The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-21-2007, 03:11 PM   #1
BabyBlue
The Peacemaker
 
BabyBlue's Avatar
 
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
Progress

My progress so far

















I'm currently deciding that I'm probably gonna have to run an electric fan from the looks of it.

Big Things left to do:

1. Figure out how to mount the BB radiator when there are no support holes in the radiator for its cover.

2. Bolt up the exhaust manifolds

3. Install all the vacuum and heater stuff on the intake, install the dizzy, and fasten down the carb.

4. Figure out what to do with the water pump, its pulley and the fan setup...this includes the figuring out how I'm gonna fasten the pulley on the pump. Usually I've noticed it's studs, but I tend to have horrible luck installing them.
__________________
1978 Chevy 2wd Stepside
aka "Audrey"
Cordova brown with mandarin guts
79k original miles & being restored

1979 Chevy 2wd Short Wide
aka "Emma-Jayne"
Cordova brown with mandarin guts

2019 Chevy Tahoe LT


Previous rides:
-2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB.
BabyBlue is offline   Reply With Quote
Old 07-21-2007, 07:41 PM   #2
boatpuller
Registered User
 
boatpuller's Avatar
 
Join Date: Sep 2005
Location: Sun City West, Az
Posts: 3,822
Re: Progress

sweet.............look's good.....that coming home to longview.
__________________
" Never look up a dead dogs butt."
boatpuller is offline   Reply With Quote
Old 07-21-2007, 10:12 PM   #3
bigblock79
67 Chevy Stepside
 
bigblock79's Avatar
 
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
Re: Progress

looking god to me
__________________
1967 Chevy stepside
1976 BIG DOOLEY 454 turbo 400 4:11
bigblock79 is offline   Reply With Quote
Old 07-21-2007, 11:14 PM   #4
knightlife
Dark Heart Motorsports
 
knightlife's Avatar
 
Join Date: Apr 2007
Location: 29404 DKFX
Posts: 683
Re: Progress

do a custom shroud like I did for my 83...it was the only way I could get the shroud to go back on after I put in a 19 inch 4 core radiator...just trim and solder to fit as needed...and if ya mess it up, shrouds are a dime a dozen at junkyards
__________________
How Deep Can YOU Bleed..?
1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter

2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD!
knightlife is offline   Reply With Quote
Old 07-22-2007, 12:37 AM   #5
Shaffer4
Strange Cousin From The West..
 
Join Date: Jul 2007
Location: Walla Walla, Wa
Posts: 248
Re: Progress

Quote:
Originally Posted by BabyBlue View Post
My progress so far

I'm currently deciding that I'm probably gonna have to run an electric fan from the looks of it.

Big Things left to do:

1. Figure out how to mount the BB radiator when there are no support holes in the radiator for its cover.

2. Bolt up the exhaust manifolds

3. Install all the vacuum and heater stuff on the intake, install the dizzy, and fasten down the carb.

4. Figure out what to do with the water pump, its pulley and the fan setup...this includes the figuring out how I'm gonna fasten the pulley on the pump. Usually I've noticed it's studs, but I tend to have horrible luck installing them.
The rad brackets usually just set over the Rad (u shaped cradles that set over the rad were the tanks clamp to the core.) and bolt to the Core Support. Then again that is in my '70 C-10... but the Core Support looks similar. I wound up using the Upper rad mount/cover out of the Donor car ('74 Caprice)


Last edited by Shaffer4; 07-22-2007 at 12:41 AM.
Shaffer4 is offline   Reply With Quote
Old 07-22-2007, 12:40 AM   #6
68GMC454
THE VILLIAGE IDIOT
 
68GMC454's Avatar
 
Join Date: Nov 2006
Location: Tooele, Utah
Posts: 1,405
Re: Progress

good looking engine...
__________________
honestly honey,,i have no idea how that truck got here.
68GMC454 is offline   Reply With Quote
Old 07-22-2007, 06:03 PM   #7
BabyBlue
The Peacemaker
 
BabyBlue's Avatar
 
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
Re: Progress

Quote:
Originally Posted by boatpuller View Post
sweet.............look's good.....that coming home to longview.
Yes, it actually came from longview. Sat on Ocean Beach Highway all the time. Was actually bought brand new when Ray Beachill was still around.

Quote:
Originally Posted by knightlife View Post
do a custom shroud like I did for my 83...it was the only way I could get the shroud to go back on after I put in a 19 inch 4 core radiator...just trim and solder to fit as needed...and if ya mess it up, shrouds are a dime a dozen at junkyards
Do you have any pics of your mount cause the picture looks like a stock chevy truck? Because my radiator is monstrous and was suppose to be a direct fit....phhhht. Would I see a lot of overheating problems if I stuck the old radiator back in?
__________________
1978 Chevy 2wd Stepside
aka "Audrey"
Cordova brown with mandarin guts
79k original miles & being restored

1979 Chevy 2wd Short Wide
aka "Emma-Jayne"
Cordova brown with mandarin guts

2019 Chevy Tahoe LT


Previous rides:
-2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB.

Last edited by BabyBlue; 07-22-2007 at 06:05 PM.
BabyBlue is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com