Who had the LED Taillights? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 06-27-2007, 06:12 PM

I found some LED taillights for a 60-66 truck w/stainless housing for I think 35.00 each, but I can't seem to find the link. Does anyone know who it was?
Shawn

sdkid · 06-28-2007, 12:17 AM

How about "musclerodz" . I'm pretty sure that he has them, not sure about the price though.

Musclerodz · 06-28-2007, 01:05 PM

Here is the link to our step side LED's with housings. They are $36 with black housing and $41 with stainless housing each. http://musclerodzstore.com/index.asp...PROD&ProdID=79
Mike

jorgensensc · 06-28-2007, 01:41 PM

That's what I was looking for. Do you have the stainless brackets for the 67-72 lights? They fit these lights great!
Shawn

Musclerodz · 06-28-2007, 04:35 PM

Quote:

Originally Posted by jorgensensc

That's what I was looking for. Do you have the stainless brackets for the 67-72 lights? They fit these lights great!
Shawn

I don't think they make stainless brackets but I will look into it.

Mike

jorgensensc · 07-04-2007, 12:54 PM

Any word on the bracket? I think I could do plain black also. Looking to order today.

Shawn

'68 longbed · 07-04-2007, 01:16 PM

stainless brackets exist, wish I could remember where I saw them but they do exist. wish i could help more!

'68 longbed · 07-04-2007, 01:21 PM

I just checked the musclerodz site, good stuff.....another store that will make the landlord mad at me for not paying the rent on time!!! lol

Musclerodz · 07-04-2007, 03:33 PM

Quote:

Originally Posted by jorgensensc

Any word on the bracket? I think I could do plain black also. Looking to order today.

Shawn

Painted steel brackets are available. I don;t have them available but can get them locally and would just pass on what i paid for them if you are ordering something from my site.

Mike

jorgensensc · 07-04-2007, 04:15 PM

Sounds good. I know I saw the stainless ones last weekend at a local Vendor (about 10 bucks each), but wanted to get the LED lights also and he was a bit high on his prices (considerably) on the LEDs. PM me with the price of the brackets and how to buy them from your sight when I order the lights. Thanks!
Shawn

Musclerodz · 07-04-2007, 06:01 PM

Quote:

Originally Posted by jorgensensc

Sounds good. I know I saw the stainless ones last weekend at a local Vendor (about 10 bucks each), but wanted to get the LED lights also and he was a bit high on his prices (considerably) on the LEDs. PM me with the price of the brackets and how to buy them from your sight when I order the lights. Thanks!
Shawn

Tail Light brackets are $10 each for steel. 60-66 step LED's with stainless buckets are $82 for the pair, add $10 for shipping for a total of $102. You can Paypal to sales@musclerodz.com. Let me know if you want clear or red lense LEDS.

Mike

jorgensensc · 07-04-2007, 10:05 PM

I sent you Paypal. I would like the red lenses please with eth painted steel brackets. Thanks you very much!!!
Shawn

jorgensensc · 07-04-2007, 10:06 PM

Also, do I have to get a special flasher to make them work correctly? Can I pick that up at the local parts store?

krue · 07-04-2007, 10:12 PM

Post pics when you get them installed.

LUV2XCLR8 · 07-04-2007, 10:38 PM

Musclerodz · 07-05-2007, 01:13 PM

Quote:

Originally Posted by jorgensensc

Also, do I have to get a special flasher to make them work correctly? Can I pick that up at the local parts store?

No flasher required if you are not running any other led's

Mike

LUV2XCLR8 · 07-05-2007, 02:19 PM

Quote:

Originally Posted by Musclerodz

No flasher required if you are not running any other led's

Mike

Mike,

What if you are?

I'm going 2 run LED's
In my sidemarkers. Is
It going 2 be a issue?

Musclerodz · 07-05-2007, 03:08 PM

Quote:

Originally Posted by LUV2XCLR8

Mike,

What if you are?

I'm going 2 run LED's
In my sidemarkers. Is
It going 2 be a issue?

If you got LED side markers, I would receommend getting no load flashers. You will need two, one for hazard and one for turn. Who has led side markers?

Mike

06-27-2007, 06:12 PM	#1
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Who had the LED Taillights? I found some LED taillights for a 60-66 truck w/stainless housing for I think 35.00 each, but I can't seem to find the link. Does anyone know who it was? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

06-28-2007, 12:17 AM	#2
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: Who had the LED Taillights? How about "musclerodz" . I'm pretty sure that he has them, not sure about the price though. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

06-28-2007, 01:05 PM	#3
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: Who had the LED Taillights? Here is the link to our step side LED's with housings. They are $36 with black housing and $41 with stainless housing each. http://musclerodzstore.com/index.asp...PROD&ProdID=79 Mike __________________ Mike Redpath Last edited by Musclerodz; 06-28-2007 at 01:06 PM.

06-28-2007, 01:41 PM	#4
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Who had the LED Taillights? That's what I was looking for. Do you have the stainless brackets for the 67-72 lights? They fit these lights great! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-04-2007, 12:54 PM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Who had the LED Taillights? Any word on the bracket? I think I could do plain black also. Looking to order today. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-04-2007, 01:16 PM	#7
'68 longbed Registered User Join Date: Jun 2007 Location: mississippi Posts: 181	Re: Who had the LED Taillights? stainless brackets exist, wish I could remember where I saw them but they do exist. wish i could help more!

07-04-2007, 01:21 PM	#8
'68 longbed Registered User Join Date: Jun 2007 Location: mississippi Posts: 181	Re: Who had the LED Taillights? I just checked the musclerodz site, good stuff.....another store that will make the landlord mad at me for not paying the rent on time!!! lol

07-04-2007, 04:15 PM	#10
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Who had the LED Taillights? Sounds good. I know I saw the stainless ones last weekend at a local Vendor (about 10 bucks each), but wanted to get the LED lights also and he was a bit high on his prices (considerably) on the LEDs. PM me with the price of the brackets and how to buy them from your sight when I order the lights. Thanks! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-04-2007, 10:05 PM	#12
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Who had the LED Taillights? I sent you Paypal. I would like the red lenses please with eth painted steel brackets. Thanks you very much!!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-04-2007, 10:06 PM	#13
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Who had the LED Taillights? Also, do I have to get a special flasher to make them work correctly? Can I pick that up at the local parts store? __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-04-2007, 10:12 PM	#14
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Who had the LED Taillights? Post pics when you get them installed. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-04-2007, 10:38 PM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Who had the LED Taillights? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.