72 K5 gas tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1LIME69 · 01-26-2007, 06:21 PM

I have a 72 K5 that needs a new gas tank was wondering where was the cheapest place to get one and which do I need (steel or poly). Also do I need to get a new sending unit and straps or will my stock one do the job?

2wdBlazer · 01-27-2007, 12:29 AM

Ebay has them. All the board venders have them too. All priced pretty close. They do come with straps but if your old ones are good, just use them as the fit is much better. Mine came with the sending unit and lock nut. The filler neck will need to be modified or you need to find a rubber hose that will fit. You will see what i'm talking about when you get your tank.

**bigdon-70blazer** · 01-27-2007, 09:46 AM

Let me ask this, I have been planning on replaceing mine because it is 1. old and may be somewhat rusty on inside and 2. has a very slight leak from a dent or rock that abraded it and someone attempted a repair but when I started disassembling the blazer last year, I noted that that area was still wet looking, not streaming out but wet. PO welded a small patch in the corner. With all the fitment issues I.m reading, would it be better to repair tis one or is it possible? Thanks

**jaros44sr** · 01-27-2007, 02:01 PM

Most things in auto related topics I will attempt, this does not include repair of fuel tanks, big bang theory.

You might try to look inside your fuel tank by removing the sending unit, then you could add a tank sealant if it is rusty.

Someone on the board wrote a very good thread on the topic of tank replacement and his troubles. Most of the problem was due to the fitment of the filler neck. Straps are another issue, save yours if you can.

Good luck guys, I'm sure some other guys will have opinions. Just my .02

pound41 · 01-27-2007, 02:50 PM

You can have a tank recoated on the inside it is supposed to be very effective. A friend had to do that for a Tbird that had no repo available.

oilyrag80 · 01-27-2007, 10:30 PM

Just buy a new steel tank then take both tanks to a raditior shop and have them solder the old neck on the new tank simple and cheap

Angelse68cal · 01-30-2007, 02:25 PM

Did you find you a tank yet?

meathead95 · 01-31-2007, 08:56 PM

take it to a radiator shop and they will clean and coat it, and can probably fix the leak for you. if it is leaking from a SMALL puncture i would fix it. if it is leaking from rust i would replace it.

krue · 02-03-2007, 02:00 AM

This thread is not a wtb, if you have something to sell please subscribe and post it on the parts board.

LUV2XCLR8 · 02-03-2007, 12:45 PM

I have one of each, the 4wd has a poly, the 2wd steel, I like the steel

65-72 chevytoys · 02-03-2007, 12:57 PM

Mine is poly I don't have to worry about it rusting ever again.

albertarose · 02-23-2007, 09:54 PM

did you install the poly tank youself? any links for this? saw the one for th steel one..but brackets are l shaped for my poly kit..thanks..leon

pumpkin · 02-23-2007, 11:08 PM

I built my own tank, 50 gallons

it hurts to fill it, but when I'm out wheeling I know I'll make it home.

Idaho Outlaw · 02-27-2007, 08:58 PM

Quote:

Originally Posted by pumpkin

I built my own tank, 50 gallons

it hurts to fill it, but when I'm out wheeling I know I'll make it home.

Where did you fit a 50 gal tank?

albertarose · 02-27-2007, 09:15 PM

I bought mine on ebay the poly kit .. they are about 200.00 give or take...brothers has the same one listed comes with sender and straps etc and mounts under rear frame rails..

BUDDY · 02-28-2007, 09:25 AM

Quote:

Originally Posted by Idaho Outlaw

Where did you fit a 50 gal tank?

Yeah, & where are the pictures/dimensions for us to copy it?

Later,
Buddy

01-26-2007, 06:21 PM	#1
1LIME69 Registered User Join Date: Nov 2006 Location: Alexis, NC Posts: 182	72 K5 gas tank I have a 72 K5 that needs a new gas tank was wondering where was the cheapest place to get one and which do I need (steel or poly). Also do I need to get a new sending unit and straps or will my stock one do the job?

01-27-2007, 12:29 AM	#2
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,212	Re: 72 K5 gas tank Ebay has them. All the board venders have them too. All priced pretty close. They do come with straps but if your old ones are good, just use them as the fit is much better. Mine came with the sending unit and lock nut. The filler neck will need to be modified or you need to find a rubber hose that will fit. You will see what i'm talking about when you get your tank. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

01-27-2007, 09:46 AM	#3
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: 72 K5 gas tank Let me ask this, I have been planning on replaceing mine because it is 1. old and may be somewhat rusty on inside and 2. has a very slight leak from a dent or rock that abraded it and someone attempted a repair but when I started disassembling the blazer last year, I noted that that area was still wet looking, not streaming out but wet. PO welded a small patch in the corner. With all the fitment issues I.m reading, would it be better to repair tis one or is it possible? Thanks Last edited by bigdon-70blazer; 10-04-2007 at 05:46 PM.

01-27-2007, 02:01 PM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: 72 K5 gas tank Most things in auto related topics I will attempt, this does not include repair of fuel tanks, big bang theory. You might try to look inside your fuel tank by removing the sending unit, then you could add a tank sealant if it is rusty. Someone on the board wrote a very good thread on the topic of tank replacement and his troubles. Most of the problem was due to the fitment of the filler neck. Straps are another issue, save yours if you can. Good luck guys, I'm sure some other guys will have opinions. Just my .02 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 01-27-2007 at 02:06 PM.

01-27-2007, 02:50 PM	#5
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: 72 K5 gas tank You can have a tank recoated on the inside it is supposed to be very effective. A friend had to do that for a Tbird that had no repo available.

01-27-2007, 10:30 PM	#6
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: 72 K5 gas tank Just buy a new steel tank then take both tanks to a raditior shop and have them solder the old neck on the new tank simple and cheap

01-30-2007, 02:25 PM	#7
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 K5 gas tank Did you find you a tank yet? Last edited by Angelse68cal; 02-28-2007 at 04:20 PM. Reason: For sale ad in wrong forum by non subscriber

01-31-2007, 08:56 PM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: 72 K5 gas tank take it to a radiator shop and they will clean and coat it, and can probably fix the leak for you. if it is leaking from a SMALL puncture i would fix it. if it is leaking from rust i would replace it. __________________ 72 2wd blazer 72 swb 4x4

02-03-2007, 02:00 AM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: 72 K5 gas tank This thread is not a wtb, if you have something to sell please subscribe and post it on the parts board. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-03-2007, 12:45 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 72 K5 gas tank I have one of each, the 4wd has a poly, the 2wd steel, I like the steel __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-03-2007, 12:57 PM	#11
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: 72 K5 gas tank Mine is poly I don't have to worry about it rusting ever again. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

02-23-2007, 09:54 PM	#12
albertarose Registered User Join Date: Dec 2005 Location: alberta canada Posts: 162	Re: 72 K5 gas tank did you install the poly tank youself? any links for this? saw the one for th steel one..but brackets are l shaped for my poly kit..thanks..leon

02-23-2007, 11:08 PM	#13
pumpkin Registered User Join Date: Apr 2006 Location: East Sooke B.C. Canada Posts: 543	Re: 72 K5 gas tank I built my own tank, 50 gallons it hurts to fill it, but when I'm out wheeling I know I'll make it home.

02-27-2007, 09:15 PM	#15
albertarose Registered User Join Date: Dec 2005 Location: alberta canada Posts: 162	Re: 72 K5 gas tank I bought mine on ebay the poly kit .. they are about 200.00 give or take...brothers has the same one listed comes with sender and straps etc and mounts under rear frame rails..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.