surface rust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rickey · 07-01-2007, 09:31 PM

I lifted my carpet today and there is surface rust in the floorboard. What would be the best to treat this before it becomes a big problem.

thanks rickey

Sport/Truck · 07-01-2007, 09:37 PM

Rust bullet.

s/t

David Flores · 07-01-2007, 09:44 PM

Naval jelly works wonders if done right.

Sport/Truck · 07-01-2007, 09:49 PM

Quote:

Originally Posted by David Flores

Naval jelly works wonders if done right.

That’s debatable, most people here will disagree with the use of naval jelly (and it does nothing for keeping the rust from coming back).

s/t

Rickey · 07-01-2007, 10:03 PM

Should I sandblast the area and prime the area. I just want to stay on top of it before I have to replace the floor.

Sport/Truck · 07-01-2007, 10:07 PM

When using RB you just need to scuff the area to remove anything that is loose, then brush it on. It’s that easy.
s/t

Rickey · 07-01-2007, 10:32 PM

Where do you get RB. thanks for the tip.

Sport/Truck · 07-02-2007, 09:10 PM

here you go Rust Bullet

s/t

killer71 · 07-02-2007, 10:04 PM

this is what i've used in the past many times. It's simple to apply and as an added bonus it WORKS. You can get it at any hardware store. The only color i've used is the black. Hope this helps. http://www.rustoleum.com/CBGProduct.asp?pid=159

Rickey · 07-02-2007, 10:05 PM

Thanks for your help.

07-01-2007, 09:31 PM	#1
Rickey Registered User Join Date: Jun 2007 Location: Kaufman TX Posts: 160	surface rust I lifted my carpet today and there is surface rust in the floorboard. What would be the best to treat this before it becomes a big problem. thanks rickey

07-01-2007, 09:37 PM	#2
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: surface rust Rust bullet. s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

07-01-2007, 09:44 PM	#3
David Flores Registered User Join Date: May 2007 Location: Temple Texas Posts: 399	Re: surface rust Naval jelly works wonders if done right. __________________ 66 c10 swbfs My Build.

07-01-2007, 10:03 PM	#5
Rickey Registered User Join Date: Jun 2007 Location: Kaufman TX Posts: 160	Re: surface rust Should I sandblast the area and prime the area. I just want to stay on top of it before I have to replace the floor.

07-01-2007, 10:07 PM	#6
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: surface rust When using RB you just need to scuff the area to remove anything that is loose, then brush it on. It’s that easy. s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

07-01-2007, 10:32 PM	#7
Rickey Registered User Join Date: Jun 2007 Location: Kaufman TX Posts: 160	Re: surface rust Where do you get RB. thanks for the tip.

07-02-2007, 09:10 PM	#8
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: surface rust here you go Rust Bullet s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

07-02-2007, 10:04 PM	#9
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: surface rust this is what i've used in the past many times. It's simple to apply and as an added bonus it WORKS. You can get it at any hardware store. The only color i've used is the black. Hope this helps. http://www.rustoleum.com/CBGProduct.asp?pid=159 __________________ R.I.P. Killer 71 10/26/07

07-02-2007, 10:05 PM	#10
Rickey Registered User Join Date: Jun 2007 Location: Kaufman TX Posts: 160	Re: surface rust Thanks for your help.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.