bet 300 dollars in auto tech - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70' GMC · 12-06-2007, 11:15 PM

this morning my autotech teacher said every store has them its called a test light and he went to family dollar at around 5 o' clock and he searched that store high and low and then he seen pictures of the products exactly where they go and of course he started talking smack. He is ASE certified and the funny part is he is short and he has blue and we call him blueberry and papa smurf and also his wife is short. He drives a little ol 92' gmc and if I had penny for everytime he talked smack about my 70 gmc I'd be richer than oprah and bill gates put together. and he has the little ol gmc it sounds good but I call the truck a power wheel the toy that kids ride around and charge it also has stick on hood scoops

I SURE HOPE HE GIVES ME MY 300 DOLLARS

**VetteVet** · 12-06-2007, 11:26 PM

They can be found virtually anywhere that has an automotive section.
http://mypage.direct.ca/k/kdomries/testlight.html

jorgensensc · 12-06-2007, 11:29 PM

Hmmm, you may have gotten 300.00 richer, but I wonder how your grades will reflect. The pen is sometimes mightier than the sword. Spend that 300.00 wisely, maybe don't even accept it at all. Papa Smurf was in charge of the clan for a reason, young luke, wisdom.
Shawn

70' GMC · 12-07-2007, 06:28 AM

Well he should have never bet me either way I got 300 dollars. and the reason I bet 300 dollars it would put closer to another GMC like mine. yesterday I went to my lawyer and he won my case and I got $145.00 dollars back and yesterday morning I bet 300 so I could get it.

70' GMC · 12-07-2007, 06:32 AM

I got my report card yesterday and I had 97 in auto tech, 92 in drafting, 95 in constrction tech II, and 60 in geometry. those are not bad grades at all and I sleep in geometry.

space · 12-07-2007, 06:37 AM

And English?

68C15 · 12-07-2007, 06:39 AM

it sounds like the teacher is in a way pushing you for all the right reasons, if ya know what I mean. listen to him and absorb all he has to offer. old techs have a thing about not wanting to share info, take it while you can. and remember there is a difference between knowledge and wisdom.

BTW, from what I have seen ASE stands for "Ask Someone Else" therefor I dont put a lot of stock in those badges.

andrewt2 · 12-07-2007, 07:44 AM

Quote:

Originally Posted by 68C15

BTW, from what I have seen ASE stands for "Ask Someone Else" therefor I dont put a lot of stock in those badges.

LOL i like that. my automotive votech teacher didnt know crap and all of the students in my graduating class reflected it. he pretty much just gave us all A's so we'd past and now most of the guys change oil for a living. lol he however left after our class graduated to sell auto parts for Advance lol

c10addict · 12-07-2007, 08:35 AM

Quote:

Originally Posted by space_cowboy

And English?

You hit the nail on the head!!!

Trying not to be a hater but damn dude!

Tx Firefighter · 12-07-2007, 08:41 AM

It's customary to capitalize the first letter of each new sentence.

jorgensensc · 12-07-2007, 08:43 AM

Quote:

Originally Posted by Tx Firefighter

It's customary to capitalize the first letter of each new sentence.

What do you expect, miracles? We have punctuation now. Baby Steps!

jorgensensc · 12-07-2007, 08:55 AM

Quote:

Originally Posted by 70' GMC

I got my report card yesterday and I had 97 in auto tech, 92 in drafting, 95 in constrction tech II, and 60 in geometry. those are not bad grades at all and I sleep in geometry.

Imagine what your Geometry grade could be if you didn't sleep in class. I am assuming 60 is passing? When I was in school 70 was passing and if I came home with anything less than a "B (80)" my rear was skinned. Don't blow off geometry. It is very helpful with drafting and construction tech.

BB72CHEVKT · 12-07-2007, 09:31 AM

Quote:

Originally Posted by space_cowboy

And English?

Quote:

Originally Posted by c10addict

You hit the nail on the head!!!

Trying not to be a hater but damn dude!

