Anyone with a V6 motor???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-30-2007, 04:27 PM

Anyone with a V6 motor in their truck, if you still have the spid label on the glovebox, can you tell me what the code and what all its says on there about V6's, especially 67's. Mine has a 351 but don't know what the label says. Didn't know if there was a difference 305 or 351 on there. Thanks for any help, Randy

67_C-30 · 11-30-2007, 05:51 PM

I have a '67 Custom Camper with a 351E, but there is no SPID on the door., It actually looks like there never on was one (original paint, no sticky glue and no discoloration?) If you are trying to the decode the engine, the best way to tell is on the pad on the front of the block under the fuel pump. It will have 305E or 351E stamped on there (including the E). If you wondering about the truck you have, it is defintely a 351, you can tell by the exhaust manifolds.

teeitup · 11-30-2007, 07:25 PM

Thanks, yes I knew I had a 351. I think my glove box sounds like yours, doesn't look like anything ever on it. I was just curious if anyone else had anything on their spid. Thanks Randy

**uncle** · 11-30-2007, 08:01 PM

6 bangers were pretty much base model (not options) engines,so probably won't be on the SPID. They will be easy to pick out in the vin#,but not as a straight or V unfortunately. You won't see a 307 on the SPID either. I haven't,anyway.

67_C-30 · 11-30-2007, 08:08 PM

I think the V6's were actually considered optional though Tim, because even in the GMC's, the 250 L6 was the standard engine. I don't know if they were on listed on the SPID's that way or not though.

*ksjh1316* · 11-30-2007, 08:31 PM

I thoiught the only one that was not listed on the SPID was the 250 I-6 everything else was an option. My 292 is listed on the SPID I would think they would have done the same with the 351 V-6. How rare was this motor in one of these trucks?

**uncle** · 11-30-2007, 08:40 PM

Oh well,just when you think you know a little.

teeitup · 11-30-2007, 08:46 PM

CM1590D is the first part of vin. So 67 GMC's didn't have a spid? Just curious, Thanks Randy

**too much stuff** · 11-30-2007, 09:06 PM

Randy, i have seen quite a few 67-68 gmcs that appear to have never had a spid label...

rwgregory · 12-01-2007, 03:29 AM

Randy, my '67 GMC was purchased unmolested from the original owner and it has no glovebox label or any evidence of it ever having one. In the vin.# I believe it will have a "W" indicating it had a V-6 when it was built. You could always look in the springs under the seat and see if the build sheet is still there. On '67 GMC's that is about as close as you can get to a SPID label. As mentioned earlier you can check the engine size on the front, left deck area. If it is a 351 Magnum the 4 bolts that join the carb. to the intake will not be of equal distance side to side comparing front set to back set. Also, 351 Magnum exhaust manifolds look like an I-beam, where as standard 351E manifolds are smooth and rounded.

**Bob B.** · 12-01-2007, 03:49 AM

My '67 never had a SPID either. Yes, CS models had the 250 as standard, 292 optional and the CM had the 305 standard, 351 optional. Wish I knew how many '67 351E's were built, but I have been told not too many. There were no U.S. '67 GMC CE pickup models, only panels and Suburbans.

68C15 · 12-01-2007, 05:36 AM

no SPID on my 68 either. it was as basic and un-optioned as possible. I even think the rear view mirror was a dealer installed option.

chipflyer · 12-01-2007, 09:30 AM

According to GMC Pauls info the M in the model number iidentifies it as a V6.
http://www.gmcpauls.com/67-72_gmc.htm

This is the only one I have that has any info about the 305 V6 but sadly the date piece is not shown. I wasn't aware that GMC didn't always add a SPID label, guess that why I don't have many of those in my collection.

Learn something new everyday, good thread guys!

Jeff

teeitup · 12-01-2007, 10:10 AM

WOW, THANKS FOR ALL THE INFO GUYS!!!! I've never noticed a 67 without a spid, but I never get these in very often either. THANKS SO MUCH, Randy

bighead · 12-01-2007, 11:39 AM

None on my 67 GMC either

airdale94 · 12-01-2007, 12:55 PM

teeitup-M&M auto salvage in Topeka has a 67-68 GMC v-6 pretty much complete if you're looking for anything.

