vapor/fuel return line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superman3405 · 03-31-2007, 10:32 PM

Hello all I am new to the site. I was wondering if you could help me. I have a 1972 Chevy and I am doing a motor swap. My question is my old motor's fuel pump had an intake and a fuel\vapor return, would I hurt anything if I clamped off the vapor retun hose and just had the main fuel line? My new motor only has 1 inlet for the main hose.

Thanks
Don

cabinetguy · 03-31-2007, 10:34 PM

Clamp it! or you can buy one without

03-31-2007, 10:32 PM	#1
superman3405 Junior Member Join Date: Mar 2007 Location: Tennessee Posts: 80	vapor/fuel return line Hello all I am new to the site. I was wondering if you could help me. I have a 1972 Chevy and I am doing a motor swap. My question is my old motor's fuel pump had an intake and a fuel\vapor return, would I hurt anything if I clamped off the vapor retun hose and just had the main fuel line? My new motor only has 1 inlet for the main hose. Thanks Don

03-31-2007, 10:34 PM	#2
cabinetguy 67 shorty Join Date: Feb 2007 Location: Graham,Wa. Posts: 190	Re: vapor/fuel return line Clamp it! or you can buy one without __________________ 67 SWB with enough parts to build two

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.