Quote:

Originally Posted by Tx Firefighter

It's customary to capitalize the first letter of each new sentence.

cdowns · 12-07-2007, 10:14 AM

suspension and frame work is geometry// drawing it and making it work are 2 different things

pmpski_1 · 12-07-2007, 11:05 AM

Quote:

Originally Posted by cdowns

suspension and frame work is geometry// drawing it and making it work are 2 different things

That's what I was thinking.

hvychve · 12-07-2007, 01:49 PM

Maybe you ought to listen to what others here said and not take the three hundred $$$ for your own sake, young wipper snappers know it all, send em to school, buy em books and what do they want to do?
Just let the smack roll off your back, as far as a test light, you can make one very easily, and yes they are obtainned at almost anyplace that sells auto parts I have even seen em at grocery stores......

7T2 · 12-07-2007, 02:17 PM

I got all A's in English and I still don't understand this thread.

70' GMC · 12-07-2007, 04:24 PM

Well I went to auto tech this morning and I told him where was "my 300 dollars" and then he made up excuses about so Im not 300 dollars richer or poorer. When my autotech teacher went to my job he said wheres your test lights and are you hiding them. I told him we dont carry them and when he walked through the door at the store he thought he was a big shot with his blue tooth in his ear with little light blinking and his blue suit he had on. I thought Family Dollar was having a "BLUE LIGHT" special. When I get caught sleeping in geometry he "what are you doing pingloo; sleeping" then I say no and the he says "zero for you" and show him all my work and I get a 100. The guy is from New Zealand and you can't understand a word he says.

c10addict · 12-07-2007, 04:30 PM

The guy is from New Zealand and you can't understand a word he says.[/QUOTE]

You sure its him??

ccd3 · 12-07-2007, 04:32 PM

Quote:

Originally Posted by c10addict

The guy is from New Zealand and you can't understand a word he says.

This should be the Webster's dictionary definition of "Irony"

sodak69c10 · 12-07-2007, 04:40 PM

i go to WDTI for automotive technology and i must say my instructors know their stuff, i've learned alot from them, and the older techs at the dealership that i work at

as for the 300 congrats my instructors won't make bets like that

Dingfodgy · 12-07-2007, 04:41 PM

Quote:

Originally Posted by 7T2

I got all A's in English and I still don't understand this thread.

I've read this entire thread and for the life of me can't figure out WTF
70'GMC is trying to say. It has something to do with ASE Certified, Test Lights, 300 bucks, Auto Tech, Family Dollar, Big Shots in Blue suits w/ earbuds, etc....but I can't seem to "connect the dots" and gleen a complete thought / sentence from his posts'.

jorgensensc · 12-07-2007, 04:45 PM

Quote:

Originally Posted by ccd3

This should be the Webster's dictionary definition of "Irony"

70' GMC · 12-07-2007, 04:46 PM

Geometry teacher is from new zealand and my ASE teacher is american.

Ole Blue 68 · 12-07-2007, 04:49 PM

That first post is like a Chinese Finger Trap. I try to pull away but I can't, I have to understand it......

12-06-2007, 11:15 PM	#1
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	bet 300 dollars in auto tech this morning my autotech teacher said every store has them its called a test light and he went to family dollar at around 5 o' clock and he searched that store high and low and then he seen pictures of the products exactly where they go and of course he started talking smack. He is ASE certified and the funny part is he is short and he has blue and we call him blueberry and papa smurf and also his wife is short. He drives a little ol 92' gmc and if I had penny for everytime he talked smack about my 70 gmc I'd be richer than oprah and bill gates put together. and he has the little ol gmc it sounds good but I call the truck a power wheel the toy that kids ride around and charge it also has stick on hood scoops I SURE HOPE HE GIVES ME MY 300 DOLLARS __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible! Last edited by 70' GMC; 12-06-2007 at 11:16 PM.

