found some slots what do you think? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

special70gmc · 01-05-2003, 07:36 PM

i found these wheels a guy is selling them for $80 for all 4 no lugs or centers. he let me take this one home do you think i should buy em? ill see if they fit tomarrow, they seem to have a lot of back spacing. and they measure 17 1/4 im assuming thats 17''. two more questions where can i find centers for them? and the guy has a 67 step and the bed is 9' long is this weird? long horn step?

special70gmc · 01-05-2003, 07:37 PM

back

special70gmc · 01-05-2003, 07:37 PM

another

*racedvl* · 01-05-2003, 07:41 PM

Sounds like a great deal to me. I love slots! Also, Longhorns were built on 9' stepside frames. But is it uncommon? Yes, well at least I've never seen one. . .

crazy longhorn · 01-05-2003, 08:00 PM

racedvl, it is my understanding that longhorns were built on 133" WB cab/ chassis frames. It would be my guess that the 9' steps were also built on that same chassis.......GM was pretty consistant about not spendig too much cash on different tooling!

Blue_71 · 01-05-2003, 08:15 PM

e e eight lug sssssslots!!!!

BUY!!!!!!!!!!!!!!!!!!!!!!!

jeepbut · 01-05-2003, 08:23 PM

I think they would be 16.5 wheels-a very good buy at that price. Thanks, Lyman.

Chevy Punk · 01-05-2003, 08:30 PM

Those are exactly what i want for my truck

marcuspboldt · 01-05-2003, 09:24 PM

If you don't buy them can I?

special70gmc · 01-05-2003, 10:04 PM

any one have pics of these wheels on our trucks?

Blue_71 · 01-05-2003, 10:11 PM

4x4

longhorn

aniversery 68

da-burb · 01-05-2003, 10:24 PM

Here they are on my 72 4x4. mine are 16.5's running a 33x10.5 tire. $80 bucks is a good price, I got the last set for $50 with 3 good rims and 1 that had been repaired(welded) on the bead edge. With a little sanding I think it could look like new again.

special70gmc · 01-05-2003, 10:38 PM

what about center caps?any one know where to find em?

da-burb · 01-05-2003, 10:45 PM

any tire shop will carry center caps. If I were you, I'd get the stainless steel instead of the chromed steel. Unless this will be a garage queen and never see the weather.

Longhorn Man · 01-05-2003, 11:18 PM

I would grab tehm if I were you. You can polish them up pretty easy to look like the 4X4 shown above.
All one ton pickups in '67 were stepsides. All one ton pickups that were not Longhorns, came with a 9 foot step side bed.
(pickup....not cab/chassis or cowl/chassi)

Stout72 · 01-06-2003, 01:14 PM

Buy 'em! The price is right. They're probably 16.5" Personally, I just love slotted mags. Got 'em on my rig. But there's enough pics here already, and mine need a good polishing.

special70gmc · 01-06-2003, 04:29 PM

they dont fit! there to da*m wide the lugs dont evnt poke through. i was just begining to really like em too!both front and back dont fit backs are closer though. i found out thay came off a dodge.

special70gmc · 01-06-2003, 05:39 PM

right now im pricing longer lugs the wheel i showed you is the worst one of the bunch so i dont wanna pass it up

breeh · 01-06-2003, 08:44 PM

I bought mine for $80.00 as well. The tire shop guys hate them because of the lug nut design.

BLAZERMAN · 01-06-2003, 10:15 PM

breeh, That's a really sharp stepside you have, what size lift and tires do you have? any more pics of it?

breeh · 01-06-2003, 11:05 PM

BLAZERMAN, thanks for the compliments. I love this truck now that I have been able to spend some time behind the wheel. It has a 4" Skyjacker lift and 33" tires. I am planning on getting some more pics soon. I am waiting for some real snow to fall in the mountains!

low 84 · 01-07-2003, 12:17 AM

Quote:

Originally posted by breeh
I bought mine for $80.00 as well. The tire shop guys hate them because of the lug nut design.

yes we do!

specialy when there is eight of them to take off, put on, and torque. times that by four wheels and you gotta touch the lugs 96 times, hehe.

Longhorn Man · 01-07-2003, 01:03 AM

The lugs don't need to poke out. The prober lug nuts should be shanked, and actually reach into the holes.
16.5 does kinda suck, but sometimes you gotta take the bad with the good.
Dodge, chevy, ford...they all bolt up to these. (at least if it is older dodge/chevy/ford)

Hooter · 01-07-2003, 04:08 AM

Slots kick ass!
I had some on my 1974 cheyenne super 20

Stout72 · 01-07-2003, 02:41 PM

Quote:

they dont fit! there to da*m wide the lugs dont evnt poke through

Longhornmail is right. The lugs don't need to poke through. They take a bossed (shanked) type lug nut, the boss should fit neatly into the lug holes, and have a tapered washer up under the hex. Give them another shot, try using the proper lug nuts, as long as you get enough thread engagement and the bolt circle is correct, you should be good to go.

