WTB - 2 or 3 groove SWP crank pulley - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DennyB · 02-06-2007, 12:29 PM

Anyone have a 2 or 3 groove short pump crank pulley?
I could use this by this weekend.
Thanks,

454_72_4X4 · 02-06-2007, 04:22 PM

Going to look in a few minutes.
I'll get back to ya with some pics.

DennyB · 02-06-2007, 05:16 PM

Great, Thanks!

454_72_4X4 · 02-06-2007, 09:43 PM

Here's what I have. Any idea what combination you need?

DennyB · 02-06-2007, 11:10 PM

If this is a 2 groove pully this is the one (yellow arrow).
It looks like there may be more of those. If so I'll take two of them.

Let me know How much shipped to 08757

Thanks

454_72_4X4 · 02-07-2007, 12:00 AM

I think there's 3 of those like you marked.
I just posted these in a seperate thread, (first dibs to you of course), priced 'em at 10 bucks each + shipping.
I'll get some closer pics and a shipping quote asap.

454_72_4X4 · 02-07-2007, 02:11 AM

Looks like USPS priority shipping is;

1 pulley = $5.15
2 pullies = $8.50

The one on on the right has a smaller top, (front), outside lip. I don't know if this is the way it was made or if it's been modified.
If you need a 3 groove pulley you can add a pulley to these, (the ones at the top of the pics and they look like this;

DennyB · 02-07-2007, 11:54 AM

454_72_4X4,
After looking at the close up pictures on my work PC (better monitor), there looks to be quite a bit of rust on the inside grooves of these pulleys.
My fear is when I sandblast the rust off there will still be pits where the belts ride. I think I will be better off with pulleys that don't have rusted grooves.
Thanks for your time.

Denny

454_72_4X4 · 02-08-2007, 02:12 AM

Quote:

Originally Posted by DennyB

454_72_4X4,
After looking at the close up pictures on my work PC (better monitor), there looks to be quite a bit of rust on the inside grooves of these pulleys.
My fear is when I sandblast the rust off there will still be pits where the belts ride. I think I will be better off with pulleys that don't have rusted grooves.
Thanks for your time.

Denny

Yea they're pretty rusty but actually there's not much pitting. I can sandblast part of the grooves and snap a couple "after" pics if ya want.
If the weather warms up so I can heat my shop I can sandblast the entire set but right now it's just to hard on my compressor to make it run much.

If ya don't find anything else, let me know.

02-06-2007, 12:29 PM	#1
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	WTB - 2 or 3 groove SWP crank pulley Anyone have a 2 or 3 groove short pump crank pulley? I could use this by this weekend. Thanks, __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

02-06-2007, 04:22 PM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WTB - 2 or 3 groove SWP crank pulley Going to look in a few minutes. I'll get back to ya with some pics. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-06-2007, 05:16 PM	#3
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: WTB - 2 or 3 groove SWP crank pulley Great, Thanks! __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

02-06-2007, 09:43 PM	#4
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WTB - 2 or 3 groove SWP crank pulley Here's what I have. Any idea what combination you need? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-06-2007, 11:10 PM	#5
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: WTB - 2 or 3 groove SWP crank pulley If this is a 2 groove pully this is the one (yellow arrow). It looks like there may be more of those. If so I'll take two of them. Let me know How much shipped to 08757 Thanks Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

02-07-2007, 12:00 AM	#6
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WTB - 2 or 3 groove SWP crank pulley I think there's 3 of those like you marked. I just posted these in a seperate thread, (first dibs to you of course), priced 'em at 10 bucks each + shipping. I'll get some closer pics and a shipping quote asap. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-07-2007, 02:11 AM	#7
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WTB - 2 or 3 groove SWP crank pulley Looks like USPS priority shipping is; 1 pulley = $5.15 2 pullies = $8.50 The one on on the right has a smaller top, (front), outside lip. I don't know if this is the way it was made or if it's been modified. If you need a 3 groove pulley you can add a pulley to these, (the ones at the top of the pics and they look like this; __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-07-2007, 11:54 AM	#8
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: WTB - 2 or 3 groove SWP crank pulley 454_72_4X4, After looking at the close up pictures on my work PC (better monitor), there looks to be quite a bit of rust on the inside grooves of these pulleys. My fear is when I sandblast the rust off there will still be pits where the belts ride. I think I will be better off with pulleys that don't have rusted grooves. Thanks for your time. Denny Last edited by DennyB; 02-07-2007 at 11:55 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.