Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-21-2007, 11:47 PM | #1 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Anyone have pics of 325/50-15s on the back
Im going from a 295/50-15 to a 325/50/15 and was wondering what they looked like. Thanks
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
09-22-2007, 06:38 PM | #2 |
Registered User
Join Date: Feb 2004
Location: Tacoma WA
Posts: 1,365
|
Re: Anyone have pics of 325/50-15s on the back
I have a pair of 315/50R15s on the rear. Mounted on 7 inch rallies. Sure wish they were at least 8's. I have no bed mounted so pics won't do much. It is very easy to take measurements however.
What brand are yours? Mine are "Big O" brand. Don't know if they are available or not. I got them at the junk yard for $10 each mounted on the rallies. Mine are 12 wide, tread 10, height 31 1/2. Yours?
__________________
67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow |
09-23-2007, 11:53 AM | #3 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
Im putting the Mickey Thompsons on. there about 28 X 13.50R15 on a 12 inch ralley
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
09-23-2007, 12:16 PM | #4 |
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Anyone have pics of 325/50-15s on the back
I use to run the 28x12.5 mickeys on my old 71 street truck. it was a wheel well full.
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
09-23-2007, 11:58 PM | #5 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
Any rubbing problems?
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
09-24-2007, 07:53 AM | #6 |
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Anyone have pics of 325/50-15s on the back
on a hard turn they would barely rub the stock inner fender!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
09-24-2007, 10:17 PM | #7 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
I got lots of offset on my custom ralleys. I have 295s now with no rubbing issues. 325s are just taller right?
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
09-24-2007, 10:24 PM | #8 |
Registered User
Join Date: Jun 2000
Location: Omaha NE 68122
Posts: 637
|
Re: Anyone have pics of 325/50-15s on the back
i would really like to see what a 325 look like on our trucks i have a 295 and it looks good but never thought about going bigger what is the widest you can run with out tubbing the rear
__________________
71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers |
09-24-2007, 10:41 PM | #9 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
Re: Anyone have pics of 325/50-15s on the back
A board member in Texas with a big block, orange and white longbed posted pics awhile back of 325/50 or 325/60/15's (can't remember his name). Tires were E.T. streets.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
09-25-2007, 09:44 PM | #10 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
Any one remember?? I have a week before I buy.
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
09-25-2007, 11:45 PM | #11 |
Registered User
Join Date: Apr 2007
Location: antreville, south carolina
Posts: 873
|
Re: Anyone have pics of 325/50-15s on the back
i dont but here ya go ttt
__________________
"Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster |
09-26-2007, 06:51 AM | #12 | |
Registered User
Join Date: Sep 2002
Location: DFW Texas
Posts: 2,269
|
Re: Anyone have pics of 325/50-15s on the back
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=231989 |
|
09-26-2007, 07:08 AM | #13 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
Re: Anyone have pics of 325/50-15s on the back
There it is . I was close considering this was posted 6 months ago
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
09-30-2007, 11:02 PM | #14 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
Ok got my new tires today. should get them mounted some time this week heres some pics
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
09-30-2007, 11:32 PM | #15 |
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Anyone have pics of 325/50-15s on the back
Sweet can't wait to see them mounted!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
10-01-2007, 07:20 AM | #16 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
Re: Anyone have pics of 325/50-15s on the back
Is your rear rim a 10" rim?. They look good!
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
10-01-2007, 08:43 AM | #17 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
Rim Has a extra 3" added to it
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
10-01-2007, 10:36 AM | #18 |
2WD Jimmy
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
|
Re: Anyone have pics of 325/50-15s on the back
I have the 325 BF drag radials on my 2wd jimmy, got about 1/2" clearance on the fenderwells.
|
10-01-2007, 10:45 AM | #19 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
Re: Anyone have pics of 325/50-15s on the back
Tom- any mods necessary?. What size rim?
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
10-01-2007, 11:13 AM | #20 |
Senior Member
Join Date: Mar 2007
Location: VANCOUVER ISLAND, B.C., Canada
Posts: 1,602
|
Re: Anyone have pics of 325/50-15s on the back
I like BF. Radial T/A's and was running P305 - 50 X 15's. Time to replace the backs and they are not made anymore! (could be just in Canada don't know.) So I ended up with BF.T/A's - P295 50 X 15's and I must say I'm very happy. In the width I lost 10 mil or about 1/2 inch over all not even enough to notice. A P325 50 X 15 will increase your width by 30 mil which will be around 2' to 2.5' inches which I think will create a rubbing problem in the stock wheel well. (IMHO)
esll.
__________________
Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member) |
10-03-2007, 12:01 AM | #21 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
Well I got them on, still have a good inch of clearance on the inside. And they hook really good too
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... Last edited by kelsfine69; 10-03-2007 at 12:04 AM. |
10-03-2007, 12:10 AM | #22 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Re: Anyone have pics of 325/50-15s on the back
Sorry to hijack but do you have any close up pics of you ladder bars? Did you make them or are they Lakewoods?...
|
10-03-2007, 06:55 PM | #23 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
Hand made
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
10-03-2007, 09:58 PM | #24 | |
Registered User
Join Date: Jan 2004
Location: Whitehorse YK Canada
Posts: 2,651
|
Re: Anyone have pics of 325/50-15s on the back
Quote:
295 is 295 mms wide and 325 would be 325 mms wide, therefore the new tires are 30mm or 3 cms wider. They will be taller because the aspect ratio , the 50, stays the same. The 50 refers to the sidewall height in percent compared to the width. So the new tires are wider and taller. By the way, I would love to get together some time and see your truck. I send 4 -6 weeks each summer about 15 mins SE of Leduc. I met Tim this summer and he was talking about getting a ride in your truck........
__________________
Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is! |
|
10-03-2007, 11:20 PM | #25 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Anyone have pics of 325/50-15s on the back
And he had nothing but bad things to say I bet.
Sure man sounds like fun, Tim and I should be hooking up for a BBQ soon... Oh and heres a ladder bar pic, only one i could find.
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... Last edited by kelsfine69; 10-03-2007 at 11:24 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|