split seat? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

babyblue69 · 03-03-2007, 09:21 AM

What year model truck seats can easliy be installed in my 69 C10. (split seat)?

**Palf70Step** · 03-03-2007, 11:11 AM

88-98 full size GM truck., especially the 88-94 years.

Shyguy · 03-03-2007, 12:53 PM

Back in 98 I replaced the split seat in my 92 GMC 1 Ton Duallie with a seat out of a 96 Chevy pickup. I gave my 92 GMC seat to my nephew.

He put it in his 72 C-10 without much trouble. Once he got it installed it looked real good.

Danny - SEMO

st1x10 · 03-03-2007, 03:25 PM

Do all the holes for the bracket and floor line or is drilling required?

dan42 · 03-03-2007, 04:48 PM

I'm putting in a '91 CHevy regular cab bench - you can reinforce it in the right spots, it's foam so it bounces less than a stock seat, and it doesn't have the headrests on it - plus it's pretty comfortable - (mine's a '70 with the gas tank under the bed) - I'll post pix when it's done.

**Palf70Step** · 03-03-2007, 05:59 PM

Quote:

Originally Posted by st1x10

Do all the holes for the bracket and floor line or is drilling required?

You'll have to do a little drilling and bracing for the middle and rear mounts. It is easy and well worth the effort.

Shyguy · 03-03-2007, 06:02 PM

Putting the 96 seat in my 92 GMC Duallie required some drilling.

Also when my nephew put the seat from my 92 GMC in his 72 C-10 he had to do some drilling.

Danny - SEMO

03-03-2007, 09:21 AM	#1
babyblue69 Registered User Join Date: Feb 2007 Location: Easley,SC Posts: 40	split seat? What year model truck seats can easliy be installed in my 69 C10. (split seat)?

03-03-2007, 11:11 AM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,220	Re: split seat? 88-98 full size GM truck., especially the 88-94 years. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 03-03-2007 at 11:15 AM.

03-03-2007, 12:53 PM	#3
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: split seat? Back in 98 I replaced the split seat in my 92 GMC 1 Ton Duallie with a seat out of a 96 Chevy pickup. I gave my 92 GMC seat to my nephew. He put it in his 72 C-10 without much trouble. Once he got it installed it looked real good. Danny - SEMO

03-03-2007, 03:25 PM	#4
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: split seat? Do all the holes for the bracket and floor line or is drilling required? __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

03-03-2007, 04:48 PM	#5
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: split seat? I'm putting in a '91 CHevy regular cab bench - you can reinforce it in the right spots, it's foam so it bounces less than a stock seat, and it doesn't have the headrests on it - plus it's pretty comfortable - (mine's a '70 with the gas tank under the bed) - I'll post pix when it's done.

03-03-2007, 06:02 PM	#7
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: split seat? Putting the 96 seat in my 92 GMC Duallie required some drilling. Also when my nephew put the seat from my 92 GMC in his 72 C-10 he had to do some drilling. Danny - SEMO

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.