12-06-2007, 11:26 PM	#2
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,717	Re: bet 300 dollars in auto tech They can be found virtually anywhere that has an automotive section. http://mypage.direct.ca/k/kdomries/testlight.html __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

12-06-2007, 11:29 PM	#3
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: bet 300 dollars in auto tech Hmmm, you may have gotten 300.00 richer, but I wonder how your grades will reflect. The pen is sometimes mightier than the sword. Spend that 300.00 wisely, maybe don't even accept it at all. Papa Smurf was in charge of the clan for a reason, young luke, wisdom. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

12-07-2007, 06:28 AM	#4
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: bet 300 dollars in auto tech Well he should have never bet me either way I got 300 dollars. and the reason I bet 300 dollars it would put closer to another GMC like mine. yesterday I went to my lawyer and he won my case and I got $145.00 dollars back and yesterday morning I bet 300 so I could get it. __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

12-07-2007, 06:32 AM	#5
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: bet 300 dollars in auto tech I got my report card yesterday and I had 97 in auto tech, 92 in drafting, 95 in constrction tech II, and 60 in geometry. those are not bad grades at all and I sleep in geometry. __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

12-07-2007, 06:37 AM	#6
space Registered User Join Date: Aug 2007 Location: Benson-ish, NC Posts: 325	Re: bet 300 dollars in auto tech And English?

12-07-2007, 06:39 AM	#7
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: bet 300 dollars in auto tech it sounds like the teacher is in a way pushing you for all the right reasons, if ya know what I mean. listen to him and absorb all he has to offer. old techs have a thing about not wanting to share info, take it while you can. and remember there is a difference between knowledge and wisdom. BTW, from what I have seen ASE stands for "Ask Someone Else" therefor I dont put a lot of stock in those badges.

12-07-2007, 08:41 AM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: bet 300 dollars in auto tech It's customary to capitalize the first letter of each new sentence. __________________ I'm on the Instagram- @Gearhead_Kevin

12-07-2007, 10:14 AM	#14
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: bet 300 dollars in auto tech suspension and frame work is geometry// drawing it and making it work are 2 different things __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-07-2007, 01:49 PM	#16
hvychve To The Levy Join Date: Jan 2007 Location: california Posts: 391	Re: bet 300 dollars in auto tech Maybe you ought to listen to what others here said and not take the three hundred $$$ for your own sake, young wipper snappers know it all, send em to school, buy em books and what do they want to do? Just let the smack roll off your back, as far as a test light, you can make one very easily, and yes they are obtainned at almost anyplace that sells auto parts I have even seen em at grocery stores......

12-07-2007, 02:17 PM	#17
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Re: bet 300 dollars in auto tech I got all A's in English and I still don't understand this thread. __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD

12-07-2007, 04:24 PM	#18
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: bet 300 dollars in auto tech Well I went to auto tech this morning and I told him where was "my 300 dollars" and then he made up excuses about so Im not 300 dollars richer or poorer. When my autotech teacher went to my job he said wheres your test lights and are you hiding them. I told him we dont carry them and when he walked through the door at the store he thought he was a big shot with his blue tooth in his ear with little light blinking and his blue suit he had on. I thought Family Dollar was having a "BLUE LIGHT" special. When I get caught sleeping in geometry he "what are you doing pingloo; sleeping" then I say no and the he says "zero for you" and show him all my work and I get a 100. The guy is from New Zealand and you can't understand a word he says. __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

12-07-2007, 04:30 PM	#19
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: bet 300 dollars in auto tech The guy is from New Zealand and you can't understand a word he says.[/QUOTE] You sure its him?? __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

12-07-2007, 04:40 PM	#21
sodak69c10 Registered User Join Date: Mar 2007 Location: Rapid City, South Dakota Posts: 285	Re: bet 300 dollars in auto tech i go to WDTI for automotive technology and i must say my instructors know their stuff, i've learned alot from them, and the older techs at the dealership that i work at as for the 300 congrats my instructors won't make bets like that __________________ ,Clint LOUD PIPES SAVE LIVES 69 C-10 short stepside 406 sbc, 02 YAMAHA WR250F, 07 SUZUKI SV650S, 81 Grand Prix 355 sbc, 81 XT 500 YAMAHA

12-07-2007, 04:46 PM	#24
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: bet 300 dollars in auto tech Geometry teacher is from new zealand and my ASE teacher is american. __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!



Register or Log In To remove these advertisements.

12-07-2007, 04:49 PM	#25
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: bet 300 dollars in auto tech That first post is like a Chinese Finger Trap. I try to pull away but I can't, I have to understand it......

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.