Vortec Head Headers??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevjayfsd · 11-21-2002, 02:38 PM

Does anyone know where i can get some headers that will fit a 2.25 exhaust, for my vortec heads???

And what year model are my Scoggin and Dickey vortec heads
__-__???

I am in the market for ceramic headers...I am too lazy to start looking right now..
Thanks
Jason

Blazer1970 · 11-21-2002, 03:13 PM

The Vortec heads do not change the interface for the exhaust manifolds/headers. Go by what is the application for your truck year and model.

chevjayfsd · 11-21-2002, 08:38 PM

SWWEEETTTTT...I didnt know that

So even If the headers have round ports i can put them on my square ported heads

Any suggestions..
Thanks
Jason

crazy longhorn · 11-21-2002, 08:52 PM

For the amount of drop you have, you might look at a set of 3/4 lenght chevelle headers to tuck them up . I cant help on the pn, but you might give Shane a holler.. good luck

Hooter · 11-22-2002, 12:11 AM

go with a set ofshortys or blug huggers. They wont scrape on the pavement and they keep the heat down

11-21-2002, 02:38 PM	#1
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	Vortec Head Headers??? Does anyone know where i can get some headers that will fit a 2.25 exhaust, for my vortec heads??? And what year model are my Scoggin and Dickey vortec heads __-__??? I am in the market for ceramic headers...I am too lazy to start looking right now.. Thanks Jason __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

11-21-2002, 03:13 PM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	The Vortec heads do not change the interface for the exhaust manifolds/headers. Go by what is the application for your truck year and model. __________________ Tim

11-21-2002, 08:38 PM	#3
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	SWWEEETTTTT...I didnt know that So even If the headers have round ports i can put them on my square ported heads Any suggestions.. Thanks Jason __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

11-21-2002, 08:52 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	For the amount of drop you have, you might look at a set of 3/4 lenght chevelle headers to tuck them up . I cant help on the pn, but you might give Shane a holler.. good luck __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

11-22-2002, 12:11 AM	#5
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	go with a set ofshortys or blug huggers. They wont scrape on the pavement and they keep the heat down __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.