More Blazer parts colected for some day! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 02-26-2007, 07:54 PM

A board member posted about some blazer parts for sale on graigs list. I contacted the member and he said he was not interested but wanted to post if any one was. Wel as it turns out after thinking about what I need for my 2wd Blazer I thought I would go look at it at least and here is what I ended up getting.

I got both bed sides that are almost damage free and are 100% "rust " free. Yes they have surface rust but as you can see from one of the other pics 2 minutes with a DA 180 grit and the problem is gone

The last owner sanded teh paint off or had it blasted and just never covered it up after wards. I will get it all soda blasted and epoxy sealed for later use. I also took the front of the tub because you can never have to many un-cut A/C dashes or "rust" free windshield frames for these Blazers. Again it will be blasted and epoxy sealed soon for later use if needed. The I got a set of truck door shells that are in great shape. The only damage is a few sets of mirror holes, now if I could only find someone who could weld

I think I will have these blasted inside and out at the same time as the rest of the parts.

Now I just need to trim down the front tub just to the part I want to hold on too and remove the bed sides from what is left of the floor. How do you like my hauling set up

Also here are a few pics of my Blazer side's that need these donors bad.

Kevin
LFD Inc.

Rokcrln · 02-26-2007, 07:56 PM

A few more. Also I already have the dents dolly'd out of the bed sides. All of 20min work

Kevin
LFD Inc.

1969k10stepside · 02-26-2007, 07:56 PM

See see,there is a good use for a long bed

Rokcrln · 02-26-2007, 07:58 PM

The bottom corner of the door was the worst of it and it is still great I think.

Kevin
LFD Inc.

Rokcrln · 02-26-2007, 08:00 PM

Quote:

Originally Posted by 1969k10stepside

See see,there is a good use for a long bed

Yes but if it was a short bed already the new hitch would be installed and I could have used my car trailer instead. Ever try lifting a rear tub 4' in the air with only two people

Kevin
LFD Inc.

**jaros44sr** · 02-26-2007, 08:02 PM

Hey Kev, there outa' be a law, no man should have that many cool projects to work on. haha

Rokcrln · 02-26-2007, 10:05 PM

Red-Neck wall ART what you alL think

Also just so I do not get tons of PM none of these parts are for sale! When my Blazer is done then we will see what was needed and what was not.. Also I am not taking names down for first in-line

Kevin
LFD Inc.

bouncytruck · 02-26-2007, 11:11 PM

Does this mean the Blazer project has been moved to the top of the list?

Rokcrln · 02-26-2007, 11:35 PM

Quote:

Originally Posted by bouncytruck

Does this mean the Blazer project has been moved to the top of the list?

That really is funny! No if anything it is even further down the list. But it still is on the list so when maybe needed parts come up I stock up.

Kevin
LFD Inc.

02-26-2007, 07:54 PM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	More Blazer parts colected for some day! A board member posted about some blazer parts for sale on graigs list. I contacted the member and he said he was not interested but wanted to post if any one was. Wel as it turns out after thinking about what I need for my 2wd Blazer I thought I would go look at it at least and here is what I ended up getting. I got both bed sides that are almost damage free and are 100% "rust " free. Yes they have surface rust but as you can see from one of the other pics 2 minutes with a DA 180 grit and the problem is gone The last owner sanded teh paint off or had it blasted and just never covered it up after wards. I will get it all soda blasted and epoxy sealed for later use. I also took the front of the tub because you can never have to many un-cut A/C dashes or "rust" free windshield frames for these Blazers. Again it will be blasted and epoxy sealed soon for later use if needed. The I got a set of truck door shells that are in great shape. The only damage is a few sets of mirror holes, now if I could only find someone who could weld I think I will have these blasted inside and out at the same time as the rest of the parts. Now I just need to trim down the front tub just to the part I want to hold on too and remove the bed sides from what is left of the floor. How do you like my hauling set up Also here are a few pics of my Blazer side's that need these donors bad. Kevin LFD Inc. Attached Images Last edited by Rokcrln; 02-26-2007 at 09:08 PM.

02-26-2007, 07:56 PM	#2
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: More Blazer parts colected for some day! A few more. Also I already have the dents dolly'd out of the bed sides. All of 20min work Kevin LFD Inc. Attached Images

02-26-2007, 07:56 PM	#3
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: More Blazer parts colected for some day! See see,there is a good use for a long bed Last edited by 1969k10stepside; 02-26-2007 at 07:57 PM.

02-26-2007, 07:58 PM	#4
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: More Blazer parts colected for some day! The bottom corner of the door was the worst of it and it is still great I think. Kevin LFD Inc. Attached Images

02-26-2007, 08:02 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: More Blazer parts colected for some day! Hey Kev, there outa' be a law, no man should have that many cool projects to work on. haha __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-26-2007, 10:05 PM	#7
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: More Blazer parts colected for some day! Red-Neck wall ART what you alL think Also just so I do not get tons of PM none of these parts are for sale! When my Blazer is done then we will see what was needed and what was not.. Also I am not taking names down for first in-line Kevin LFD Inc. Attached Images

02-26-2007, 11:11 PM	#8
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: More Blazer parts colected for some day! Does this mean the Blazer project has been moved to the top of the list? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.