 63-72 coil spring ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-23-2007, 11:13 PM	#21
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: Ford 9in set up for 63-72 coil spring I hope I'm not stepping on any toes but how much to ship rear and trailing arms to pa 17011?

01-24-2007, 07:42 AM	#23
barepaint Senior Member Join Date: Mar 2006 Location: bay area, ca Posts: 305	Re: Ford 9in set up for 63-72 coil spring could this rear fit under My 67 3/4 ton...and can I get eight bolt axles for it? is it the same width and is it ready to be saddled up to a trailing arm system...very interested



Register or Log In To remove these advertisements.

01-24-2007, 10:21 AM	#24
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: Ford 9in set up for 63-72 coil spring If your interested in just selling the gear housing with the locker and shipping it let me know. Thanks, Chuck __________________ Arizona rust free sheetmetal

01-27-2007, 03:56 PM	#25
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Ford 9in set up for 63-72 coil spring not shipping __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.