71/72 Plastic Door Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WORNBRAKES · 03-18-2007, 02:41 PM

Black set- 35.00 + shipping SOLD
Someone glued some cloth over them. I removed the cloth but there is still some glue on it. Should clean up real nice. Fresh paint whith the chrome trim. They will look good. I should keep them. lol

Blue set- 35.00 + shipping SOLD
Common scratches.
Neither are cracked.

Pm's Ignored Untill A Deal Is Made
Paypal, Cash Or M/o
All Items Are Driver Quality.
Shipping will be DHL Ground.

Yell'r69 · 03-18-2007, 03:27 PM

Hi, I'm new. Do these fit a '69? And how about the arm rest, will my stock ones work with these panels? I'm in Bedford. I need black.

Yell'r69 · 03-18-2007, 03:34 PM

Hey Worn, I looked at mine again and the armrests wont fit. Have you tried to get that glue off?

jcfoote60 · 03-18-2007, 06:20 PM

Those fit 1972 only unless you install the window regulator assemblies from a 72 and install them in a 67-71 door shell. The 72's have longer shafts to make up for the thickness of the plastic panel. FYI

WORNBRAKES · 03-19-2007, 10:40 AM

I have not messed with them other than nocking the dust off.
Thanks, jc for the info in the regulators. I had no idea, I have always liked and used the metal door panels.

**jaros44sr** · 03-19-2007, 07:04 PM

Hey worn brakes, could you try and take off the glue with a chemical. Let me know how it works out, I may be interested if it comes off. Just try a small spot. J.

WORNBRAKES · 03-19-2007, 09:30 PM

At work now. I will try some thinner or something in the am.

**jaros44sr** · 03-20-2007, 06:00 AM

Thanks,LMK. J.

meathead95 · 03-20-2007, 08:19 AM

it should rub right off with some bumper sticker remover

WORNBRAKES · 03-20-2007, 01:24 PM

I took a stab at removing the dried glue. I did it where the armrest would cover it.
On the side toward the edge of the panel, I used GOO GONE (sticker remover). Scrubed a little with scotch brite and then whiped off. It worked well.

Toward the middle of the panel I used Mineral Spirit and it worked well also.

I would recomend the GOO GONE and the thinner may dry out the plastic.

Please let me know what you would like to do.

Thanks

brak · 03-20-2007, 01:48 PM

if he doesn't take the Black set, put me next in line.

let me know the shipping to 55438

mr.wilson · 03-20-2007, 06:30 PM

I will take the blue. I am in the DFW are also.

WORNBRAKES · 03-20-2007, 08:10 PM

ok brak, you are next

Mr wilson, I am just 15 miles SE of you on 30. Would you like to pick them up?

**jaros44sr** · 03-20-2007, 09:28 PM

I'll take them worn, pls. give me a shipping quote to 19454

WORNBRAKES · 03-20-2007, 11:38 PM

Jaros. shipping is DHL ground 11.00 + 35.00 part = 46.00 total
You should have my address?
Thanks

**jaros44sr** · 03-21-2007, 06:54 AM

Quote:

Originally Posted by WORNBRAKES

Jaros. shipping is DHL ground 11.00 + 35.00 part = 46.00 total
You should have my address?
Thanks

Yes I do, I'll get the cash off to you. J.

mr.wilson · 03-22-2007, 01:24 PM

Quote:

Originally Posted by WORNBRAKES

ok brak, you are next

Mr wilson, I am just 15 miles SE of you on 30. Would you like to pick them up?

