|
07-20-2007, 04:52 PM
|
#1 |
|
Registered User
Join Date: May 2007
Location: Las Vegas
Posts: 51
|
brake lines
hey guys i was mounting my electric fuel pump to the frame and hit the steel brake line that goes along the frame from the back to the master cylinder with the drill on accident and it has a hole in it. what is the easiest way to fix it? the rest of the line is fine no rust or anything just that one pinhole, can i get a line from the salvage yard and put it on or will it be impossible to make it fit, or buy a whole new line and bend a new one, or cut the bad piece out and put some unions and replace about 5 inches of the line?? thanks guys
|
|
|
|
07-20-2007, 09:32 PM
|
#2 | |
|
glamoros piece o' lowlife
Join Date: Mar 2007
Location: Redford, MI
Posts: 1,164
|
Re: brake lines
Quote:
__________________
The more I drink, the more I drink, the more I drink... diesel, reg cab, long bed, 4 across the rear, single stack, wooden stakes, and lotsa lights - the Hay Express |
|
|
|
|
|
07-22-2007, 01:28 PM
|
#3 |
|
Registered User
Join Date: May 2007
Location: Las Vegas
Posts: 51
|
Re: brake lines
thanks alot for the help i appreciate it
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
