Do 15x10's Fit under??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10addict · 10-05-2007, 02:23 PM

Hello All,
I am working on my new shop truck project and am going to run 15" steelies on it... Its getting air ride and will get down really good.. I am wondering if the 15x10's fit under the inside of the bed sides (fleet side) and if so what offset should I go with... Most all of the pics I look at on here appear that the buldge of the tire would rub the bed side.. I am not worried about the inside, I can massage the inner wheel wells if I have to.. Love Pics! Thanks!!

Ackattack · 10-05-2007, 02:53 PM

I ran 15x10s with 295/50/15 for a long time. I wasn't dropped extremely low, but never had a rubbing problem. I don't remember exactly, but I'm guessing they were 4 - 4.5" back spacing.

lyrikz · 10-05-2007, 03:19 PM

Quote:

Originally Posted by c10addict

Hello All,
I am working on my new shop truck project and am going to run 15" steelies on it... Its getting air ride and will get down really good.. I am wondering if the 15x10's fit under the inside of the bed sides (fleet side) and if so what offset should I go with... Most all of the pics I look at on here appear that the buldge of the tire would rub the bed side.. I am not worried about the inside, I can massage the inner wheel wells if I have to.. Love Pics! Thanks!!

I just sold my 15x10 rallys because they will rub.. I had 295/50/15 on em and yes, they stick out to far. I dont know what my backspacing was. I had a solid 2 inches between the tire and the side of my bed so they would of fit VERY nice if the backspacing was about 1.5 inches more...

scatesracing · 10-05-2007, 04:25 PM

Mine had five inch back space and didnt rub with 305/50/15s i had six inch blocks in the back..... it sat pretty low and didnt ever rub... i will try and find pics.. that was in high school. and i didnt take very many pics

mark's68 · 10-05-2007, 04:35 PM

the 10'' wheels never gave me trouble till I put some 31/13 mickey thompson's on. Then they rubbed a little on the inside.

cdowns · 10-05-2007, 05:25 PM

i had the same as arkracing did and had 4" drop coils and even with the truck load to coilbind i never had a rub

corn · 10-05-2007, 06:18 PM

6" drop & 10" slots with 275/60's. Havent had anything rub yet...

c10addict · 10-05-2007, 07:19 PM

looking at Corns truck it appears that if you got the bedsides down over the tires they woul rub... anyone make a 15x9 steel wheel????

c10addict · 10-05-2007, 07:20 PM

do you know the back space?

corn · 10-05-2007, 07:22 PM

Cant remember but the slots dont really have much back space. Most are 3 1/2 I think...

xmitsu10 · 10-05-2007, 07:48 PM

15x10 with 275/60 and a 5" rear drop. No rubbing. No issues. 4.25 backspace.

72highlander · 10-05-2007, 08:12 PM

15x10's and 275/60's, bagged, no rubbing at all. pumpkin will touch bed floor and tires don't rub. not positive of offset, but the right offset will work.

lyrikz · 10-05-2007, 08:13 PM

Quote:

Originally Posted by c10addict

do you know the back space?

the 15x10s will fit NO DOUBT, but you HAVE to have the right offset backspacing... I had two inches between my tires and the side of the bed. All i needed was about an inch for what i needed to clear... Wrong backspacing... ftl

72highlander · 10-05-2007, 08:15 PM

if i'm not mistaken, i think mine have 5" backspacing.

Robznob11 · 10-05-2007, 08:21 PM

mine is the 67 narrower rear but any how mine are 15x12 6.5 bs with 345 55 15 drag radials and they bearly touched so I rolled the lip slightly i have 6 drop rear with bed body droped another 3 in more less it rides like a aired out bagged stock chassie

10-05-2007, 02:23 PM	#1
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Do 15x10's Fit under??? Hello All, I am working on my new shop truck project and am going to run 15" steelies on it... Its getting air ride and will get down really good.. I am wondering if the 15x10's fit under the inside of the bed sides (fleet side) and if so what offset should I go with... Most all of the pics I look at on here appear that the buldge of the tire would rub the bed side.. I am not worried about the inside, I can massage the inner wheel wells if I have to.. Love Pics! Thanks!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

10-05-2007, 02:53 PM	#2
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: Do 15x10's Fit under??? I ran 15x10s with 295/50/15 for a long time. I wasn't dropped extremely low, but never had a rubbing problem. I don't remember exactly, but I'm guessing they were 4 - 4.5" back spacing. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

10-05-2007, 04:25 PM	#4
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Do 15x10's Fit under??? Mine had five inch back space and didnt rub with 305/50/15s i had six inch blocks in the back..... it sat pretty low and didnt ever rub... i will try and find pics.. that was in high school. and i didnt take very many pics

10-05-2007, 04:35 PM	#5
mark's68 Registered User Join Date: Aug 2007 Location: greenville,ms. Posts: 47	Re: Do 15x10's Fit under??? the 10'' wheels never gave me trouble till I put some 31/13 mickey thompson's on. Then they rubbed a little on the inside.

10-05-2007, 05:25 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Do 15x10's Fit under??? i had the same as arkracing did and had 4" drop coils and even with the truck load to coilbind i never had a rub __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-05-2007, 06:18 PM	#7
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Do 15x10's Fit under??? 6" drop & 10" slots with 275/60's. Havent had anything rub yet... Last edited by corn; 10-10-2009 at 12:17 PM.

10-05-2007, 07:19 PM	#8
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Do 15x10's Fit under??? looking at Corns truck it appears that if you got the bedsides down over the tires they woul rub... anyone make a 15x9 steel wheel???? __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

10-05-2007, 07:20 PM	#9
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Do 15x10's Fit under??? do you know the back space? __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

10-05-2007, 07:22 PM	#10
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Do 15x10's Fit under??? Cant remember but the slots dont really have much back space. Most are 3 1/2 I think...

10-05-2007, 07:48 PM	#11
xmitsu10 Registered User Join Date: Aug 2006 Location: Alton, New Hampshire Posts: 274	Re: Do 15x10's Fit under??? 15x10 with 275/60 and a 5" rear drop. No rubbing. No issues. 4.25 backspace. Attached Images __________________ 71 Cheyenne SWB

10-05-2007, 08:12 PM	#12
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: Do 15x10's Fit under??? 15x10's and 275/60's, bagged, no rubbing at all. pumpkin will touch bed floor and tires don't rub. not positive of offset, but the right offset will work. Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

10-05-2007, 08:15 PM	#14
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: Do 15x10's Fit under??? if i'm not mistaken, i think mine have 5" backspacing. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

10-05-2007, 08:21 PM	#15
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Do 15x10's Fit under??? mine is the 67 narrower rear but any how mine are 15x12 6.5 bs with 345 55 15 drag radials and they bearly touched so I rolled the lip slightly i have 6 drop rear with bed body droped another 3 in more less it rides like a aired out bagged stock chassie __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.