Yes I would. 214-641-0396 cell

Mike

03-18-2007, 02:41 PM	#1
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	72 Plastic Door Panels Black set- 35.00 + shipping SOLD Someone glued some cloth over them. I removed the cloth but there is still some glue on it. Should clean up real nice. Fresh paint whith the chrome trim. They will look good. I should keep them. lol Blue set- 35.00 + shipping SOLD Common scratches. Neither are cracked. Pm's Ignored Untill A Deal Is Made Paypal, Cash Or M/o All Items Are Driver Quality. Shipping will be DHL Ground. Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins Last edited by WORNBRAKES; 04-06-2007 at 02:33 PM. Reason: fix

03-18-2007, 03:27 PM	#2
Yell'r69 Registered User Join Date: Feb 2007 Location: Willoughby, OH Posts: 90	Re: 71/72 Plastic Door Panels Hi, I'm new. Do these fit a '69? And how about the arm rest, will my stock ones work with these panels? I'm in Bedford. I need black. __________________ '72 Blazer 4X4 '69 GMC LWB 350/TH350 2WD (SOLD) '89 Mustang 5.0 LX Ragtop '02 Jeep Liberty 4X4 - Wife's '00 Taurus Wagon - gets me to work and hauls a load of crap Last edited by Yell'r69; 03-18-2007 at 03:29 PM. Reason: color

03-18-2007, 03:34 PM	#3
Yell'r69 Registered User Join Date: Feb 2007 Location: Willoughby, OH Posts: 90	Re: 71/72 Plastic Door Panels Hey Worn, I looked at mine again and the armrests wont fit. Have you tried to get that glue off? __________________ '72 Blazer 4X4 '69 GMC LWB 350/TH350 2WD (SOLD) '89 Mustang 5.0 LX Ragtop '02 Jeep Liberty 4X4 - Wife's '00 Taurus Wagon - gets me to work and hauls a load of crap

03-18-2007, 06:20 PM	#4
jcfoote60 Active Member Join Date: Jun 2005 Location: Idaho Posts: 263	Re: 71/72 Plastic Door Panels Those fit 1972 only unless you install the window regulator assemblies from a 72 and install them in a 67-71 door shell. The 72's have longer shafts to make up for the thickness of the plastic panel. FYI

03-19-2007, 10:40 AM	#5
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 71/72 Plastic Door Panels I have not messed with them other than nocking the dust off. Thanks, jc for the info in the regulators. I had no idea, I have always liked and used the metal door panels. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

03-19-2007, 07:04 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: 71/72 Plastic Door Panels Hey worn brakes, could you try and take off the glue with a chemical. Let me know how it works out, I may be interested if it comes off. Just try a small spot. J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-19-2007, 09:30 PM	#7
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 71/72 Plastic Door Panels At work now. I will try some thinner or something in the am. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

03-20-2007, 06:00 AM	#8
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: 71/72 Plastic Door Panels Thanks,LMK. J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-20-2007, 08:19 AM	#9
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: 71/72 Plastic Door Panels it should rub right off with some bumper sticker remover __________________ 72 2wd blazer 72 swb 4x4

03-20-2007, 01:24 PM	#10
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 71/72 Plastic Door Panels I took a stab at removing the dried glue. I did it where the armrest would cover it. On the side toward the edge of the panel, I used GOO GONE (sticker remover). Scrubed a little with scotch brite and then whiped off. It worked well. Toward the middle of the panel I used Mineral Spirit and it worked well also. I would recomend the GOO GONE and the thinner may dry out the plastic. Please let me know what you would like to do. Thanks Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

03-20-2007, 01:48 PM	#11
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: 71/72 Plastic Door Panels if he doesn't take the Black set, put me next in line. let me know the shipping to 55438 __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

03-20-2007, 06:30 PM	#12
mr.wilson Registered User Join Date: Apr 2005 Location: Allen,TX Posts: 115	Re: 71/72 Plastic Door Panels I will take the blue. I am in the DFW are also. __________________ Wilson 1972 Cheyenne LWB, 350ci TH-350. Restoration in progress.

03-20-2007, 08:10 PM	#13
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 71/72 Plastic Door Panels ok brak, you are next Mr wilson, I am just 15 miles SE of you on 30. Would you like to pick them up? __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins Last edited by WORNBRAKES; 03-20-2007 at 08:11 PM.

03-20-2007, 09:28 PM	#14
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: 71/72 Plastic Door Panels I'll take them worn, pls. give me a shipping quote to 19454 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-20-2007, 11:38 PM	#15
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 71/72 Plastic Door Panels Jaros. shipping is DHL ground 11.00 + 35.00 part = 46.00 total You should have my address? Thanks __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.