poly sway bar bushings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10N.UT · 12-14-2002, 02:39 PM

hi

I was wondering what poly swaybar bushing ppl are running.I got a 3/4 ton front bar off the local salvageyard the other day.Its a 1 /14" bar,and going thru the nearby autozones' and checkers have netted only the energy suspension bushiings that say not for use on fullsize trucks.

78SilveradoSWB · 12-14-2002, 03:24 PM

C10n.UT, I got a used 3/4 ton front bar recently via Ebay, and refurbished it with black Hammerlite paint and got some Energy Suspension bushings with grease fittings. After reading the instructions it said not for full size trucks or Mustangs.

They look like they'll fit, anyone out there has any further input?

pkbinplano · 12-14-2002, 04:21 PM

I put an 1 1/4 sway bar on mine with Moog bushings. Worked like a champ. Non greasable . Truck drives great. Do a search. I posted part numbers.

pkbinplano · 12-14-2002, 04:23 PM

http://67-72chevytrucks.com/vboard/s...light=sway+bar

Go here oops no p/n's For a 1 1/4 sway bar takes two sets of Moog bushings p/n k6476. They come 2 per set.

**swervin ervin** · 12-14-2002, 09:42 PM

The part number for Energy Suspension anti-sway bar bushings for a 1-1/4" bar is 3-5177G. These are the black ones which are graphite impregnated. The two which fasten to the frame will have zerk fittings so you can grease them if you ever need to.

The red ones, which don't have graphite, is 3-5177R, and have zerk fittings too.

The ones you are talking about are the universal bushings and won't work on our trucks.

C10N.UT · 12-15-2002, 03:40 AM

Thanks guys....

Swervin: do you buy chance have the p/n for the bushing kits on the endlink side?(the lower control arm by chance?)

PKinPlano:Ill have to check them numbers out when i get to work monday and see what i can get those for at my dealer cost!The aftermarket parts shop we go thru carries alot of moog

Thanks for all the help!!

This board rocks!

78SilveradoSWB · 12-15-2002, 04:32 AM

I think they are the same ones 3-5177G or 3-5177R that go on the A-arms and the swaybar bracket.

pkbinplano · 12-15-2002, 11:09 AM

I think they are only about 15 beans a pair

**swervin ervin** · 12-15-2002, 01:03 PM

The part number above are for four bushings, complete with brackets. The two on the frame will have zerk fittings, the two on the lower control arm don't. They will be like this photo, except for a 1-1/4" bar.

C10N.UT · 12-15-2002, 01:48 PM

awesome

Thanks again guys!!

Like is said before.....

This board Rocks!

J-Spec C10 · 12-16-2002, 02:47 AM

Wow! that swaybar looks alright, I better see if I can find one. What is the biggest factory replacement one available? Anyone know?

79BIG10 · 12-16-2002, 05:20 AM

I think 1 1/4 is the biggest.

12-14-2002, 02:39 PM	#1
C10N.UT Registered User Join Date: Oct 2001 Location: Ogden Utah Posts: 64	poly sway bar bushings? hi I was wondering what poly swaybar bushing ppl are running.I got a 3/4 ton front bar off the local salvageyard the other day.Its a 1 /14" bar,and going thru the nearby autozones' and checkers have netted only the energy suspension bushiings that say not for use on fullsize trucks.

12-14-2002, 04:21 PM	#3
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	I put an 1 1/4 sway bar on mine with Moog bushings. Worked like a champ. Non greasable . Truck drives great. Do a search. I posted part numbers. __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

12-14-2002, 04:23 PM	#4
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	http://67-72chevytrucks.com/vboard/s...light=sway+bar Go here oops no p/n's For a 1 1/4 sway bar takes two sets of Moog bushings p/n k6476. They come 2 per set. __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat Last edited by pkbinplano; 12-14-2002 at 04:26 PM.

12-14-2002, 09:42 PM	#5
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	The part number for Energy Suspension anti-sway bar bushings for a 1-1/4" bar is 3-5177G. These are the black ones which are graphite impregnated. The two which fasten to the frame will have zerk fittings so you can grease them if you ever need to. The red ones, which don't have graphite, is 3-5177R, and have zerk fittings too. The ones you are talking about are the universal bushings and won't work on our trucks. __________________ Mike 1985 Chevy C-10

12-15-2002, 11:09 AM	#8
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	I think they are only about 15 beans a pair __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

12-14-2002, 03:24 PM	#2
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	C10n.UT, I got a used 3/4 ton front bar recently via Ebay, and refurbished it with black Hammerlite paint and got some Energy Suspension bushings with grease fittings. After reading the instructions it said not for full size trucks or Mustangs. They look like they'll fit, anyone out there has any further input?

12-15-2002, 03:40 AM	#6
C10N.UT Registered User Join Date: Oct 2001 Location: Ogden Utah Posts: 64	Thanks guys.... Swervin: do you buy chance have the p/n for the bushing kits on the endlink side?(the lower control arm by chance?) PKinPlano:Ill have to check them numbers out when i get to work monday and see what i can get those for at my dealer cost!The aftermarket parts shop we go thru carries alot of moog Thanks for all the help!! This board rocks!

12-15-2002, 04:32 AM	#7
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	I think they are the same ones 3-5177G or 3-5177R that go on the A-arms and the swaybar bracket.

12-15-2002, 01:03 PM	#9
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	The part number above are for four bushings, complete with brackets. The two on the frame will have zerk fittings, the two on the lower control arm don't. They will be like this photo, except for a 1-1/4" bar. __________________ Mike 1985 Chevy C-10

12-15-2002, 01:48 PM	#10
C10N.UT Registered User Join Date: Oct 2001 Location: Ogden Utah Posts: 64	awesome Thanks again guys!! Like is said before..... This board Rocks!

12-16-2002, 02:47 AM	#11
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	Wow! that swaybar looks alright, I better see if I can find one. What is the biggest factory replacement one available? Anyone know? __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

12-16-2002, 05:20 AM	#12
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	I think 1 1/4 is the biggest. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.