Wheel tubs for stepside??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69c10step · 04-08-2007, 10:58 PM

New here, seems to be a great forum. My first of probably many questions to come, does anybody make a wheel tub that installs on the inside of a stepside bed? Can a reproduction wheel tub from a fleetside be installed? Would prefer fiberglass, but steel would work. Trying to fit some wider tires under the back - figured a bolt in would be easier than trying to fabricate something.

Thanks for any suggestions and/or pics.

Tom

cooters · 04-08-2007, 11:09 PM

i have never seen tubs specifically made for our trucks, would love to see them made but they are real easy to make for the stepside

centsless · 04-08-2007, 11:12 PM

I dont have an answer for you. The fleetside tubs could be made to bolt in, though. Welcome to the board from Harford County!!

**special-K** · 04-09-2007, 08:44 AM

They aren`t ready-made.I`ve seen Fleetside wheel houses used.They should be narrowed,though.There`s no need to tub these trucks unless you`re narrowing the rear/back-1/2ing the frame.Wentz Motor Company in Danville,VA. makes fiberglass stuff like that.They set up at Carlisle.

04-08-2007, 10:58 PM	#1
69c10step Registered User Join Date: Mar 2007 Location: Carroll County, MD Posts: 165	Wheel tubs for stepside??? New here, seems to be a great forum. My first of probably many questions to come, does anybody make a wheel tub that installs on the inside of a stepside bed? Can a reproduction wheel tub from a fleetside be installed? Would prefer fiberglass, but steel would work. Trying to fit some wider tires under the back - figured a bolt in would be easier than trying to fabricate something. Thanks for any suggestions and/or pics. Tom

04-08-2007, 11:09 PM	#2
cooters Senior Member Join Date: Oct 2006 Location: Edmonton Alberta Posts: 458	Re: Wheel tubs for stepside??? i have never seen tubs specifically made for our trucks, would love to see them made but they are real easy to make for the stepside Last edited by cooters; 04-08-2007 at 11:09 PM.

04-08-2007, 11:12 PM	#3
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Wheel tubs for stepside??? I dont have an answer for you. The fleetside tubs could be made to bolt in, though. Welcome to the board from Harford County!! __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

04-09-2007, 08:44 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Wheel tubs for stepside??? They aren`t ready-made.I`ve seen Fleetside wheel houses used.They should be narrowed,though.There`s no need to tub these trucks unless you`re narrowing the rear/back-1/2ing the frame.Wentz Motor Company in Danville,VA. makes fiberglass stuff like that.They set up at Carlisle. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.