?Question on a few parts?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RACINJASON22 · 03-26-2007, 11:21 AM

I recived these two pieces with my 72 4x4. Truck came factory with a 350 SBC but I also recived BBC parts with it. I was wondering if they are stock parts to our years of trucks. I know what they are just wondering about application. Any ideas or does any one know what the top two nuts on the bell housing plate are for? Part # is on the overflow resivoir. Any input will be greatly appreciated. Thanks. RJ22

**Palf70Step** · 03-26-2007, 12:43 PM

Top picture looks like an adapter to fit BOP T350/T400 tranny to a Chevy Block (or vice versa).

RACINJASON22 · 03-26-2007, 01:03 PM

Deos not seem to be an adapter as holes are just through holes. (Spacer) It seems to be a plate to to mount a strait in mount starter which I got to. Just not sure if this would have come on the truck factory I never seen one before. RJ22

RACINJASON22 · 03-26-2007, 02:11 PM

lots of ya here right now so ttt anyone?? RJ22

Tman · 03-26-2007, 03:25 PM

I agree that the adapter is for a BOP trans on a chevy block, the nuts on the top would be where the top two bolts for the BOP trans mounts. Also, you could mount the manual trans type starter to the auto trans without holes in the block as usual. Now the res. I'm not to sure about, but I think I remember something like that on the big trucks, c-50,c-60?? Anyone else......

Longhorn Man · 03-26-2007, 04:54 PM

the surge tank is off a bigger truck, theyrun it well into the late 70's and probably into the 80's... I don't think it came on the 67 - 72 trucks at all.

RACINJASON22 · 03-26-2007, 09:04 PM

Thanks guys I had never ran across either of these two before and I have stipped a good many cars and trucks. I should have figured the trans adapter out on my own and, I didn't even put it together when Palf70Step told me what it was

. The tank being off of one of the bigger models would be why. I knew you guys would know. Hope I can be of help in return someday. Thank You RJ22

03-26-2007, 11:21 AM	#1
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	?Question on a few parts?? I recived these two pieces with my 72 4x4. Truck came factory with a 350 SBC but I also recived BBC parts with it. I was wondering if they are stock parts to our years of trucks. I know what they are just wondering about application. Any ideas or does any one know what the top two nuts on the bell housing plate are for? Part # is on the overflow resivoir. Any input will be greatly appreciated. Thanks. RJ22 Attached Images __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

03-26-2007, 12:43 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: ?Question on a few parts?? Top picture looks like an adapter to fit BOP T350/T400 tranny to a Chevy Block (or vice versa). __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-26-2007, 01:03 PM	#3
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: ?Question on a few parts?? Deos not seem to be an adapter as holes are just through holes. (Spacer) It seems to be a plate to to mount a strait in mount starter which I got to. Just not sure if this would have come on the truck factory I never seen one before. RJ22 __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

03-26-2007, 02:11 PM	#4
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: ?Question on a few parts?? lots of ya here right now so ttt anyone?? RJ22 __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

03-26-2007, 03:25 PM	#5
Tman Registered User Join Date: Mar 2006 Location: Reynolds, ND Posts: 78	Re: ?Question on a few parts?? I agree that the adapter is for a BOP trans on a chevy block, the nuts on the top would be where the top two bolts for the BOP trans mounts. Also, you could mount the manual trans type starter to the auto trans without holes in the block as usual. Now the res. I'm not to sure about, but I think I remember something like that on the big trucks, c-50,c-60?? Anyone else......

03-26-2007, 04:54 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: ?Question on a few parts?? the surge tank is off a bigger truck, theyrun it well into the late 70's and probably into the 80's... I don't think it came on the 67 - 72 trucks at all.

03-26-2007, 09:04 PM	#7
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: ?Question on a few parts?? Thanks guys I had never ran across either of these two before and I have stipped a good many cars and trucks. I should have figured the trans adapter out on my own and, I didn't even put it together when Palf70Step told me what it was . The tank being off of one of the bigger models would be why. I knew you guys would know. Hope I can be of help in return someday. Thank You RJ22 __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.