seat belt retactors???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BIG ORANGE** · 12-26-2002, 12:17 AM

Can anyone fix retractors that pull out but dont recoil back in the boot?

BUXMAN66 · 12-26-2002, 12:28 AM

is the retractor mounted to something solid?you can even get by w/ holding the retractor between your feet and giving a quick jerk.i had the same prob. w/mine but come to find out the retractor had to be firmly held(or mounted)and gave a sharp hard yank would release the locking mechanism.

JimKshortstep4x4 · 12-26-2002, 08:52 AM

I have been able to fix most of them. Usually it is the spring mechanism binding. You can take it apart and clean it, rewind the spring, and lube with a light lube, (I use Aero Kroil). Sometimes you need to work it a little bit and make sure that the plastic sleeve is not binding on the belt.

Jim

12-26-2002, 12:17 AM	#1
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	seat belt retactors???? Can anyone fix retractors that pull out but dont recoil back in the boot? __________________ Things happen for a reason!

12-26-2002, 12:28 AM	#2
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	is the retractor mounted to something solid?you can even get by w/ holding the retractor between your feet and giving a quick jerk.i had the same prob. w/mine but come to find out the retractor had to be firmly held(or mounted)and gave a sharp hard yank would release the locking mechanism. __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-26-2002, 08:52 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I have been able to fix most of them. Usually it is the spring mechanism binding. You can take it apart and clean it, rewind the spring, and lube with a light lube, (I use Aero Kroil). Sometimes you need to work it a little bit and make sure that the plastic sleeve is not binding on the belt. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.