|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-16-2007, 11:08 AM
|
#1 |
|
Alright Alright Alright
Join Date: Mar 2004
Location: Midland, Texas
Posts: 1,672
|
play in the rear axles
i was putting on a set of new tires on yesterday and noticed when i got one of my wheels off, the axles had just a little bit of back and forth play (pushing it in and out, not side to side. is this normal? it is on an 8.5 10 bolt with a 3.73 posi.
__________________
1972 Cheyenne Chevrolet red and white 357ci, Vortec heads, GM Performance high rise intake, Comp 268H .454/.454 218/218 110 LSA Quadrajet carb, Flowtech headers, 2.25 40 series HEI, Curve kit, TH 350, 3.07 gears 275/60/15s on 15x8 rallies |
|
|
|
04-16-2007, 12:34 PM
|
#2 |
|
GEARHEAD
Join Date: Jan 2007
Location: CENTRAL,PA
Posts: 2,284
|
Re: play in the rear axles
Going by what I have experienced there is a little in and out movement. From how the C-Clip installs on the inside of the axle.
IIRC it should only be very minor (MEMORY) No more than a 1/16th to 1/8th of and inch or so, Not much more. Someone else might have a more exact measurement for ya. Side to side which you stated you do not have would be a bigger problem leaning toward axle bearing faliure. I would say your fine as long as there no major movement.
__________________
72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR! 
Last edited by RACINJASON22; 04-16-2007 at 12:34 PM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
