TH350 torque converter- $50 DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 11-13-2007, 01:36 PM

I have a new th350 converter in the box. Was ran on the WyoTech trans dyno for about 5 minutes on a rebuilt transmission and worked just fine. I sold the trans way back and have been hauling around this converter for a long time. I'd prefer not to ship it, so we'll keep this one local for now. No pics, but I can get one if needed.
**please respond in the thread only**

**clay68c10** · 11-14-2007, 11:08 PM

ttt
I think it'll fit a TH400 also.

rlm316 · 11-15-2007, 12:51 PM

What is the stall speed?

**clay68c10** · 11-15-2007, 03:24 PM

It's a stocker, so probably 1500 or so.

**clay68c10** · 11-16-2007, 08:46 AM

Back ttt for wednesday.

**clay68c10** · 11-18-2007, 04:00 PM

Taking offers...

Longhorn Man · 11-18-2007, 07:06 PM

it will fit a TH400, but will have the smaller bolt pattern where it mates to the flywheel. The stall RPMs will be up a couple hundred verses a TH400 converter due to lighter weight and less fluid. (acording to the guy who rebuilt my tranny.... the TH350 with a TH400 converter in it)

Gray Ghost · 11-18-2007, 07:19 PM

I'll take it if I can pick it up in Dallas. My schedule is brutal for the next four weeks but I can meet you somewhere off Central Expressway anyday next week.

**clay68c10** · 11-19-2007, 11:59 AM

We can do it whenever. If you want to wait till your schedule is a little less insane that would work too. I actually work right near Love Field. Let me know what works for you.
817-602-9324

Gray Ghost · 11-19-2007, 07:34 PM

I'll call you tomorrow...consider it sold.

11-13-2007, 01:36 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	TH350 torque converter- $50 DFW I have a new th350 converter in the box. Was ran on the WyoTech trans dyno for about 5 minutes on a rebuilt transmission and worked just fine. I sold the trans way back and have been hauling around this converter for a long time. I'd prefer not to ship it, so we'll keep this one local for now. No pics, but I can get one if needed. please respond in the thread only __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-14-2007, 11:08 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: TH350 torque converter- $50 DFW ttt I think it'll fit a TH400 also. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-15-2007, 12:51 PM	#3
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: TH350 torque converter- $50 DFW What is the stall speed?

11-15-2007, 03:24 PM	#4
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: TH350 torque converter- $50 DFW It's a stocker, so probably 1500 or so. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-16-2007, 08:46 AM	#5
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: TH350 torque converter- $50 DFW Back ttt for wednesday. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-18-2007, 04:00 PM	#6
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: TH350 torque converter- $50 DFW Taking offers... __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-18-2007, 07:06 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: TH350 torque converter- $50 DFW it will fit a TH400, but will have the smaller bolt pattern where it mates to the flywheel. The stall RPMs will be up a couple hundred verses a TH400 converter due to lighter weight and less fluid. (acording to the guy who rebuilt my tranny.... the TH350 with a TH400 converter in it)

11-18-2007, 07:19 PM	#8
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: TH350 torque converter- $50 DFW I'll take it if I can pick it up in Dallas. My schedule is brutal for the next four weeks but I can meet you somewhere off Central Expressway anyday next week. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

11-19-2007, 11:59 AM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: TH350 torque converter- $50 DFW We can do it whenever. If you want to wait till your schedule is a little less insane that would work too. I actually work right near Love Field. Let me know what works for you. 817-602-9324 __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-19-2007, 07:34 PM	#10
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: TH350 torque converter- $50 DFW I'll call you tomorrow...consider it sold. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.