Dana 60's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brinegar · 03-09-2007, 11:53 PM

Any interest in a set of Dana 60's out of a 1986 Chevy 1-ton dually?
Asking $1,500 PRICE REDUCTION $1,200
Make an offer if you are interested. The price isn't firm.
To convert to a single wheel truck all you have to do is change out the front hub/rotor.

I will deliver within a reasonable distance.
Thanks
Bill

1969k10stepside · 03-09-2007, 11:58 PM

Tempting deal,out of my area though.I still want to find a bunch of d60 fronts to sell so I can afford to paint the 71...its amazing what a little(well,a d60 isnt little) axle can bring

brinegar · 03-10-2007, 12:02 AM

I agree. They aren't cheap, but well worth the money. I lucked out and found a single wheel set before I converted the dually pair.

1969 GMC · 03-10-2007, 03:07 AM

by 60's do you mean a 60 front and 14 bolt rear, or 60 front and 70 rear? K30's didnt come with 60 rears.

also, IMO i think you're asking a tad too much, especially since its a DRW. yeah, you can convert to SRW easily, but thats another $300 there.

thirdly, i didnt think we could post for sale ads here? perhaps I am wrong. The rules on this site change just about daily.

customcamper72 · 03-10-2007, 07:34 AM

I think the price is fair, it may be a little high considering it is a drw, around here they sell for around 800 for a dually & 1000 for a srw. i know a couple guys who had the dually flange machined off the hub and made it into a srw.

**special-K** · 03-10-2007, 09:23 AM

I`m confused,too.These axles were under the truck,but not original,right?Only Napcos with Spicers were made before`75.I had a`71 SRW C/30 Napco conversion.It had drum brakes on front,since it was the old axle they used from the`50s...A bit of trivia for you 4x-nuts.

brinegar · 03-10-2007, 01:50 PM

The front is a dana 60 and the rear is the big 14 bolt. The gear ratio is 4.10 in both. These are out of a 1986 K-30 dually. The spring perches are the same width as the 67-72 4x4's.
Any questions feel free to give me a call.
307-324-3039
Bill

1967k30 · 03-10-2007, 06:59 PM

If you get $1500 tell me who and where cause I'd take that for all the D60's I sell. I've never gotten that much even for a SRW and I'm in the axle selling business.

stllookn · 03-10-2007, 09:15 PM

I have not been on the parts board in a while, did the rules change? I didn't think it was polite to comment on the price...take it, leave it or make an offer...just my 0.02/

"VI. If you do not like the price of an item, look further. Comments on value, condition etc will not be tolerated."

**special-K** · 03-17-2007, 02:53 PM

The price is right on.I see axle sets go as much as $1,600 depending on condition.Converting isn`t an issue,either.Anyone that`s serious enough to plunk the bucks down to upgrade to a Dana60 is also going to want to overhaul the whole thing anyway.That`s what I do unless that`s been done.Then they`re worth $1,600.Also,not everyone wants singles and these are exactly what they want.They`re not just for play toys.
I`ve bought from Brinegar before and he`s a square dealer.

brinegar · 03-17-2007, 06:40 PM

Thanks for the compliment. Hopefully someone will want them before my wife gets tired of them taking up garage space.
Bill

krue · 03-17-2007, 06:47 PM

Quote:

Originally Posted by stllookn

I have not been on the parts board in a while, did the rules change? I didn't think it was polite to comment on the price...take it, leave it or make an offer...just my 0.02/

"VI. If you do not like the price of an item, look further. Comments on value, condition etc will not be tolerated."

No more commentary on prices, if you don't like the price, move on.

03-09-2007, 11:53 PM	#1
brinegar Junior Member Join Date: Aug 2004 Location: Laramie, Wyoming Posts: 126	Dana 60's Any interest in a set of Dana 60's out of a 1986 Chevy 1-ton dually? Asking $1,500 PRICE REDUCTION $1,200 Make an offer if you are interested. The price isn't firm. To convert to a single wheel truck all you have to do is change out the front hub/rotor. I will deliver within a reasonable distance. Thanks Bill __________________ 1972 Fleetside LB 4x4 Last edited by brinegar; 03-27-2007 at 08:38 PM. Reason: Price reduction

03-09-2007, 11:58 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: Dana 60's Tempting deal,out of my area though.I still want to find a bunch of d60 fronts to sell so I can afford to paint the 71...its amazing what a little(well,a d60 isnt little) axle can bring

03-10-2007, 12:02 AM	#3
brinegar Junior Member Join Date: Aug 2004 Location: Laramie, Wyoming Posts: 126	Re: Dana 60's I agree. They aren't cheap, but well worth the money. I lucked out and found a single wheel set before I converted the dually pair. __________________ 1972 Fleetside LB 4x4

03-10-2007, 03:07 AM	#4
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Re: Dana 60's by 60's do you mean a 60 front and 14 bolt rear, or 60 front and 70 rear? K30's didnt come with 60 rears. also, IMO i think you're asking a tad too much, especially since its a DRW. yeah, you can convert to SRW easily, but thats another $300 there. thirdly, i didnt think we could post for sale ads here? perhaps I am wrong. The rules on this site change just about daily. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

03-10-2007, 07:34 AM	#5
customcamper72 Registered User Join Date: Jan 2007 Location: wisconsin Posts: 51	Re: Dana 60's I think the price is fair, it may be a little high considering it is a drw, around here they sell for around 800 for a dually & 1000 for a srw. i know a couple guys who had the dually flange machined off the hub and made it into a srw.

03-10-2007, 09:23 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Dana 60's I`m confused,too.These axles were under the truck,but not original,right?Only Napcos with Spicers were made before`75.I had a`71 SRW C/30 Napco conversion.It had drum brakes on front,since it was the old axle they used from the`50s...A bit of trivia for you 4x-nuts. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-10-2007, 01:50 PM	#7
brinegar Junior Member Join Date: Aug 2004 Location: Laramie, Wyoming Posts: 126	Re: Dana 60's The front is a dana 60 and the rear is the big 14 bolt. The gear ratio is 4.10 in both. These are out of a 1986 K-30 dually. The spring perches are the same width as the 67-72 4x4's. Any questions feel free to give me a call. 307-324-3039 Bill __________________ 1972 Fleetside LB 4x4

03-10-2007, 06:59 PM	#8
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Dana 60's If you get $1500 tell me who and where cause I'd take that for all the D60's I sell. I've never gotten that much even for a SRW and I'm in the axle selling business. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

03-10-2007, 09:15 PM	#9
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Dana 60's I have not been on the parts board in a while, did the rules change? I didn't think it was polite to comment on the price...take it, leave it or make an offer...just my 0.02/ "VI. If you do not like the price of an item, look further. Comments on value, condition etc will not be tolerated." __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 03-10-2007 at 09:19 PM.

03-17-2007, 02:53 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Dana 60's The price is right on.I see axle sets go as much as $1,600 depending on condition.Converting isn`t an issue,either.Anyone that`s serious enough to plunk the bucks down to upgrade to a Dana60 is also going to want to overhaul the whole thing anyway.That`s what I do unless that`s been done.Then they`re worth $1,600.Also,not everyone wants singles and these are exactly what they want.They`re not just for play toys. I`ve bought from Brinegar before and he`s a square dealer. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-17-2007 at 02:54 PM.

03-17-2007, 06:40 PM	#11
brinegar Junior Member Join Date: Aug 2004 Location: Laramie, Wyoming Posts: 126	Re: Dana 60's Thanks for the compliment. Hopefully someone will want them before my wife gets tired of them taking up garage space. Bill __________________ 1972 Fleetside LB 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.