Chris H · 12-01-2007, 01:34 PM

Quote:

Originally Posted by teeitup

Anyone with a V6 motor in their truck, if you still have the spid label on the glovebox, can you tell me what the code and what all its says on there about V6's, especially 67's. Mine has a 351 but don't know what the label says. Didn't know if there was a difference 305 or 351 on there. Thanks for any help, Randy

Here is the spid from a 67 GMC C30 I had. Notice the V6351E engine (L23AJ).

chipflyer · 12-01-2007, 01:38 PM

BINGO! L23 is the rpo code! Thats one to save.

Jeff

67_C-30 · 12-01-2007, 05:29 PM

Quote:

Originally Posted by chipflyer

BINGO! L23 is the rpo code! Thats one to save.

Jeff

That way I get you make me one, you'll know what code to use!

**WorkinLonghorn** · 12-01-2007, 05:42 PM

Here's some real good info on the V-6. http://www.6066gmcguy.org/EngineData.htm

LONGHAIR · 12-01-2007, 07:56 PM

Hey Chris H
Did you notice the typo on the label?

F51KA... SHOCK ABSORDERS

factorystock · 12-01-2007, 08:09 PM

The SPID for the 67 GMC also shows the New Process 435GA instead the typical SM420. Does the 435GA directly bolt on or does it require a different bellhousing? Anyone ever attemped to upgrade to a 435GA?

67_C-30 · 12-01-2007, 08:24 PM

Mine came with the NP435-GA. It will bolt in directly in place of a SM420, although mine happens to be on the V6 bell housing. It has a shift pattern like a SM465 in which reverse is all the way over to the right and down.

**Bob B.** · 12-02-2007, 03:27 AM

The NP435GA was the most common 4 speed behind the V-6's. GMC felt that the ratios were better suited for the V-6, and the 435's torque capacity was higher. The 435 was only used in 4X2's, if the truck was a 4X4, it would have had the SM-420. Also, the 351E was 4X2 only. I did see one 351E with a 3 speed behind it. I think it was an SM-326.

**special-K** · 12-03-2007, 08:14 AM

No`67 GMC V8s made?

11-30-2007, 04:27 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Anyone with a V6 motor???? Anyone with a V6 motor in their truck, if you still have the spid label on the glovebox, can you tell me what the code and what all its says on there about V6's, especially 67's. Mine has a 351 but don't know what the label says. Didn't know if there was a difference 305 or 351 on there. Thanks for any help, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2007, 05:51 PM	#2
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Anyone with a V6 motor???? I have a '67 Custom Camper with a 351E, but there is no SPID on the door., It actually looks like there never on was one (original paint, no sticky glue and no discoloration?) If you are trying to the decode the engine, the best way to tell is on the pad on the front of the block under the fuel pump. It will have 305E or 351E stamped on there (including the E). If you wondering about the truck you have, it is defintely a 351, you can tell by the exhaust manifolds. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

11-30-2007, 07:25 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Anyone with a V6 motor???? Thanks, yes I knew I had a 351. I think my glove box sounds like yours, doesn't look like anything ever on it. I was just curious if anyone else had anything on their spid. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2007, 08:01 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Anyone with a V6 motor???? 6 bangers were pretty much base model (not options) engines,so probably won't be on the SPID. They will be easy to pick out in the vin#,but not as a straight or V unfortunately. You won't see a 307 on the SPID either. I haven't,anyway.

11-30-2007, 08:08 PM	#5
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Anyone with a V6 motor???? I think the V6's were actually considered optional though Tim, because even in the GMC's, the 250 L6 was the standard engine. I don't know if they were on listed on the SPID's that way or not though. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

11-30-2007, 08:31 PM	#6
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Anyone with a V6 motor???? I thoiught the only one that was not listed on the SPID was the 250 I-6 everything else was an option. My 292 is listed on the SPID I would think they would have done the same with the 351 V-6. How rare was this motor in one of these trucks?

11-30-2007, 08:40 PM	#7
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Anyone with a V6 motor???? Oh well,just when you think you know a little.

