|
11-20-2007, 12:18 PM
|
#1 |
|
Registered User
 
Join Date: Jan 2006
Location: Warrington, PA
Posts: 403
|
Steering stablilizer
I am currently redoing the front end of my 69 1/2 ton and was wondering if any of you guys have installed a steering stabilizer? Do they improve the steering? Any pics of the setup would be helpfull...thanks....rick
|
|
|
|
11-20-2007, 12:53 PM
|
#2 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Steering stablilizer
Is your truck driving like a tractor in high gear going across a field full of badger holes? I've seen the stabilizers on 4 wheel drive trucks, but not on 2wd. Do you have power steering?
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
11-20-2007, 01:02 PM
|
#3 |
|
Registered User
Join Date: Jan 2006
Location: Warrington, PA
Posts: 403
|
Re: Steering stablilizer
I have power sterring and it drives ok, sounds like i don't need a stabilizer.
|
|
|
|
|
11-20-2007, 01:09 PM
|
#4 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Steering stablilizer
My GMC was a beast to drive with manual steering and brakes, the 16 inch stock wheels and bias ply tires and I considered a stabilizer, but when I went to 15's and converted to power all was good.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.
|
|
|
|
|
11-20-2007, 01:23 PM
|
#5 |
|
Fat Fendered Fleetside
Join Date: Nov 2004
Location: WPB, S. FL, USA, Earth
Posts: 718
|
Re: Steering stablilizer
I had put one in my truck before I switched it to Power steering. My truck is 2wd, but after bumping a curb and having the wheel spin so fast that it nearly took off my hand, was time to put a stabilizer in. When I put the PS unit in it I took the stabilizer out, for no real reason other than to clean up the front...
But I don't know why you would really want on in a 2wd. it shouldn't affect the steering, if your ball joints and pitman/idler arm are bent or worn out, then even with a stabilizer you'll still have sloppy steering....
__________________
71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
