Small Block New Thumper Camshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 10-31-2007, 07:32 PM

I HAVE A BRAND NEW ENGLE HYDRAULIC HOT ROD CAMSHAFT. this has never been in a engine. its a maxed out hydraulic grind like for pro street performance etc. power band is from 2500-7000 rpm,s . its recomended for 10-1 compression and up. if you want a cam that racks off this is it. i paid almost 300.00 for this and i,ll sell it for 125.00 delivered.
bob
spec,s.
in. 520 - exh. 537 lift
in. 294 - exh.310 diration

BCOWANWHEELS · 10-31-2007, 10:43 PM

ttt

396muncie · 11-01-2007, 08:17 AM

So this is an Engle cam, not a Comp Cams Thumpr cam, right? I couldn't find it on the Engle Cams website. What's the duration at .050 and the Lobe Seperation Angle(LSA)? Is it flat tappet or roller? Any part #? Thanks

BCOWANWHEELS · 11-01-2007, 12:49 PM

grind number EP28/30-HYD, INTAKE OPEN @20 EX CLOSES @22, INT. CLOSES @48 EXH. OPENS @ 58, GROSS CAM LIFT INT. 347 & DUR.@.050 IS 248,
GROSS CAM LIFT EXH IS 358 WITH DURATION 260 @.050.
LOBE CENTERS 106
ITS A HYDRAULIC LIFTER CAM , BIG AS YOU CAN GET AND WHAT THE ANTI PUMPUP LIFTER IS CAPABLE OF.
ITS NOT IN THE ENGLE BOOKS ITS A SPECIAL HI-PERF SBC CAM FOR PRO-STREET USE.

396muncie · 11-01-2007, 06:01 PM

Do you have the cam card with this? Any lifters to go with it? Are you flexible on the price at all? Thanks

BCOWANWHEELS · 11-01-2007, 07:47 PM

MAN I,AM TAKING a big hit as it is. 125.00 delivered is about giving it away. it was over 300.00 after shipping. no theres no lifters just a brand new cam.... and yes the cam card is with it from engle.
bob

BCOWANWHEELS · 11-02-2007, 01:21 PM

Ttt

396muncie · 11-02-2007, 07:02 PM

Well, if you get to the point where you'll take $100 shipped, let me know. Not trying to offend and if you can't go that low, no problem. Thanks

BCOWANWHEELS · 11-02-2007, 07:03 PM

i wont go that low and you wouldnt also. but thanks

BCOWANWHEELS · 11-28-2007, 04:47 PM

ttt

10-31-2007, 07:32 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Small Block New Thumper Camshaft I HAVE A BRAND NEW ENGLE HYDRAULIC HOT ROD CAMSHAFT. this has never been in a engine. its a maxed out hydraulic grind like for pro street performance etc. power band is from 2500-7000 rpm,s . its recomended for 10-1 compression and up. if you want a cam that racks off this is it. i paid almost 300.00 for this and i,ll sell it for 125.00 delivered. bob spec,s. in. 520 - exh. 537 lift in. 294 - exh.310 diration __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 11-01-2007 at 12:18 AM.

10-31-2007, 10:43 PM	#2
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft ttt __________________ I BELIEVE IN JOHN 3:16

11-01-2007, 08:17 AM	#3
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Small Block New Thumper Camshaft So this is an Engle cam, not a Comp Cams Thumpr cam, right? I couldn't find it on the Engle Cams website. What's the duration at .050 and the Lobe Seperation Angle(LSA)? Is it flat tappet or roller? Any part #? Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

11-01-2007, 12:49 PM	#4
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft grind number EP28/30-HYD, INTAKE OPEN @20 EX CLOSES @22, INT. CLOSES @48 EXH. OPENS @ 58, GROSS CAM LIFT INT. 347 & DUR.@.050 IS 248, GROSS CAM LIFT EXH IS 358 WITH DURATION 260 @.050. LOBE CENTERS 106 ITS A HYDRAULIC LIFTER CAM , BIG AS YOU CAN GET AND WHAT THE ANTI PUMPUP LIFTER IS CAPABLE OF. ITS NOT IN THE ENGLE BOOKS ITS A SPECIAL HI-PERF SBC CAM FOR PRO-STREET USE. __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 11-01-2007 at 12:50 PM.

11-01-2007, 06:01 PM	#5
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Small Block New Thumper Camshaft Do you have the cam card with this? Any lifters to go with it? Are you flexible on the price at all? Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

11-01-2007, 07:47 PM	#6
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft MAN I,AM TAKING a big hit as it is. 125.00 delivered is about giving it away. it was over 300.00 after shipping. no theres no lifters just a brand new cam.... and yes the cam card is with it from engle. bob __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 11-01-2007 at 07:48 PM.

11-02-2007, 01:21 PM	#7
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft Ttt __________________ I BELIEVE IN JOHN 3:16

11-02-2007, 07:02 PM	#8
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Small Block New Thumper Camshaft Well, if you get to the point where you'll take $100 shipped, let me know. Not trying to offend and if you can't go that low, no problem. Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

11-02-2007, 07:03 PM	#9
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft i wont go that low and you wouldnt also. but thanks __________________ I BELIEVE IN JOHN 3:16

11-28-2007, 04:47 PM	#10
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft ttt __________________ I BELIEVE IN JOHN 3:16

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.