![]() |
![]() |
#1 |
Registered User
![]() Join Date: May 2007
Location: St. Louis
Posts: 110
|
Progress on my 66
thought i would post some pics of my progress on my 66. any advice or suggestions are welcome. Also i have a queston above the last pic.
2 weeks ago: ![]() By coxja000 sandblasted and 2 coats of PM industries sealer/primer: ![]() By coxja000 3 coats of satin black top coat: ![]() By coxja000 question: i replaced the rubber seals on the upper control arms and they are very loose. they dont stay in place. are they bad seals(or wrong ones) or am i doing something wrong? also there is a space between the seal and the bar that attaches the control arm to the frame. is this right or am i missing something? ( there wasnt anything there when i removed them. i dont think ![]() ![]() By coxja000 thanks
__________________
1966 Chevy C-10 Fleetside Check out http://jcox.tumblr.com/ for progress updates! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2006
Location: nw ind
Posts: 23
|
Re: Progress on my 66
looks good did you do your own sandblasting
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: May 2007
Location: St. Louis
Posts: 110
|
Re: Progress on my 66
i had the frame and all the larger parts sandblasted. but i have a blast cabinet that i use for all the smaller parts.
__________________
1966 Chevy C-10 Fleetside Check out http://jcox.tumblr.com/ for progress updates! |
![]() |
![]() |
![]() |
#4 |
New Member
![]() Join Date: Mar 2007
Location: Houston,TX
Posts: 261
|
Re: Progress on my 66
Looking good
__________________
Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|