Origional Bucket seats. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pumkin Truck · 05-14-2002, 02:21 PM

I have been thinking that instead of puting some swivel bucket seats in my truck, to put in the origionals. Anyone have any pics? My friend has a 66 tang with reproduction seats and it puts class in his car. Feel comfortable to. Anyone know how much they would cost? upwards of $500 right? Can i get some out of the junkyard and reuposlter them, would that be cheaper? Thanks all!

------------------
1969 Gmc swb stepside Wimpy six soon to be a 500cid cadillac!!(as soon as i figure out if it is one?!!!)

tom hand · 05-14-2002, 02:58 PM

While these are not truely original they do have an original look.

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

**BIG ORANGE** · 05-14-2002, 03:09 PM

I will have the pas.side seat brackets for the bucket seats for sale in a couple weeks.
So anyone who has blazer seats and wont to put them in a truck can.

------------------
1971 chevy suburban (BIG ORANGE)
1970,68,90 swb Little BUCKS one day
67/72 truck parts bought/sold
LIFE IS GOOD,THANK GOD FOR IT!

**1970 CST Short Wide** · 05-14-2002, 03:33 PM

I have the origanal 68-69 3 piece buckets in my 70 CST and I think it really sets the interior off. Go to picturetrail.com/70CST for a look see.

Nice seats Tom

------------------
Steve's 70 CST
02 Burb (wifes Truck) www.picturetrail.com/70CST

[This message has been edited by 1970 CST Short Wide (edited May 14, 2002).]

71402BB · 05-14-2002, 07:41 PM

Tom your truck is soooooo nice every time I see it a start to droooool.....

------------------
71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's

72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!)

68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi

Longhorn Man · 05-14-2002, 09:49 PM

ctually the 3 seater is original for the 67/68...in 69 they went to the set up seen in tom's pic up there.
The 3 seater is the one I want even so.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
E-mail longhornmail@yahoo.com
My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough?
Columbus Ohio

tom hand · 05-14-2002, 10:02 PM

Pumkin Truck, you were asking what they cost. Well it all depends on how lucky you are and how much you beat the bushes. The seats in my truck were really hard to find, my neigbor put them out on the curb for the trash. The only money I have in them is the covers. I wish he could see them now. Thanks for the kind words guys.

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

Pumkin Truck · 05-14-2002, 10:28 PM

Those are nice seats Tom but is there a way for there to be a middle seat that folds down like that?1970 CST Short Wide, nice truck, so the price would be pretty high huh, thanks for the info guys

Bram · 05-15-2002, 09:12 AM

ttt

------------------
72Cheyenne3/4ton4x4PsPbAcTiltTach411PosiEaton

**CPNE** · 05-15-2002, 09:19 AM

I have a set like Tom's for sale. Need covers and some foam on driver side. $325 plus shipping. Install covers yourself and you'd have a nice set of originals for $600 or so. Includes brackets and center console. Out of 72 CST Blazer

------------------
Jeff Jesseman
Cheyenne Parts Northeast
Franconia, NH

67 Chevy SWB Fleetside
70 GMC Burb 1/2 ton 2wd
72 Chevy Burb 3/4 ton 4x4

Parts bought and sold

Pumkin Truck · 05-15-2002, 12:21 PM

hmm.. that sounds like a good bargain CPNE, let me do some more research around the local boneyards to see what i can find, thanks for the information i now have a good understanding of this bucket seat topic.

**1970 CST Short Wide** · 05-15-2002, 12:41 PM

Longhornmail
I stand corrected is was 67-68 and I like mine. It was all redone and like new. I did pay a premium $600 but had to have it.

------------------
Steve's 70 CST
02 Burb (wifes Truck) www.picturetrail.com/70CST

[This message has been edited by 1970 CST Short Wide (edited May 15, 2002).]

68ChevC10 · 05-15-2002, 02:00 PM

Hmmmm... So what year/type of seats do I have in mine? The back's taller than the 67-68's.

68ChevC10

------------------
1968 Chevrolet C10 Stepside. My driver. Aint life cool.

