how do i make fire fly from my tail pipes lol - The 1947 - Present Chevrolet & GMC Truck Message Board Network

retselgerg · 07-31-2007, 11:47 PM

as the name states is their a kit i can buy for this? or some hotrodders trick??

eedgell · 07-31-2007, 11:54 PM

Injection into the tail pipe with alcohol. Makes nice blue flames.

GMCMAX · 08-01-2007, 12:03 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=189088

Bus Ted Knuckle · 08-01-2007, 12:31 AM

weld a bung in your tailpipe for a spark plug. wire up a coil to the battery through a switch, run the coil wire to the spark plug. Rev the engine and just as let up on the gas pedal, hit the switch and watch the fun. Your exhaust is flammable due to unburned gas, etc. To put out the flame, punch the gas pedal again. It'll blow out.

To get a longer flame pipe in some propane.

Here is my disclamer:

Be careful with this stuff. Watch out for kids, small animals, and the elderly. And for goodness sakes, make sure you don't have any fuel leaks.

retselgerg · 08-01-2007, 12:44 AM

is there a safer way then flooding my engine?

David Flores · 08-01-2007, 12:51 AM

Oops, I thought I posted in this thread, but instead I brought back an old post.

They have a kit here:
BumpStop.com

Here is a video of it.
http://www.youtube.com/watch?v=kkPeJRiBSc0

MisterE72 · 08-01-2007, 01:29 AM

My dad's 69 galaxie500 use to do that. Though I don't think it was intentional.

GREASEMONKEY72 · 08-01-2007, 01:36 AM

http://www.youtube.com/watch?v=Zk2ix...elated&search=

you can do it with a couple lines from a propane tank the goes into the pipe behind the plugs so the exhaust pushes the gas over the spark plugs and just flick the switch for the plugs and youll have some good flames

MisterE72 · 08-01-2007, 01:43 AM

That clip is INSANE!! Are you sure you want flames like that anywhere near the truck you just spent who knows how much fixin' up?

**Yukon Jack** · 08-01-2007, 10:05 AM

Quote:

Originally Posted by GREASEMONKEY72

http://www.youtube.com/watch?v=Zk2ix...elated&search=

Very wild clip. While viewing it I saw this one of a hemi in a rat rod - sure sounds impressive http://www.youtube.com/watch?v=2Omj6zxtIB0 It's always fun to view the other clips that youtube shows when you watch one of their videos.

Premium72 · 08-01-2007, 12:47 PM

think about it...there is no safe way to do it. YOUR SHOOTING FLAMES FOR GODS SAKE...haha. its cool though had one on my 49 for a while.

flames would have been longer but i had some pretty big mufflers on it...

hyarbour · 08-01-2007, 03:47 PM

I don't know, they could come in handy if your pipes come out the side and there's some bone head revving his Harley with open pipes next to you.

bighead · 08-01-2007, 04:07 PM

I've got some Jalapenos that you could try, lol

GREASEMONKEY72 · 08-01-2007, 04:13 PM

Yukon Jack - yea ive seen that video before, deffinitly one nice and mean rod thats for sure

nothing wrong with doing flame throwers as long as youre not stupid when you use them, same as a burnout

07-31-2007, 11:47 PM	#1
retselgerg Registered User Join Date: Mar 2007 Location: Grundy Virginia Posts: 385	how do i make fire fly from my tail pipes lol as the name states is their a kit i can buy for this? or some hotrodders trick?? __________________ "OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno

07-31-2007, 11:54 PM	#2
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: how do i make fire fly from my tail pipes lol Injection into the tail pipe with alcohol. Makes nice blue flames. __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

08-01-2007, 12:03 AM	#3
GMCMAX Active Member Join Date: Jan 2006 Location: Lower Mid-East Ca. Posts: 326	Re: how do i make fire fly from my tail pipes lol http://67-72chevytrucks.com/vboard/s...d.php?t=189088 __________________ Never try to teach a pig to sing; it wastes your time and annoys the pig! Gets More Chicks My lugnuts require more torque than your honda makes! 68 GMC, 4X4 conversion w/73 k20 running gear and springs, 350 4spd, 4.10's, D44 powerlok front, 14BFF govlock rear, 33" tires, lifted 4".

08-01-2007, 12:31 AM	#4
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: how do i make fire fly from my tail pipes lol weld a bung in your tailpipe for a spark plug. wire up a coil to the battery through a switch, run the coil wire to the spark plug. Rev the engine and just as let up on the gas pedal, hit the switch and watch the fun. Your exhaust is flammable due to unburned gas, etc. To put out the flame, punch the gas pedal again. It'll blow out. To get a longer flame pipe in some propane. Here is my disclamer: Be careful with this stuff. Watch out for kids, small animals, and the elderly. And for goodness sakes, make sure you don't have any fuel leaks. __________________ Bill BEATERS ARE NEATER

08-01-2007, 12:44 AM	#5
retselgerg Registered User Join Date: Mar 2007 Location: Grundy Virginia Posts: 385	Re: how do i make fire fly from my tail pipes lol is there a safer way then flooding my engine? __________________ "OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno

08-01-2007, 12:51 AM	#6
David Flores Registered User Join Date: May 2007 Location: Temple Texas Posts: 399	Re: how do i make fire fly from my tail pipes lol Oops, I thought I posted in this thread, but instead I brought back an old post. They have a kit here: BumpStop.com Here is a video of it. http://www.youtube.com/watch?v=kkPeJRiBSc0 __________________ 66 c10 swbfs My Build.

08-01-2007, 01:29 AM	#7
MisterE72 Keep Your Nose Clean Join Date: Dec 2006 Location: California Posts: 496	Re: how do i make fire fly from my tail pipes lol My dad's 69 galaxie500 use to do that. Though I don't think it was intentional.

08-01-2007, 01:36 AM	#8
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: how do i make fire fly from my tail pipes lol http://www.youtube.com/watch?v=Zk2ix...elated&search= you can do it with a couple lines from a propane tank the goes into the pipe behind the plugs so the exhaust pushes the gas over the spark plugs and just flick the switch for the plugs and youll have some good flames __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

08-01-2007, 01:43 AM	#9
MisterE72 Keep Your Nose Clean Join Date: Dec 2006 Location: California Posts: 496	Re: how do i make fire fly from my tail pipes lol That clip is INSANE!! Are you sure you want flames like that anywhere near the truck you just spent who knows how much fixin' up?

08-01-2007, 12:47 PM	#11
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: how do i make fire fly from my tail pipes lol think about it...there is no safe way to do it. YOUR SHOOTING FLAMES FOR GODS SAKE...haha. its cool though had one on my 49 for a while. flames would have been longer but i had some pretty big mufflers on it...

08-01-2007, 03:47 PM	#12
hyarbour Registered User Join Date: Jan 2007 Location: Fairview, ks Posts: 203	Re: how do i make fire fly from my tail pipes lol I don't know, they could come in handy if your pipes come out the side and there's some bone head revving his Harley with open pipes next to you.

08-01-2007, 04:07 PM	#13
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: how do i make fire fly from my tail pipes lol I've got some Jalapenos that you could try, lol

08-01-2007, 04:13 PM	#14
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: how do i make fire fly from my tail pipes lol Yukon Jack - yea ive seen that video before, deffinitly one nice and mean rod thats for sure nothing wrong with doing flame throwers as long as youre not stupid when you use them, same as a burnout __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.