PARTS: tach, tilt, gate and misc... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 03-07-2007, 02:27 PM

Hope to start working on a truck this spring so it is time to clean up a little and generate some funds.
Vacuum tin. Nice condition. $45 shipped
Black steering wheels from 73 and newer are $35 each shipped. Both are nice.
Tach cluster with air gauge and 80 pound oil gauge. I buffed the lens and added the correct fuel gauge. This will need a printed circuit. The tach needle moves freely. I do not know what works or what doesn't. Bezel is pretty nice with a crack on the left side where the screw goes in. Tach head has some fading. $225 shipped.
Tilt column from a pickup. Shifter feels tight ans so does the tilt mech. It is missing the turn signal parts and someone got into the wiring but patched it. This is the way i bought it. $225 shipped
Amp gauge. looks like it should fit in a cluster. Looks nice. $15 shipped
GMC tailgate. No rust holes. Very little bow. Does have some small dents on top. Should be a pretty nice gate with paint. $150 NO ship
68 Chevy 3/4 ton hub caps. These go on the wheels with spring clips. Drivers. $35 shipped
GMC headlight rings. Will clean up ok. Bigger ding in one of them. Drivers $30 shipped
68 chevy grill with trim. Couple small dings. $175 NO ship
Respond in thread, will ship to canada, but will be a little more.

**too much stuff** · 03-07-2007, 02:31 PM

More pics. I am also looking for NOS woodgrain lower chrome, 69-72 tow hooks, am/fm, and a speedwarning gauge.

**too much stuff** · 03-07-2007, 02:33 PM

Last bunch of pics for now...

PT'S 70 CST · 03-07-2007, 04:48 PM

I will take the tach.Do you take paypal.

PT

LUV2XCLR8 · 03-07-2007, 04:59 PM

Nice looking grill, should not last long, wish you were closer

RicksTrucks · 03-07-2007, 05:03 PM

Quote:

Originally Posted by LUV2XCLR8

Nice looking grill, should not last long, wish you were closer

Wish I knew you needed one, I got a few.

**too much stuff** · 03-07-2007, 05:13 PM

Sorry guys, no paypal.
PT, PM sent on the tach...

LUV2XCLR8 · 03-07-2007, 05:13 PM

Quote:

Originally Posted by RicksTrucks

Wish I knew you needed one, I got a few.

Rick, I will keep that in mind, always looking for a clean spare for my wall

Bob Moore · 03-08-2007, 01:21 AM

Could you please take a picture of a hubcap turned over with a tape measure to show the diameter? I have one(?) but don't know if mine is 1/2T or 3/4T.

Sure would appreciate it. Thanks - Bob

**too much stuff** · 03-08-2007, 01:49 AM

Bob, i had this one on file. These caps came off the 8 1/2" wide factory wheels.

Down south truckin · 03-08-2007, 01:50 AM

P/M sent on possible trades! thanks, Mike

Bob Moore · 03-08-2007, 03:10 PM

Thanks - Bob

**too much stuff** · 03-09-2007, 11:56 AM

Sale pending with PT on the tach.
Down south has interest in the tilt.

**too much stuff** · 03-10-2007, 04:10 PM

ttt

**too much stuff** · 03-11-2007, 11:25 PM

Last shot before e-bay or back to storage...

PT'S 70 CST · 03-19-2007, 09:15 PM

M/O was sent out on 3/8 for the tach, let me know when you get it.

Thanks PT

Bob Moore · 03-19-2007, 09:55 PM

What is the best cost to my door on the vac tin? Biz location in Tacoma, WA 98407.

Thanks - Bob

**too much stuff** · 03-19-2007, 10:02 PM

Bob, how about $40? This is a factory stamped one.

Bob Moore · 03-20-2007, 12:36 PM

Let's do it! PM an address and I'll get you paid.

Thanks - Bob

**too much stuff** · 03-26-2007, 08:24 PM

Pic added for bob moore...

03-07-2007, 02:27 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	PARTS: tach, tilt, gate and misc... Hope to start working on a truck this spring so it is time to clean up a little and generate some funds. Vacuum tin. Nice condition. $45 shipped Black steering wheels from 73 and newer are $35 each shipped. Both are nice. Tach cluster with air gauge and 80 pound oil gauge. I buffed the lens and added the correct fuel gauge. This will need a printed circuit. The tach needle moves freely. I do not know what works or what doesn't. Bezel is pretty nice with a crack on the left side where the screw goes in. Tach head has some fading. $225 shipped. Tilt column from a pickup. Shifter feels tight ans so does the tilt mech. It is missing the turn signal parts and someone got into the wiring but patched it. This is the way i bought it. $225 shipped Amp gauge. looks like it should fit in a cluster. Looks nice. $15 shipped GMC tailgate. No rust holes. Very little bow. Does have some small dents on top. Should be a pretty nice gate with paint. $150 NO ship 68 Chevy 3/4 ton hub caps. These go on the wheels with spring clips. Drivers. $35 shipped GMC headlight rings. Will clean up ok. Bigger ding in one of them. Drivers $30 shipped 68 chevy grill with trim. Couple small dings. $175 NO ship Respond in thread, will ship to canada, but will be a little more. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-07-2007, 02:31 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... More pics. I am also looking for NOS woodgrain lower chrome, 69-72 tow hooks, am/fm, and a speedwarning gauge. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-07-2007, 02:33 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Last bunch of pics for now... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-07-2007, 04:48 PM	#4
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: PARTS: tach, tilt, gate and misc... I will take the tach.Do you take paypal. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-07-2007, 04:59 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: PARTS: tach, tilt, gate and misc... Nice looking grill, should not last long, wish you were closer __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-07-2007, 05:13 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Sorry guys, no paypal. PT, PM sent on the tach... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-08-2007, 01:21 AM	#9
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... Could you please take a picture of a hubcap turned over with a tape measure to show the diameter? I have one(?) but don't know if mine is 1/2T or 3/4T. Sure would appreciate it. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-08-2007, 01:49 AM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Bob, i had this one on file. These caps came off the 8 1/2" wide factory wheels. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-08-2007, 01:50 AM	#11
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: PARTS: tach, tilt, gate and misc... P/M sent on possible trades! thanks, Mike

03-08-2007, 03:10 PM	#12
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-09-2007, 11:56 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Sale pending with PT on the tach. Down south has interest in the tilt. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-10-2007, 04:10 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... ttt __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-11-2007, 11:25 PM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Last shot before e-bay or back to storage... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-19-2007, 09:15 PM	#16
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: PARTS: tach, tilt, gate and misc... M/O was sent out on 3/8 for the tach, let me know when you get it. Thanks PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-19-2007, 09:55 PM	#17
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... What is the best cost to my door on the vac tin? Biz location in Tacoma, WA 98407. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

03-19-2007, 10:02 PM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Bob, how about $40? This is a factory stamped one. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-20-2007, 12:36 PM	#19
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... Let's do it! PM an address and I'll get you paid. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-26-2007, 08:24 PM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Pic added for bob moore... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.