Pic Request - TH350 linkage - column to tranny - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Shane* · 03-14-2007, 08:04 PM

Does anyone have access to a TH350 linkage that they can post a pic? Off the truck would be GREAT!

Also, if you have this linkage, could you measure the linkage from the column mount to the shift lever ... center of hole to center of hole?

Many Thanks!

Sammy · 03-14-2007, 09:48 PM

Great I am waiting to see what I need to find for mine. Please someone help us out.

pcmcobra · 03-14-2007, 10:01 PM

im not sure what you r exactly asking for. I have th350 in my truck...
oops mine is 86, wrong year forum...sorry

Bob D · 03-14-2007, 10:12 PM

This is the only pic I have on file, and I dont have the camera at the moment to take more. The rod on mine was spliced together with a threaded pipe nipple ( thanks PO) I made a new one after getting rough measurements with the lever in P and the tranny in Park, and then added an inch or so for adjustment.

Bob

The black wire you see is just an old ground wire laying across the tranny.

*Shane* · 03-14-2007, 11:12 PM

Thanks Bob D ... I was hoping for an original type linkage if anyone has one that is available for pics.

I have purchased a Lokar linkage kit and by rough measuring and "eyeballing" it looks to be short. I don't want to open it up and assemble to find out it's too short. It came in a shrink-wrap/laminated type package and if it's open they won't take it back.

I wanted to see a pic to see if the linkage has any curves made into it or is it a straight piece and the measurement on the linkage will tell me if the Lokar linkage kit will work.

Thanks!

JimKshortstep4x4 · 03-15-2007, 07:32 PM

I did not know if you have a 2wd or a 4wd so I took a picture of both and measured them from pivot to pivot. (Of course the upper pivot is adjustable).

Measurements were made to the middle of the adjustment diameter on the upper end. The 4x4 measures 22 1/2" and has curves. The 2wd measures 20 1/2" and is almost straight.

Jim

*Shane* · 03-15-2007, 07:56 PM

Thank You ... Thank You ... Thank You JimK!

I owe you BIG time!

JimKshortstep4x4 · 03-16-2007, 05:32 AM

You are welcome!

Good luck on your project.

Jim

Orange · 03-16-2007, 09:44 AM

I have the Lokar kit Shane - it worked.

DLB

71Chev · 03-16-2007, 04:26 PM

Shane this may help.
http://67-72chevytrucks.com/vboard/s...ad.php?t=95438

*Shane* · 03-16-2007, 07:03 PM

Thanks guys ... much appreciated!

03-14-2007, 08:04 PM	#1
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Pic Request - TH350 linkage - column to tranny Does anyone have access to a TH350 linkage that they can post a pic? Off the truck would be GREAT! Also, if you have this linkage, could you measure the linkage from the column mount to the shift lever ... center of hole to center of hole? Many Thanks!

03-14-2007, 09:48 PM	#2
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Pic Request - TH350 linkage - column to tranny Great I am waiting to see what I need to find for mine. Please someone help us out. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-14-2007, 10:01 PM	#3
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Pic Request - TH350 linkage - column to tranny im not sure what you r exactly asking for. I have th350 in my truck... oops mine is 86, wrong year forum...sorry __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native Last edited by pcmcobra; 03-14-2007 at 10:01 PM.

03-14-2007, 10:12 PM	#4
Bob D Rolled on Paint Club Join Date: Jan 2006 Location: Windham, CT. Posts: 232	Re: Pic Request - TH350 linkage - column to tranny This is the only pic I have on file, and I dont have the camera at the moment to take more. The rod on mine was spliced together with a threaded pipe nipple ( thanks PO) I made a new one after getting rough measurements with the lever in P and the tranny in Park, and then added an inch or so for adjustment. Bob The black wire you see is just an old ground wire laying across the tranny. Attached Images __________________ 1970 GMC 1500 swb fleetside SB 355ci. Smog heads Summit 1102 cam Performer intake and carb. Finally in about 1 piece in the yard. Last edited by Bob D; 03-14-2007 at 10:13 PM.

03-14-2007, 11:12 PM	#5
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Pic Request - TH350 linkage - column to tranny Thanks Bob D ... I was hoping for an original type linkage if anyone has one that is available for pics. I have purchased a Lokar linkage kit and by rough measuring and "eyeballing" it looks to be short. I don't want to open it up and assemble to find out it's too short. It came in a shrink-wrap/laminated type package and if it's open they won't take it back. I wanted to see a pic to see if the linkage has any curves made into it or is it a straight piece and the measurement on the linkage will tell me if the Lokar linkage kit will work. Thanks!

03-15-2007, 07:32 PM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Pic Request - TH350 linkage - column to tranny I did not know if you have a 2wd or a 4wd so I took a picture of both and measured them from pivot to pivot. (Of course the upper pivot is adjustable). Measurements were made to the middle of the adjustment diameter on the upper end. The 4x4 measures 22 1/2" and has curves. The 2wd measures 20 1/2" and is almost straight. Jim Attached Images __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

03-15-2007, 07:56 PM	#7
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Pic Request - TH350 linkage - column to tranny Thank You ... Thank You ... Thank You JimK! I owe you BIG time!

03-16-2007, 05:32 AM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Pic Request - TH350 linkage - column to tranny You are welcome! Good luck on your project. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

03-16-2007, 09:44 AM	#9
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Pic Request - TH350 linkage - column to tranny I have the Lokar kit Shane - it worked. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

03-16-2007, 04:26 PM	#10
71Chev Senior Member Join Date: Dec 2000 Location: Indiana Posts: 3,074	Re: Pic Request - TH350 linkage - column to tranny Shane this may help. http://67-72chevytrucks.com/vboard/s...ad.php?t=95438 __________________ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear.

03-16-2007, 07:03 PM	#11
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Pic Request - TH350 linkage - column to tranny Thanks guys ... much appreciated!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.