01-05-2003, 07:36 PM	#1
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	found some slots what do you think? i found these wheels a guy is selling them for $80 for all 4 no lugs or centers. he let me take this one home do you think i should buy em? ill see if they fit tomarrow, they seem to have a lot of back spacing. and they measure 17 1/4 im assuming thats 17''. two more questions where can i find centers for them? and the guy has a 67 step and the bed is 9' long is this weird? long horn step? Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-05-2003, 07:37 PM	#2
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	back Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-05-2003, 07:37 PM	#3
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	another Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-05-2003, 08:00 PM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	racedvl, it is my understanding that longhorns were built on 133" WB cab/ chassis frames. It would be my guess that the 9' steps were also built on that same chassis.......GM was pretty consistant about not spendig too much cash on different tooling! __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-05-2003, 10:04 PM	#10
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	any one have pics of these wheels on our trucks? __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-05-2003, 07:41 PM	#4
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Sounds like a great deal to me. I love slots! Also, Longhorns were built on 9' stepside frames. But is it uncommon? Yes, well at least I've never seen one. . .

01-05-2003, 08:15 PM	#6
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	e e eight lug sssssslots!!!! BUY!!!!!!!!!!!!!!!!!!!!!!!

01-05-2003, 08:23 PM	#7
jeepbut Registered User Join Date: May 2001 Location: Corpus Christi, Tx. U.S.A. Posts: 271	I think they would be 16.5 wheels-a very good buy at that price. Thanks, Lyman.

01-05-2003, 08:30 PM	#8
Chevy Punk Registered User Join Date: Apr 2002 Location: Blaine WA Posts: 455	Those are exactly what i want for my truck

01-05-2003, 09:24 PM	#9
marcuspboldt Registered Abuser Join Date: Nov 2002 Location: Ft.Worth Texas Posts: 1,001	If you don't buy them can I?

01-05-2003, 10:11 PM	#11
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	4x4 longhorn aniversery 68

01-05-2003, 10:24 PM	#12
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Here they are on my 72 4x4. mine are 16.5's running a 33x10.5 tire. $80 bucks is a good price, I got the last set for $50 with 3 good rims and 1 that had been repaired(welded) on the bead edge. With a little sanding I think it could look like new again. Attached Images __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 Last edited by da-burb; 01-05-2003 at 10:26 PM.

01-05-2003, 10:38 PM	#13
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	what about center caps?any one know where to find em? __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-05-2003, 10:45 PM	#14
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	any tire shop will carry center caps. If I were you, I'd get the stainless steel instead of the chromed steel. Unless this will be a garage queen and never see the weather. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

01-05-2003, 11:18 PM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I would grab tehm if I were you. You can polish them up pretty easy to look like the 4X4 shown above. All one ton pickups in '67 were stepsides. All one ton pickups that were not Longhorns, came with a 9 foot step side bed. (pickup....not cab/chassis or cowl/chassi)



Register or Log In To remove these advertisements.

01-06-2003, 01:14 PM	#16
Stout72 Not my good side. Join Date: Mar 2002 Location: Fairfield, California Posts: 222	Buy 'em! The price is right. They're probably 16.5" Personally, I just love slotted mags. Got 'em on my rig. But there's enough pics here already, and mine need a good polishing. __________________ 72 Chevy K20 Custom Camper, 350/350, 4" lift, dual shock suspension front & rear. Daily driver and a work in progress. 00 Suburban LT 90 Camaro RS 79 Yamaha XS1100 Special (Ol' Reliable)

01-06-2003, 04:29 PM	#17
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	they dont fit! there to da*m wide the lugs dont evnt poke through. i was just begining to really like em too!both front and back dont fit backs are closer though. i found out thay came off a dodge. __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-06-2003, 05:39 PM	#18
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	right now im pricing longer lugs the wheel i showed you is the worst one of the bunch so i dont wanna pass it up __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-06-2003, 08:44 PM	#19
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	I bought mine for $80.00 as well. The tire shop guys hate them because of the lug nut design. Attached Images __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-06-2003, 10:15 PM	#20
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	breeh, That's a really sharp stepside you have, what size lift and tires do you have? any more pics of it?

01-06-2003, 11:05 PM	#21
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	BLAZERMAN, thanks for the compliments. I love this truck now that I have been able to spend some time behind the wheel. It has a 4" Skyjacker lift and 33" tires. I am planning on getting some more pics soon. I am waiting for some real snow to fall in the mountains! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-07-2003, 01:03 AM	#23
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	The lugs don't need to poke out. The prober lug nuts should be shanked, and actually reach into the holes. 16.5 does kinda suck, but sometimes you gotta take the bad with the good. Dodge, chevy, ford...they all bolt up to these. (at least if it is older dodge/chevy/ford)

01-07-2003, 04:08 AM	#24
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	Slots kick ass! I had some on my 1974 cheyenne super 20 Attached Images __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.