11-30-2007, 08:46 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Anyone with a V6 motor???? CM1590D is the first part of vin. So 67 GMC's didn't have a spid? Just curious, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2007, 09:06 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Anyone with a V6 motor???? Randy, i have seen quite a few 67-68 gmcs that appear to have never had a spid label... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-01-2007, 03:29 AM	#10
rwgregory Registered User Join Date: Apr 2005 Location: Chula Vista, California Posts: 495	Re: Anyone with a V6 motor???? Randy, my '67 GMC was purchased unmolested from the original owner and it has no glovebox label or any evidence of it ever having one. In the vin.# I believe it will have a "W" indicating it had a V-6 when it was built. You could always look in the springs under the seat and see if the build sheet is still there. On '67 GMC's that is about as close as you can get to a SPID label. As mentioned earlier you can check the engine size on the front, left deck area. If it is a 351 Magnum the 4 bolts that join the carb. to the intake will not be of equal distance side to side comparing front set to back set. Also, 351 Magnum exhaust manifolds look like an I-beam, where as standard 351E manifolds are smooth and rounded. __________________ rwgregory 67 GMC 2500 ,2w/d wide box 305 V-6, 4-speed

12-01-2007, 03:49 AM	#11
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,348	Re: Anyone with a V6 motor???? My '67 never had a SPID either. Yes, CS models had the 250 as standard, 292 optional and the CM had the 305 standard, 351 optional. Wish I knew how many '67 351E's were built, but I have been told not too many. There were no U.S. '67 GMC CE pickup models, only panels and Suburbans. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

12-01-2007, 05:36 AM	#12
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Anyone with a V6 motor???? no SPID on my 68 either. it was as basic and un-optioned as possible. I even think the rear view mirror was a dealer installed option.

12-01-2007, 09:30 AM	#13
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Anyone with a V6 motor???? According to GMC Pauls info the M in the model number iidentifies it as a V6. http://www.gmcpauls.com/67-72_gmc.htm This is the only one I have that has any info about the 305 V6 but sadly the date piece is not shown. I wasn't aware that GMC didn't always add a SPID label, guess that why I don't have many of those in my collection. Learn something new everyday, good thread guys! Jeff Attached Images __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-01-2007, 10:10 AM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Anyone with a V6 motor???? WOW, THANKS FOR ALL THE INFO GUYS!!!! I've never noticed a 67 without a spid, but I never get these in very often either. THANKS SO MUCH, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-01-2007, 11:39 AM	#15
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Anyone with a V6 motor???? None on my 67 GMC either



Register or Log In To remove these advertisements.

12-01-2007, 12:55 PM	#16
airdale94 Registered User Join Date: Jan 2007 Location: Topeka,KS Posts: 778	Re: Anyone with a V6 motor???? teeitup-M&M auto salvage in Topeka has a 67-68 GMC v-6 pretty much complete if you're looking for anything.

12-01-2007, 01:38 PM	#18
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Anyone with a V6 motor???? BINGO! L23 is the rpo code! Thats one to save. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-01-2007, 05:42 PM	#20
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Re: Anyone with a V6 motor???? Here's some real good info on the V-6. http://www.6066gmcguy.org/EngineData.htm __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.

12-01-2007, 07:56 PM	#21
LONGHAIR just can't cover up my redneck Join Date: May 2004 Location: Columbus OH Posts: 11,414	Re: Anyone with a V6 motor???? Hey Chris H Did you notice the typo on the label? F51KA... SHOCK ABSORDERS

12-01-2007, 08:09 PM	#22
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,380	Re: Anyone with a V6 motor???? The SPID for the 67 GMC also shows the New Process 435GA instead the typical SM420. Does the 435GA directly bolt on or does it require a different bellhousing? Anyone ever attemped to upgrade to a 435GA?

12-01-2007, 08:24 PM	#23
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Anyone with a V6 motor???? Mine came with the NP435-GA. It will bolt in directly in place of a SM420, although mine happens to be on the V6 bell housing. It has a shift pattern like a SM465 in which reverse is all the way over to the right and down. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

12-02-2007, 03:27 AM	#24
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,348	Re: Anyone with a V6 motor???? The NP435GA was the most common 4 speed behind the V-6's. GMC felt that the ratios were better suited for the V-6, and the 435's torque capacity was higher. The 435 was only used in 4X2's, if the truck was a 4X4, it would have had the SM-420. Also, the 351E was 4X2 only. I did see one 351E with a 3 speed behind it. I think it was an SM-326. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

12-03-2007, 08:14 AM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Anyone with a V6 motor???? No`67 GMC V8s made? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.