More Work on the New Truck. Please Help!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JeepGuy · 03-13-2007, 07:27 PM

Hey guys
Went down and work on the truck again this weekend. I got it out of the barn and drove it around about 2 miles and it was actually running well! I also found out that it is the 250 (I6). I also have a Haynes manual on the way from ebay so that will surely help me out. Here are a few more pics of it and alot of questions.

1. Where can I get the OEM replacement windshield wipers. Not the whole thing but the actually metal blade and rubber blade combo. Advanced and AutoZone had nothing on them.

2. I have the 3spd tranny and I noticed that there was a fill plug on the passenger side of the tranny but I could not locate the drain plug. Is there a drain that I can find or what?

3. I broke the dome light cover that is in the cab. The entire thing was shot and it shattered when I tried to remove it. Is there a replacement assembly that I can buy.

4. I have noticed guys keeping saying to buy from the vendors on here, but I can not find any. Is there a C10 parts catalog that I can order so I can see the parts. I use Quadratec for my Jeep and that seems to work well.

Here are the pics and thanks for all the help guys.

250 here!

Thanks again.

cfoust3 · 03-13-2007, 08:02 PM

Ebay usually has a lot of the replacement dome lights I actually got a chrome one off there for like 15 bucks.

woodrow59 · 03-13-2007, 08:09 PM

1. 15" blade They are pretty much universal.
2. I have no idea !!!!!!
3. Available at the vendors.
4. Get an LMCtruck catalog (google them), they have detailed pictures, and go here for vendors http://67-72chevytrucks.com/links/browselinks.php?c=2

71swb4x4 · 03-13-2007, 08:11 PM

Here's a list of vendors: http://67-72chevytrucks.com/links/browselinks.php?c=2
I have used GMCPauls quite a bit, they are great guys. I haven't heard anything bad about any of the board vendors.

03-13-2007, 07:27 PM	#1
JeepGuy Registered User Join Date: Mar 2007 Location: Raleigh, NC Posts: 12	More Work on the New Truck. Please Help!! Hey guys Went down and work on the truck again this weekend. I got it out of the barn and drove it around about 2 miles and it was actually running well! I also found out that it is the 250 (I6). I also have a Haynes manual on the way from ebay so that will surely help me out. Here are a few more pics of it and alot of questions. 1. Where can I get the OEM replacement windshield wipers. Not the whole thing but the actually metal blade and rubber blade combo. Advanced and AutoZone had nothing on them. 2. I have the 3spd tranny and I noticed that there was a fill plug on the passenger side of the tranny but I could not locate the drain plug. Is there a drain that I can find or what? 3. I broke the dome light cover that is in the cab. The entire thing was shot and it shattered when I tried to remove it. Is there a replacement assembly that I can buy. 4. I have noticed guys keeping saying to buy from the vendors on here, but I can not find any. Is there a C10 parts catalog that I can order so I can see the parts. I use Quadratec for my Jeep and that seems to work well. Here are the pics and thanks for all the help guys. 250 here! Thanks again. __________________ 1969 Chevy C10 LWB 2WD I6 3 on the tree. Blue Goose. 1999 Chevy Tahoe LT 4x4 285's. Pewter Metallic. 1983 Jeep CJ-7 I6 D300 AMC 20 31s. Jamacian Beige. 2007 Honda Accord SE 4 door I4 (Wifey)

03-13-2007, 08:02 PM	#2
cfoust3 Registered User Join Date: Mar 2007 Location: Hartford City, Indiana Posts: 54	Re: More Work on the New Truck. Please Help!! Ebay usually has a lot of the replacement dome lights I actually got a chrome one off there for like 15 bucks. __________________ Let me tell you what Melba Toast is packin' right here, all right. We got 4:11 Positrac outback, 750 double pumper, Edelbrock intake, bored over 30, 11 to 1 pop-up pistons, turbo-jet 390 horsepower. We're talkin' some ****in' muscle. -Wooderson From the movie Dazed and Confused

03-13-2007, 08:09 PM	#3
woodrow59 OzarkHillbilly in Atlanta Join Date: May 2002 Location: Douglasville, Ga. Salem, Mo. Posts: 386	Re: More Work on the New Truck. Please Help!! 1. 15" blade They are pretty much universal. 2. I have no idea !!!!!! 3. Available at the vendors. 4. Get an LMCtruck catalog (google them), they have detailed pictures, and go here for vendors http://67-72chevytrucks.com/links/browselinks.php?c=2 __________________ 72 custom/10 LWB 68 Longhorn C20 Custom Camper (sold)

03-13-2007, 08:11 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: More Work on the New Truck. Please Help!! Here's a list of vendors: http://67-72chevytrucks.com/links/browselinks.php?c=2 I have used GMCPauls quite a bit, they are great guys. I haven't heard anything bad about any of the board vendors. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.