Longhorn Man · 05-15-2002, 09:48 PM

I prefer the tripple too. I don't care what year truck I have, if not a true resto, and getting what I want and not what I'm stuck with...the tripple is my choice.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
E-mail longhornmail@yahoo.com
My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough?
Columbus Ohio

05-14-2002, 02:21 PM	#1
Pumkin Truck Thats just prime! Join Date: Mar 2002 Location: TEXAS Posts: 720	Origional Bucket seats. I have been thinking that instead of puting some swivel bucket seats in my truck, to put in the origionals. Anyone have any pics? My friend has a 66 tang with reproduction seats and it puts class in his car. Feel comfortable to. Anyone know how much they would cost? upwards of $500 right? Can i get some out of the junkyard and reuposlter them, would that be cheaper? Thanks all! ------------------ 1969 Gmc swb stepside Wimpy six soon to be a 500cid cadillac!!(as soon as i figure out if it is one?!!!) __________________ 69 GMC short bed stepside with a wimpy six that can barely pull itself. 99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1

05-14-2002, 02:58 PM	#2
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	While these are not truely original they do have an original look. ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-14-2002, 03:09 PM	#3
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,754	I will have the pas.side seat brackets for the bucket seats for sale in a couple weeks. So anyone who has blazer seats and wont to put them in a truck can. ------------------ 1971 chevy suburban (BIG ORANGE) 1970,68,90 swb Little BUCKS one day 67/72 truck parts bought/sold LIFE IS GOOD,THANK GOD FOR IT! __________________ Things happen for a reason!

05-14-2002, 03:33 PM	#4
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,169	I have the origanal 68-69 3 piece buckets in my 70 CST and I think it really sets the interior off. Go to picturetrail.com/70CST for a look see. Nice seats Tom ------------------ Steve's 70 CST 02 Burb (wifes Truck) www.picturetrail.com/70CST [This message has been edited by 1970 CST Short Wide (edited May 14, 2002).] __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

05-14-2002, 07:41 PM	#5
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	Tom your truck is soooooo nice every time I see it a start to droooool..... ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

05-14-2002, 09:49 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	ctually the 3 seater is original for the 67/68...in 69 they went to the set up seen in tom's pic up there. The 3 seater is the one I want even so. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. E-mail longhornmail@yahoo.com My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough? Columbus Ohio

05-14-2002, 10:02 PM	#7
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	Pumkin Truck, you were asking what they cost. Well it all depends on how lucky you are and how much you beat the bushes. The seats in my truck were really hard to find, my neigbor put them out on the curb for the trash. The only money I have in them is the covers. I wish he could see them now. Thanks for the kind words guys. ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-14-2002, 10:28 PM	#8
Pumkin Truck Thats just prime! Join Date: Mar 2002 Location: TEXAS Posts: 720	Those are nice seats Tom but is there a way for there to be a middle seat that folds down like that?1970 CST Short Wide, nice truck, so the price would be pretty high huh, thanks for the info guys __________________ 69 GMC short bed stepside with a wimpy six that can barely pull itself. 99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1

05-15-2002, 09:12 AM	#9
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	ttt ------------------ 72Cheyenne3/4ton4x4PsPbAcTiltTach411PosiEaton __________________ 72CheyenneSuper1ton4x4BigBlock

05-15-2002, 09:19 AM	#10
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	I have a set like Tom's for sale. Need covers and some foam on driver side. $325 plus shipping. Install covers yourself and you'd have a nice set of originals for $600 or so. Includes brackets and center console. Out of 72 CST Blazer ------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-15-2002, 12:21 PM	#11
Pumkin Truck Thats just prime! Join Date: Mar 2002 Location: TEXAS Posts: 720	hmm.. that sounds like a good bargain CPNE, let me do some more research around the local boneyards to see what i can find, thanks for the information i now have a good understanding of this bucket seat topic. __________________ 69 GMC short bed stepside with a wimpy six that can barely pull itself. 99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1

05-15-2002, 12:41 PM	#12
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,169	Longhornmail I stand corrected is was 67-68 and I like mine. It was all redone and like new. I did pay a premium $600 but had to have it. ------------------ Steve's 70 CST 02 Burb (wifes Truck) www.picturetrail.com/70CST [This message has been edited by 1970 CST Short Wide (edited May 15, 2002).] __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

05-15-2002, 02:00 PM	#13
68ChevC10 I am Kayser Soze Join Date: Jul 2001 Location: Texas Posts: 116	Hmmmm... So what year/type of seats do I have in mine? The back's taller than the 67-68's. 68ChevC10 ------------------ 1968 Chevrolet C10 Stepside. My driver. Aint life cool. __________________ 1968 Chevrolet C10 Stepside. My driver. Ain't life cool.

05-15-2002, 09:48 PM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I prefer the tripple too. I don't care what year truck I have, if not a true resto, and getting what I want and not what I'm stuck with...the tripple is my choice. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. E-mail longhornmail@yahoo.com My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough? Columbus Ohio

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.